Top Dreamlink Thd

Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS with Status Mode LED Indicator

  • Includes: Amplifier. PA Microphone. Bass Remote. Mounting Screws.
  • Features: Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N. 660 Watts (6 x 110 Watts) at 2 ohms 003c 1% THD. 660 Watts (3 x 220 Watts) bridged @ 4 Ohms 003c 1% THD..
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2600 Watts (6 x 440 @ 2 ohms or 3 x 880 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. CH 1 - 6. Low Pass 50Hz - 250Hz. High Pass 50Hz - 250Hz. Full IC-Controlled Protection Circuitry. Fully Adjustable Bass Equalization Control. 2 Ohm Stable Stereo..
  • 4 Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable@ 4 Ohm. 2 CH / 4 CH/ 6 CHInput Mode Selector. Mute and Delay Soft Start System. Remote Dashboard Subwoofer Control. 8 Volt Preamp Circuitry. ELNA Brand Audiophile Quality Capacitors. Status Mode LED Indicator. Frequency Response: 10Hz ....
Check Stock

Rockville Atom P20 Marine/ATV/Car Bluetooth Amplifier 1600w Peak/440w RMS 4 Channel w/Volt Meter, Black

  • Rockville ATOM P20 1600 Watt Peak/440 Watt Dyno-Certified RMS 4 Channel Class AB ATV/Car Stereo Amplifier With Bluetooth..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 110 Watts x 4 Channel .
  • 2 Ohm: 400 Watts x 4 Channel. 4 Ohm: 260 Watts x 4 Channel. 4 Ohm Bridged: 800 Watts x 2 Channel. Digital Voltage Display on Amp. Adjustable Low Pass Filter: 50Hz – 250Hz..
  • Adjustable High Pass Filter: 50Hz – 250Hz. Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue). Rustproof Aluminum heat sink with black hairline finish.
Check Stock

(6) Rockville RKL65MBW 6.5\ 700w Marine LED Speakers+Receiver+Amplifier+Amp Kit

  • ...vel: 90dB @ 1w/1m. Total Diameter: 7.3. Cutout Diameter: 5.6. Total Height: 3.86. Mounting Depth: 2.56. Includes: Amplifier. PA Microphone. Bass Remote. Mounting Screws. RockvilIe RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 1300w RMS.
  • CEA Compliant Power Ratings: 420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N 660 Watts (6 x 110 Watts) at 2 ohms 003c 1% THD 660 Watts (3 x 220 Watts) bridged @ 4 Ohms 003c 1% THD. 420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N. 660 Watts (6 x 110 Watts) at 2 ohms 003c 1% THD. 660 Watts (3 x 220 Watts) bridged @ 4 Ohms 003c 1% THD. RMS Power Ratings 1300 Watts (6 x 220 Watts RMS) @ 2 ohms 1300 Watts (3 x 440 Watts RMS) @ 4 ohm Bridged 780 Watts (6 x 130 Watts RMS) @ 4 ohms.
Check Stock

Alpine R-A75M R-Series Mono Digital Amplifier - 750 Watts x 1 at 2-Ohms

  • Alpine’s Class D Amplifier Circuit with Dual Post-Filter Feedback Loops.
  • CTA-2006-B Power Rating: 500W RMS x 1 (4ohm, 14.4V ≤ 1% THD+N).
  • S/N ratio: >85dB (ref: 1W into 4 ohm), 106dB (at rated power).
Check Stock

Rockville Krypton MF4 2400w Peak / 600w RMS 4 Channel Marine Amplifier Boat Amp

  • Rockville KRYPTON MF4 2400 Watt Peak and 600w Dyno Certified RMS Class AB 4-Channel Marine Amplifier..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 150 Watts x 4 Channels .
  • Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue) . Rustproof Aluminum heat sink with black hairline finish. Stainless steel end panels are rustproof. All screws and mounting hardware are stainless steel and rustproof. Bottom panel is aluminum and rustproof..
  • Marine public address system with microphone with talkover function. All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers. All channels on the amplifier are bridgeable. Digital Voltage Display on Amp..
Check Stock

Rockville RXM-F4 Marine 4 Channel Amplifier 2400w Peak/600w RMS+PA Microphone

  • Rockville RXM-F4 Marine 4 Channel Amplifier 2400w Peak/600w Dyno-Certified RMS +PA Microphone.
  • Features: Rockville RXM-F4 Marine 4 Channel Amplifier 2400w Peak/600w Dyno-Certified RMS +PA Microphone. 2400 Watt Peak/1200w RMS. PA Microphone Included..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 400 Watts (4 x 100 Watts) at 4 ohms and 1% THD+N..
  • 600 Watts (4 x 150 Watts) at 2 ohms 003c 1% THD. 2 x 300 Watts bridged @ 4 Ohms 003c 1% THD. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2400 Watts (2 x 1200 @ 2 ohms or 1 x 2400 @ 4 Ohms)..
  • High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. CH3 & CH4 Low Pass 50Hz - 3KHz. CH3 & CH4 High Pass 15Hz - 1KHzCrossover Bandpass Control. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. ELNA Brand Audiophile Quality Capacitors.. Status Mode LED Indicator. Frequency Response: 10Hz - 40KHz. Microphone Sensitivity: 100dB @ 1w / 1m.
Check Stock

Rockville RXA-F2 2400 Watt Peak / 1200w RMS 4 Channel Amplifier Car Stereo Amp

  • Rockville RXA-F2 2400 Watt Peak / 1200w RMS 4 Channel Car Stereo Amplifier.
  • CEA Compliant Power Ratings: 400 Watts (4 x 100 Watts) at 4 ohms and 1% THD+N 600 Watts (4 x 150 Watts) at 2 ohms < 1% THD 600 Watts (2 x 300 Watts) bridged @ 4 Ohms < 1% THD..
  • RMS Power Ratings 1200 Watts (4 x 300 Watts RMS) @ 2 ohms 1200 Watts (2 x 600 Watts RMS) @ 4 ohm Bridged 800 Watts (4 x 200 Watts RMS) @ 4 ohms.
  • Peak Power: 2400 Watts (2 x 1200 @ 2 ohms or 1 x 2400 @ 4 Ohms).
Check Stock

Rockville dB13 3000 Watt Peak/750w RMS Mono 2 Ohm Amplifier Car Amp

  • Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty..
  • Rockville dB13 3000 Watt Peak/750w Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). - 2 Ohm: 750 Watts x 1 Channel .
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 3000 Watts x 1 Channel. - 4 Ohm: 1800 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch..
  • Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: 90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Frequency Response: 15Hz - 250Hz..
Check Stock

Rockville dB12 2000 Watt Peak/500w RMS Mono 2 Ohm Amplifier Car Amp

  • Rockville dB12 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp.
  • Features of dB12: Rockville dB12 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc).
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 2000 Watts x 1 Channel. - 4 Ohm: 1200 Watts x 1 Channel.
Check Stock

Rockville RXM-F3 1600 Watt Marine/Boat 4 Channel Amplifier Amp+PA Microphone

  • Rockville Rxm-f3 1600 Watt peak/800W RMS Marine class D mono block amplifier..
  • Ceja Compliant Power Ratings: 65 watts RMS x 4 channel @4 ohms and 1% THD+N. 85 watts x 4 @ 2 ohms 003c 1% THD. 2 x 200 watts Bridged @ 4 ohms 003c 1% THD..
  • Rams power Ratings: 800 watts (4 x 200 watts RMS) @ 2 ohms. 800 watts (2 x 400 watts RMS) @ 4 ohm bridged. 500 watts (4 x 125 watts RMS) @ 4 ohms..
  • Peak power: 1600 watts (2 x 800 @ 2 ohms or 1 x 1600 @ 4 ohms). high-speed MOSFET power supply. Studio-grade bipolar output stage transistors..
  • Fully adjustable 12Db/ octave Crossover with differential circuitry. Ch3 & Ch4 low Pass 50Hz - 3Khz. Ch3 & Ch4 high Pass 15Hz - 1Khz. Ch1 & Ch2 high Pass 50Hz - 300Hz, 500Hz - 3Khz (X10)..
  • Crossover Band-Pass control. Fully adjustable 12Db Bass equalizer. 2 ohm stable stereo. 4 ohm mono bridgeable. 3 channel mixed-mono capable..
  • Full ice-controlled protection circuitry. Mute and delay soft start system. High level input with smart auto turn-on..
  • Full ice-controlled protection circuitry. 2 Ch./ 4 Ch. input mode switch. Rica preamp line output. Lena brand audiophile capacitors..
  • 8 Volt preamp circuitry. Status mode LED indicator. Minimum THD at rated power: 003c0.05%. frequency response: 10Hz - 40Khz..
  • Sensitivity: 100Db @ 1W/ 1M. Damping fact....
Check Stock

ALPINE S-A60M 600 Watt RMS Mono Car Audio Amplifier Subwoofer Class-D+Bass Knob

  • (1) Alpine S-A60M 600 Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D. (1) Alpine RUX-KNOB.2 Remote Control Bass Knob For Select Alpine Amplifiers Amps. Specifications:.
  • Alpines Class D Amplifier Circuit. CTA-2006-B Power Rating: 330W RMS x 1 (4ohm, 14.4V 1% THD+N).
  • S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm). THD+N 0.03% (ref 1W info 4 ohm). Frequency Response: 10Hz-400Hz (+/-3 dB). Damping Factor: > 1000.
  • Remote bass knob compatible (requires RUX-KNOB.2, sold separately).
Check Stock

Receiver of Many (Hades and Persephone Book 1)

  • Bluetooth for wireless connectivity. Rated Output Power (1kHz, 1ch driven) 100W (8 ohms, 0.9% THD).
  • Rated Output Power (20Hz 20kHz, 2ch driven) 70W (8 ohms, 0.09% THD).
  • Maximum Effective Output Power (1kHz, 1ch driven) (Jeita) 145W (6 ohms, 10% THD).
  • 4K Ultra HD support, HDR10, Dolby vision, hybrid log gamma and BT.2020.
  • YPAO auto calibration technology for ideal sound, Exclusive Yamaha Cinema DSP technology supports playback of HD Audio (Dolby TrueHD, DTS HD Master Audio, etc.), providing natural and expansive sound imaging.
  • Providing complete compatibility with the latest HDMI standards, this AV receiver delivers transmission of 4K video at 60 frames/second pass through.
  • It also supports HDR (High Dynamic Range) Video including Dolby Vision and Hybrid Log Gamma which provides incredible contrast, smooth tone and rich, bright colors.
Check Stock