Top Electrode Material

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

Denso (4507) PQ16TT Platinum TT Spark Plug, (Pack of 1)

  • Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
  • Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
  • Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.
Check Stock

Reboot Welding Electrode Holder 300AMP Copper Heavy Duty Jaw Holding Plier Electrode Clamp of Welding Machine ARC Welder American Design

  • Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity..
  • Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc..
  • Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet.
  • 100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance..
Check Stock

Jacazooy Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable

  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use..
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth..
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion..
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force..
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error).
Check Stock

Bonsicoky 2Pcs Ground Bus Bar Terminal Block, 5 Terminal Positions Wire Screw Terminal Brass Electrical Grounding Bars Block

  • 【Better electrical performance】: The excellent electrical conductivity of the copper material on the surface of the copper-clad steel grounding electrode makes its own resistance value much lower than that of conventional materials..
  • 【Wide range of applications】: Copper-clad steel grounding electrodes are suitable for grounding construction under different soil moisture, temperature, PH value and resistivity changes..
  • 【Low construction cost】: Compared with the traditional construction method of pure copper grounding rod and grounding strap, the cost of copper-clad steel grounding electrode is greatly reduced. (Moreover, it has the strength that the pure copper ground rod cannot reach)..
  • 【Unique manufacturing process】: The copper-clad steel grounding electrode adopts a cold-rolled and hot-drawn production process to achieve metallurgical welding between copper and steel. So as to ensure the perfect combination of copper layer and steel layer, it can be drawn arbitrarily like drawing a single metal without disjointing, peeling and cracking..
  • 【Superior corrosion resistance】: The copper clad steel ground electrode composite interface adopts high temperature 4D electroplating, the surface copper layer is ≥0.254mm/10mils, there is no resi....
Check Stock

ECG/EKG Adult Limb Electrode for 3.0 Plug/4.0 Banana Plug -4 Pieces/Set (Gray)

  • ECG/EKG Limb electrode ,universal connection for 3mm pin , 4mm banana pin.
Check Stock

SK20HR11 3421 Iridium Spark Plugs Replacement For Lexus GX460 Toyota Benz Tundra SET (8)

  • Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
  • Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
  • Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.
Check Stock

Body Machine,Skin Care Anti Aging Device Facial Massager,Bọdy Ṣhạping Device ẸMṢ Tool

  • ❤ Advanced controller with micro-computer system and digital display.Five different pulse waveforms provide 5 kind of massage intensity, auto....
  • ❤ Ten pairs of silicon gel electrode pads with ultra strong ELECTRICAL CONDUCTIVITY and INFRARED. Ten groups of electrode pulse outputs，....
  • ❤ Attaching the electrode pads by elastic bandages, without shedding.Can use on Neck and Shoulder,Arms, Breast, Belly, Back, Hips, Legs, etc. Good....
  • ❤ Tightening and relaxing muscle to make it do aerobic exercise in order to decompose and consume fat and redundant energy inside body,prevent the....
Check Stock

Oumefar Welding Electrode Clamp, 400 Amp Twist Type Holder Welding Electrode Rod Holder Welding Electrode Twist Type Full Copper (Black)

  • COMPACT DESIGN ---- Welding electrode holders have strict quality control and quality assurance, compact design, small size, and the handle conforms to ergonomic design, and the work experience is more labor-saving..
  • FAST AND CONVENIENT ---- Type Holder Welding Tool has excellent workmanship and practicality, 400~500A universal, welding electrode clamp is more convenient to choose welding rod, which will help you to weld materials quickly and conveniently..
  • USED FOR ---- The welding Twist Type Full Copper holder adopts advanced technology and exquisite craftsmanship, and welding electrode clamp is not hot for long-term welding. Welding electrode clamp is used as a welding electrode holder for various rod electrodes..
  • WELDING ELECTRODE CLAMP ---- Type Holder Welding Tool have 1 x electrode holder, 1 x hex wrench, 1 x spacer and 1 x spacer post in the package. You can choose from black and yellow to meet your needs..
  • SERVICE ---- We launch products that meet your needs, and you will get our 100% problem-free guarantee. Customer's smile is our first goal,if you have any question,....
Check Stock

NGK (5542) PFR6T-10G Laser Platinum Spark Plug, Pack of 1

  • You can depend on NGK for quality and reliability.
  • Includes laser welded platinum tip on center electrode and platinum tip on the ground electrode.
  • Taper cut reduces the voltage necessary and provides better throttle response.
Check Stock

iStim Super Soft 2'x2' TENS Unit Electrodes for TENS Massage EMS - 100% Japanese Gel (2'x4' - 16 Pieces)

  • iStim ELECTRODE PAD: Use high-grade, and biocompatible SEKISUI Japanese gel, which facilitates efficient conducting of the electrical stimulator’s current to the patient’s skin in a dispersed manner. With spunlace non-woven cloth, it enhances the softness of the electrode and makes it be highly stretchable and flexible. Thus, iStim Electrode pads can be stuck to any parts of the skin tightly. Carbon Film and Carbon Fiber Wire provide great conductive surface to stabilize electrical conduction.
  • JAPANESE GEL: Japanese Sekisui Gel pads can be used up to 15 times if properly used. 100% SEKISUI Gel is the harmless ingredients and the best fit for even sensitive skin users. Highly Recommend: Use iStim premium quality electrodes with iStim TENS/EMS unit, making your every pain relief treatment more effective with perfect experience. [NOTE: DO NOT USE Extra Electrode Gel].
  • UNIVERSAL COMPATIBILITY: iStim electrode pads use standard 2mm pigtail connectors which is wide compatible with most mainstream TENS units, EMS massagers and muscle stimulators. iStim adhesive electrode pads are the best replacement accessories for your TENS/EMS device..
  • APPROVAL: OTC approved, no prescription needed. Pass SGS biocompatibility test, RoHS and LATEX-FREE test. Made in Taiwa....
Check Stock

Hanna Instruments HI 98130 Waterproof pH/Conductivity/TDS Tester with ATC, High Range

  • Waterproof floating tester measures pH, high-range EC/TDS, and temperature for hydroponics, agricultural, and water-quality testing applications.
  • pH electrode is replaceable, has a stainless steel snap-in connector that prevents bent or broken pins, and a renewable cloth junction that extends electrode life.
  • Graphite conductivity electrode eliminates contamination by salt deposits in solution.
  • Power management features include battery life displayed at startup, automatic shut-off, and battery error prevention system that alerts user when battery is low.
  • Accessories include pH electrode, electrode removal tool, and four 1.5V batteries.
Check Stock