Top Electric V type Ball Valve

Weber Q2400 Electric Grill , Grey

  • 1560-watt electric heating element to heat 280 square-inch total cooking area.
  • Porcelain-enameled cast-iron cooking grates and cast aluminum lid and body.
  • .Dimensions (Inches) Lid Open : ( H x W x D) - 26 x 31.5 x 25.1(Inches).
  • :Dimensions - Lid Closed (inches) 14.5 H x 31.5 W x 19.5 D.
  • Fully assembled out of box, Infinite control burner valve settings. Fuel type-Electric. Power-1,560 W/120 V.
  • 6-foot grounded cord. The appliance should be supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30 mA.
  • 3D interactive assembly instructions for this product are available through the free BILT app..
Check Stock

Robinair 18560 A/C and Refrigeration Valve Core Remover/lnstaller

  • Robinair Air Conditioning Valve Core Remover and lnstaller - the ideal tool for replacing damaged valve cores or performing A/C or refrigeration service that necessitates valve core removal.
  • Attaches to 1/4 inch male flare access fittings and allows valve core removal and replacement without loss of refrigerant.
  • Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve.
  • Ball valve features a corrosion resistant stainless steel ball for smooth action and a reliable seal.
  • Durable brazed side fitting allows system access for various A/C service procedures.
Check Stock

Cen-Tec Systems 93070 Central Vacuum Kit with Switch Control Hose, 35 Ft, Silver

  • The 93048 is compatible with air turbine nozzles and all major brands of central vacuums including Beam, Electrolux, Eureka, Vacuflo, Vacumaid, MD, Cyclovac, Canavac, Hayden, Star Power, and Imperium. The hose is compatible with air turbine nozzles and 1.25 inches accessories of all types.
  • The 93070 permits remote activation of the central vacuum through the low volt contacts exposed in the inlet valve opening. It does not connect to 120 V power permitting the use of an electric power.
  • The lightweight highly flexible hose is made in the usa and is designed to power on and off the central vacuum power unit through industry standard pin jack inlet valves. The hose will work with standard accessories and any of the industry air turbine nozzles. It is not for use with an electric power nozzle.
  • The package comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a usa-made hard floor brush.
  • To confirm this package will work with your inlet valves you can confirm there are two small contact points located in your inlet valve on either the top half or bottom half of the inlet valve opening.
Check Stock

12 Pieces Ball Pump Needle Set Needle Inflator Kit Needle Nozzle Adapter Inflator Kits for Air Frame Pump Needles Adaptor Bikes Tire Sports Ball Air Bump Inflating Needle Adapter

  • Quality material: this inflator kits for air frame pump needles adaptor is made of quality metal and plastic, strong and durable, not easy to get break, allow you to use them for a long time..
  • metal needle adaptor is approx. 1.7 x 0.9 x 0.7 cm.
  • Richer ball pump needle set: The package offers you 12 accessories, includes 2 piece of metal ball needle, 4 pieces of plastic nozzles with metal thread ,4 piece of metal adapter (American type to French type,) and 2x Aluminum Alloy Valve Caps, suitable for electric or manual air pump..
  • Easy to store: These needle inflator tools are in general size and design, which don’t take up too much space and are good accessories for compressors, electric air pumps and almost any hand pumps. It surely will bring more convenience to your life..
  • Material size: The metal ball pump needle is approx. 38 mm in length, 7 mm in outside diameter, 4 mm in inside diameter.
  • Wide range of usage: you can apply this set of needles with pump to inflate inflatable toy, balloon, basketball, gym balls, sports equipment, bicycle tires, etc..
  • the size of the plastic nozzles with metal thread: 7mm in outside diameter..
Check Stock

BestTong Micro DC 12V-24V 10000RPM 775 Motor Ball Bearing Large Torque Dual Output Shaft High Power Low Noise Brushed DC Motor for Electrical Tools DIY

  • DC 12V 24V round shaft 775 electric motor, with dual accuracy ball bearing.
  • Note: The motor starting current needs to be 10A.
  • With copper wire production, durable for using. Easy to wire and install. Durable construction for long-lasting performance. Wide applied to electric tools, electric fans, electric cleaners, etc. Small size but large torque.
Check Stock

Ellbest 1/2" Electric Solenoid Valve 2W-160-15 AC110V Brass Valve NC Normally Closed Valve for Water, Air, Gas

  • High quality electric solenoid valve, for water, air or oil.
  • Durable brass construction and a high quality copper solenoid are made to last..
  • This valve is N/C (normally closed), meaning it is closed when power isn't supplied..
  • It's applicable in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.).
Check Stock

Firelong Accurate Ball Pressure Gauge Heavy Duty Metal Made,Test and Adjust The Pressure for Football Soccer Rugby Basketball Volleyball and Other Balls

  • Dial type pressure gauge ensures accurate inflation of all types of athletic & recreation balls..
  • Gives reading in both Kg per square centimeter and PSI scales.Maximum pressure range up to 15 psi or 1 kg/cm².
  • Solid full metal body construction that is built to last.Chrome plated brass stem with USA type needle.
  • Push-type air release valve to easily release pressure to prevent over-inflation..
  • Simply insert the needle into the ball valve and you can take a reading in seconds. It works for all inflatable balls: soccer ball, football, rugby ball, basketball, volleyball, water polo ball, etc..
Check Stock

DAN SPEED 2 NPT Female 316 Stainless Steel Full Port Ball Valve Vinyl Handle WOG1000

  • Body & Ball Type:Full Port, Low Operation Torque,316 Stainless Steel.
  • Serviceable Valve - Can be taken apart via threads, Female NPT Ports.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.
  • Nominal Working Pressure:1000 WOG, Max 1000 psi for Water, Oil, Gas, Temp Range:-60F to 450F,Fluid Medium For use with liquids and gases.
Check Stock

iMeshbean® Deep Well Submersible Pump,1 hp, 115V, 60 Hz, 33 GPM, 207' Head, Stainless Steel, 4\

  • ★【Technical Specifications】4"，1HP, 115V, 10.2 Amps , 60 Hz,1-1/4” NPT discharge. 8 Impellers；Fits in a 4" casing..
  • ★【Economy & Effective】33GPM max & 207ft head；33′ lengthy electric cord -allows for easy connection，.
  • ★【Outstanding Performance】Stainless steel body& thermoplastic impellers -industrial grade heavy duty - guarantees high durability and long-lasting use.
  • ★【Widely Application】 Perfectly convenient for use at home and for factory usage.
  • can be implemented in different types of wells-ash pipe wells, steel pipe wells, or soil wells；Can be used for extracting water from reservoirs, canals, rivers, open water tanks and other water lifting works.
  • ★【 Built-in Controlbox & Check Valve】This item is with a built-in control box, it is for thermal protection, short-cut protection and overload protection；★【NOTICE】This pump has a built in check valve. However installing additional check valve is recommended.
Check Stock

HONEYWELL GIDDS-296123 V8043E1061 24V 3/4

  • Honeywell V8043E1061 Sweat Nc Zone Valve, 24V, 3/4 In..
Check Stock

VARMHUS NPT Female 316 Stainless Steel Full Port Ball Valve Vinyl Handle WOG1000 (1-1/2")

  • Body & Ball Type:Full Port, Low Operation Torque,316 Stainless Steel.
  • Serviceable Valve - Can be taken apart via threads, Female NPT Ports.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.
  • Nominal Working Pressure:1000 WOG, Max 1000 psi for Water, Oil, Gas, Temp Range:-60F to 450F,Fluid Medium For use with liquids and gases.
Check Stock

BUSIDN 3 inch 76mm Stainless Steel Electric Exhaust Cutout Motor E-cut Valve Kit , Catback Single Y Pipe with One Controller Remote Kit

  • Design to Instantly Increases 20-30 horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. Electrically controlled exhaust valves outflow, simply by flipping the switch..
  • Voltage: 12V. Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. the valve motor is NOT WATERPROOF, Please don’t start work in heavy rain or extremely cold weather.
  • Pipings-Made of high quality T-304 stainless steel with computerized. Mandrel-Bends for strength and durability.
  • 3.0 Inch Electric Exhaust Cutout Valve Kit For all types of vehicles. pls make sure you have enough space to install it.Professional installation is highly recommended.
Check Stock