Top Dual Z axis Kit

CREALITY Ender 3 S1 3D Printer (Upgraded Ender 3 V2) with Sprite Dual-Gear Direct Drive Extruder CR Touch Auto Bed Leveling Silent Board Filament Sensor Dual Z-axis High Precision 8.6x8.6x10.6inch

  • Sprite Direct Dual-Gear Extruder: The "Sprite" direct dual gear extruder developed by Creality 3D has two chrome steel gears that are switched with a gear ratio of 1: 3.5. With a force of up to 80N, the extruder achieves a smooth and even feed and extrusion of filaments without slipping and is ideal for printing flexible filaments such as TPU. With a weight of only 210g, the "Sprite" is lighter than other direct extruders and is characterised by lower inertia and more precise positioning..
  • CR Touch Auto Bed Levelling: The CRTouch 16-point auto levelling technology saves you from the effort of manual levelling. The intelligent levelling system automatically compensates for the print height of various points on the heated bed..
  • Removable PC Spring Steel Platform: The innovative printing platform is a combination of a PC coating, a spring steel plate and a magnetic plate that immediately adheres to the surface when it is detached. The PC coating ensures good adhesion and easy removal of the printed models by bending the surface..
  • Ultra-Quiet 32 Bit Motherboard：The brand new 32-bit silent board runs at low....
Check Stock

Official Creality Ender 3 S1 Pro 3D Printers with 300℃ High Temperature Hotend All Metal Direct Drive Extruder, CR Touch Auto Leveling Bed, Spring Steel PEI Build Plate, Printing Size 220x220x270mm

  • 【"Sprite" Direct Dual-gear Extruder】Creality Ender-3 S1 Pro 3D Printer Equipped Brand-new self-developed "Sprite" direct dual-gear extruder features two chrome steel gears . The extruder realizes smooth feeding and discharging of filaments without slipping and works extremely well in printing flexible filaments such as TPU. Compared with other direct extruders, the "Sprite" is lighter and features less inertia and more precise positioning..
  • 【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling system can automatically compensate the error height (accuracy ±0.04mm) at different points of the printing bed, which effectively improves the model printing quality and printing success rate, and makes leveling bed more easily more precise..
  • 【Filament Breakage Detecting and Power Off Resume Printing】Ender-3 S1 Pro features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste ....
Check Stock

Creality Sermoon D1 3D Printer Silent Motherboard Double Z-axis Sheet Metal Base 4.3-inch Touch Screen Large Printing Size 280 x 260 x 310mm

  • Silent Mainboard&Excellent Extrusion Kit: Sermoon D1 equipped with self-developed 32 bit silent mainboard, which makes it possible to enjoy your....
  • Industrial-grade Printing: Semi-closed chamber with sheet metal base features provides higher stability and a silent printing environment. Aluminum....
  • Double Z-axis: Sermoon D1 use the double Z-axis design concept. By using double z-axis, T-type double screw rod, V-wheel synchronous component and....
  • Convenient and smart: Sermoon D1 is endowed with 45 degree installed 4.3-inch Color Touch Screen, which makes it easy to view and operation. The....
  • What you will get: A Ceality Sermoon D1 3D printer which combines perfect fusion of modern aesthetics and technological, lifetime technical....
Check Stock

Comgrow ROBO Table CNC Router Machine with GRBL Offline Control,3-Axis Engraving Milling Machine 300x180x45mm Working Area for Carving Cutting Plastic Acrylic PCB PVC Wood Aluminum brass

  • 【Upgrade Comgrow CNC ROBO 】Comgrow cnc router 3 Axis 42 stepper motor are X/Y/Z Axis power, the axis moves more smoothly. 775 spindle motor up to 10000r/min. and comes with short circuit protection, no need to worry about module damage..
  • 【CUSTOMISED SETTINGS】Metal CNC machine cutter Full Aluminum Alloy tray Working area: 30x18x4.5CM. Meets most of the engraving needs.
  • 【AUTOMATIC TOOL-SETTING】CNC Router for metal aluminum copper can calibrate the zero of the Z axis autonomously, with the functioning of embedded sensors During the engraving process, there is no need to manually adjust the height of the Z axis to make the drill touch the surface of the engraved object.
  • 【 a wide range of projects and materials】the comgrow cnc router machine Capable of cutting and engraving all types of plastics, soft aluminum, Copper, woods, acrylics, PVCs, PCBs and MDF, the setting parameters of different materials can refer to the product page below middle"".
  • 【more Simply Assemble and Use】This table cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and SD Card of all the files. Please let us know if you need any help ..
Check Stock

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

ADIMLab Gantry Pro 3D Printer 24V Power 310x310X410 Build Volume Resume Print Run Out Detection Lattice Glass Platform Modifiable to Upgrade to Auto Leveling&WiFi

  • 90% pre-assembled 3d printer, dual Z-axis motors and dual Y-axis tracks, supply eccentric nuts to fasten the X/Y/Z pulleys or carriages, make the....
  • Titan direct extruder and dual fans to cool the hot end, make the extruder system more stable and wear resistant. The operation is more convenient....
  • Lattice glass is on hot end, make it easy to leveling and first layer stick and get off, the connector for the bed wire will be strong enough to....
  • Supply resume print and filament run out detection functions, Customer can upgrade the auto leveling& touch screen& wifi functions by self,....
  • ADIMLab Gantry Pro 3d printer includes: ◆The hot bed with Lattice Glass Platform ◆24V15A UL Certified Power supply ◆Titan....
Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

ANYCUBIC Chiron 3D Printer Semi-auto Leveling Large FDM Printer with Ultrabase Heatbed Suitable for 1.75 mm Filament TPU Hips PLA ABS etc / 15.75 x 15.75 x 17.72 inch 400x400x450mm

  • Large Build Volume, ANYCUBIC Chiron 3D Printer comes with one of the largest build volume of 15.75 x 15.75 x 17.72 inches, you can print models that....
  • Semi Auto Leveling and Resume Print, Equipped with an auto leveling module which automatically detects 25 points, supports real time adjustment....
  • Easy to Assemble and Use, Full metal body, stable and durable, modular design and only take 5-10 minutes to assemble, TFT Touch Screen with brand new....
  • Printing Precise and Safe, Equipped with Y Axis Dual Sideway and Z axis dual screw rod design, the height on both sides of the Z axis will be....
  • More Function, Ultrabase Pro, Coated with a special composite coating make the printed large model not easy to warp and easy to demold, All ANYCUBIC....
Check Stock

Genmitsu 3020-PRO MAX CNC Router Machine for Metal Carving and more, GRBL Offline Controller, with Limit Switches & Emergency-Stop, XYZ Effective Working Area 300 x 200 x 72mm (11.8 x 7.9 x 2.8inch)

  • Bigger and better with an all new extra rigid and beefy design featuring an increased Z Height of 72mm dual steel X axis guide rails, all aluminum spindle holder and 300W spindle. All these upgrades make metal carving easier, ideal for an endless variety of drilling, and carving operations on various metals, like brass, copper and 6061 aluminum, etc..
  • Upgraded linear guide structure and 4040 Y axis profiles highly improve the engraving accuracy and processing strength, eliminating Z axis wobble issues that most other desktop CNC machines have..
  • One-piece machined and molded aluminum design ensures flatness and strength of the work platform. Integrated measurement scale is convenient for material positioning. The platform is compatible with most of the CNC clamps on the market..
  • Everything you need out of the box. The Genmitsu 3020-PRO MAX router already includes all of the accessories and components you need at an affordable price, including offline controller, XYZ axis limit switches, emergency stop switches, Z-probe and more..
  • The pre-assembled module of XZ Axis Gantry and Base A....
Check Stock

Creality CR-30 3D Printer with Infinite Z-Axis Printing Creality 3DPrintMill CoreXY 3D Printer with Silent Board Filament Sensor and Dual Gear Metal Extruder

  • INFINITE Z-AXIS FOR ENDLESS PRINTING - Equipped with the rolling conveyor belt, the Creality CR30 enables you to print “infinitely” on the Z axis....
  • ROLLING CONVEYOR BELT - The wear-resistant conveyor belt on the CR30 features excellent layer adhesion. In addition, prints will fall off....
  • STABLE CORE-XY STRUCTURE - The stable and sturdy Core-XY precision structure with isosceles right triangle support gives you an extraordinary printing....
  • DUAL-GEAR METAL EXTRUDER - High-quality dual-gear metal extruder, provides better grip and filament pushing force, allows for large filament spools,....
  • EXCLUSIVE PRINTING SOFTWARE - This Creality 3d printer has its own printing software, Creality Belt, which is specially formulated for unlimited 3D....
Check Stock

Creality CR-10S 3D Printer FDM Upgraded Metal Extruding Unit Dual Cooling Fan Silent Motherboard Meanwell Power Supply 300x300x400mm (Orange)

  • ❤ Big Printing Size ❤ Print and show your creation up to 300x300x400 mm (11.8″ x 11.8″ x 15.8″), with a single print or split and join it in as many parts as you like..
  • ❤ Resume Printing ❤ Resume printing let your prints can be resumed from the last layer if power off or lost, saving time and reducing filament waste..
  • ❤ Upgraded Dual Z Axis ❤ Feeling in control with its upgraded dual Z Axis Leading Screws.
  • high positioning accuracy, move smoothly and print faster..
  • ❤ Suit for Everyone ❤ Affordable for both beginners and professionals with great printing quality to start your 3D printing project..
  • ❤ Satisfaction Service ❤ For technical support, please reach us via Amazon message rather than ” Creality Official Support Center “, cause our customer service will respond to you within 24 hours no matter what question..
Check Stock

Creality CR-30 3D Printer 3DPrintMill Infinite Z Belt Printer Continuous Belt CoreXY Motion Upgraded 32-bit Silent Board Dual Gear Metal Extruder Cosplay Props Print Farm

  • Infinite-Z-axis for Endless Printing: Equipped with the rolling conveyor belt, the CR-30 enables you to print “infinitely” on the Z axis for large....
  • Rolling Conveyor Belt: The wear-resistant conveyor belt on the CR-30 features excellent layer adhesion. In addition, prints will fall off....
  • Stable Core-XY Structure: The stable and sturdy Core-XY precision structure with isosceles right triangle support gives you an extraordinary printing....
  • Dual-gear Metal Extruder: High-quality dual-gear metal extruder, provides better grip and filament pushing force, allows for large filament spools,....
  • Exclusive 3DPrintMill Slicer: Specially designed slicer CrealityBelt is available for download. It prioritizes ease of use and thus makes it easier....
Check Stock