Top Drop Forged Double Coupler

Round Nose Pliers-1000V Insulated

  • 003cp003e★POWERFUL GRIP: 003cbr003eMilled Jaws for maximum gripping power.
  • These long nose pliers are also capable of performing delicate tasks of bending, shaping, and placing delicate work pieces.003c/p003e.
  • 003cp003e★EXTRA-LONG REACH PLIERS:003cbr003e003c/p003e 003cp003e Extra long reach pliers are 11” from grip to nose and allow you to reach places you could not reach by hand.003c/p003e.
  • 003cp003e★STEEL BUILD & VINYL GRIPS: 003cbr003e003c/p003e 003cp003eThese drop-forged heat-treated steel pliers are built to last.
  • You can trust them for your toughest jobs, and they will always pull through.
  • Double-dipped vinyl grips provide a comfortable user experience.003c/p003e.
  • 003cp003e★VERSATILE PLIERS:003cbr003e003c/p003e 003cp003e Needle nose pliers are a versatile tool that provides their user with a maximum of power and control.
  • these pliers provide all the power and control you expect, along with extra length to work in hard-to-reach places.003c/p003e.
  • 003cp003e★FULL SPECIFICATIONS: 003cbr003e003c/p003e 003cp003e11 inch long nose pliers.
Check Stock

Ironton Body and Fender Tool 7-Piece Dollie and Hammer Set

  • Removes dings and dents, flattens metal panels, creates outside curves and shrinks metal.
  • (1) Low crown cross-chisel hammer(1) High crown pick hammer(1) Shrinking hammer(1) General purpose dolly(1) Double end dolly(1) Wedge dolly(1) Heel....
  • Forged and polished high-carbon steel construction for dependable, long lasting use.
  • Dollies and hammer heads are constructed from rugged heat-treated, drop-forged steel.
  • Fiberglass handles have non-slip rubberized grips.
Check Stock

BACOENG Standard Tower Kegerator No Tank Beer Conversion Kit

  • ...tput pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gas....
Check Stock

Kegco Standard Tower Kegerator Conversion Kit no Tank - STCK-NT

  • ...remium features! The top gauge indicates output pressure, while the side gauge tells you what’s left in the Co2 tank, so you don’t run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful chrome-plated metal finish and a matching chrome-plated faucet with metal lever, this 3″ diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting..
Check Stock

Kegco BF STCK-5T Standard Tower Kegerator Conversion Kit with 5 lb Co2 Tank, Standard

  • ...cked with premium features. The top gauge indicates output pressure, while the side gauge tells you what's left in the CO2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use.
  • simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and four screws for easy mounting..
Check Stock

Kegco Deluxe Tower Kegerator Conversion Kit - No CO2 Tank - DTCK-542_NT

  • ...features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 12″ SURFACE MOUNT STAINLESS STEEL DRIP TRAY: Designed with style and convenience in mind, this drip tray is constructed from 100% stainless steel and has an attractive brushed finish that will look great on any kegerator. It is dishwasher safe and features a detachable grill for easy cleaning. Because it does not come with a drain, this drip tray is perfect for use where running a drain would be difficult..
  • SINGLE FAUCET STAINLESS STEEL DRAFT BEE....
Check Stock

Kegco Deluxe Tower Kegerator Conversion Kit w/ 5 lbs Co2 Tank - EBDTCK-542_5T

  • ...features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • STAINLESS STEEL SINGLE FAUCET DRAFT BEER TOWER: Popular for outdoor or commercial applications, this top-of-the-line NSF approved 3″ diameter draft beer tower has a beautiful polished stainless steel finish and comes complete with a chrome plated brass faucet with solid brass lever. 5′ of 3/16″ clear beer tubing with nozzle and hex nut assembly and a mounting gasket with screws are also included for quick and easy setup..
Check Stock

Kegco Deluxe Door Mount Kegerator Conversion Kit with 5 lb. Co2 Tank EBDCK-5T

  • ...features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6″ x 4″ door mount drip tray’s clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you’re done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not ha....
Check Stock

Kegco MPK199B-G Guinness Dispensing Kegerator with Black Cabinet and Door

  • ...MPLETE GUINNESS KEG TAPPING KIT: This Kegerator is equipped with a complete direct draw kit for U system domestic kegs, which includes brands like Harp and Kilkenny in addition to Guinness. The kit includes a brand new 15 cu. ft. aluminum Nitrogen tank, a double gauge Nitrogen regulator, a U system lever handle keg coupler, and a 3" diameter polished stainless steel draft tower with a chrome plated stout beer faucet..
  • CHROME PLATED STOUT BEER FAUCET: To allow you to properly pour a glass of Guinness with that famous and unique head, we've included a specialty European Stout Beer Faucet with the dispense kit. This faucet operates by pulling forward and down on the tap handle. A restricted spout with a tiny restrictor disc helps slow down the pour and allows the beer to pour properly, and the disc can be removed if you need to pour a regular beer from the faucet..
  • "U" SYSTEM LEVER HANDLE KEG COUPLER: This kit comes with a commercial grade lever handle keg coupler that is compatible with all U system kegs, including Guinness, Harp, and Kilkenny kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is squeeze the handles together and then push down on the lever handle to properly couple the ....
Check Stock

IDEAL Electrical 35-210 Drop-Forged Hammer - Electrician's Hammer 18 oz. 12-1/2 in. Claw Hammer

  • Professional Hammer: With a durable design to perform across all professional electrical maintenance and repair jobs, this hammer includes IDEAL's lifetime guarantee.
  • Durable Construction: The one-piece drop-forged, tempered steel polished head and handle holds up to the harshest environments with long lasting durability.
  • Premium Grip: The drop-forged hammer includes a comfortable, perforated and anti-vibe grip providing excellent handling.
  • Electrical Design: The hammer includes long, straight claws to simplify the removal of electrical fixtures.
  • Product Specifications: The Drop-Forged Steel Hammer weighs 18 oz. and measures 12-1/2 in. in length.
Check Stock

Stegewop 2-5/16\ Forged A-Frame Trailer Coupler with Trigger Latch SAE Class III 12500 lb for Towing RV, Boat, Camper (Black)(12500LBS 2-5/16\)

  • Channel width: forged A-frame connector ..
  • Class III: Maximum Gross Trailer Weight 12500 lbs..
  • Sturdy for Long Use!：To easily outrun the elements, including rain, snow, mud, road grime, and more, this coupler is made of sturdy metal, making it an excellent boat trailer coupler..
  • Easy to Install ：Durable spring and latch mechanism allows for fast and consistent connections..
Check Stock

BLACK+DECKER Slip Joint Pliers, 2 Pack (BDHT84001)

  • TIGHT GRIP: Slip-resistant tongue and groove pliers.
  • COMFORTABLE GRIP: Oil-resistant, double-dipped grips provide comfort.
  • DURABLE: Drop-forged steel construction for strength and durability.
  • FIT IN TIGHT SPACES: Low profile design allows tools to fit into tights spaces.
Check Stock