Top Engine Oil Pump Priming Tool

Mxmoonant 12V Oil Transfer Pump, 3.2GPM Self Priming Oil Change Extractor Pump, Fuel Transfer Pump with Hoses for Diesel Kerosene Marine Boat Truck

  • [STRONG SUCTION & LOW NOISE] This electric gear oil pump has a self-priming range of up to 3m/10ft, and the max flow is up to 3.2GPM/12LPM. When the machine is working normally, the sound is around 55-60db. In addition, it is also equipped with shock-proof rubber mounting feet, which can greatly reduce the working noise..
  • [HOSE INSTALL] This fuel transfer pump is small in size and easy to carry, making it convenient to install in various directions in a limited space. The port diameter is 3/8’’ (10mm), which can meet most of the hoses on the market. Of course, if you don’t have the right accessories for a while, we also include a one-meter black oil hose and two fixing clips, which can help you transport in time and bring you a better experience..
  • [TRANSFER & CHANGE] This oil change pump has a vacuum self-suction function, which is generally used in the liquid replacement and transfer of large trucks, engineering vehicles, harvesters and small refueling equipment, including diesel, engine oil, lubricating oil, kerosene and other high-viscosity oily liquids.【Tip】Except gasoline petroleum fuel..
  • [OVERHEAT PROTECTION] This oil transfer pump has a built-in overheating protector. And if there is an abnormality such as overheating and overload,....
Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock

LUMAX LX-1336 Red Plastic Bucket Pump with Flex Hose and Non-Drip Nozzle. 5-6.5 Gallon (20-25 L) Capacity. Self-Priming, Push-Down Action Pump. Discharge Capacity: 3 Fluid Ounces per Stroke.

  • Push-down action pump that fits 5 gallon pails.
  • Precision buna-n seal that eliminates by-pass.
  • 50 inches flex hose has non-drip nouncezle.
  • 3 fluid ounce per strokeDescriptionThe plastic bucket pump with flex hose and non-drip nozzle is a plastic bucket pump with zinc-plated steel tube for transferring non-corrosive fluids of light to medium viscosity like, engine oil, gear oils, transmission fluid, automotive additives, machine oil, etc. It is a self priming, push-down action pump that fits 5 gallon pails, has a drain-back nozzle that prevents spills and accidents, a precision buna-n seal that eliminates by-pass, a nylon piston for durability, and a zinc plated, corrosion-resistant suction tube. It includes a 50 inches oil-resistant flex hose with non-drip nozzle, has a 1 inches inlet port, and a 1/4 inches outlet port. The discharge capacity is 3 ounce per stroke..
Check Stock

DRIVESTAR M383 Engine Oil Pump 1996-2000 for Honda Civic,1996-1997 Civic del Sol 1.6L

  • Fitment:Oil Pump for Honda Civic 1996 1997 1998 1999 2000 1.6L.
  • Replacement Oil Pump Number:M383,MA-371 oil pump.
  • Deliver Oil:The oil pump can deliver a fixed quantity of pressurized oil to the engine, and keep it running smoothly. Which mean that your engine could always get the right amount of oil pressure, and the critical engine parts wouldn’t be rub together, or cause extensive and damage.
  • Strict Ex-Factory Testing:All products are manufactured in accordance with the international automotive spare parts production specifications, and passed strict testing before leaving the factory to ensure that each product quality is superior.
  • Note:When the certain engine parts don’t get enough oil, the engine may start to make tapping, knocking or rattling noises. Loss of oil pressure can prevent a vehicle from starting. And it’s time for a replacement of your failing oil pump..
Check Stock

Oil Transfer Pump Extractor, Electric Oil Pump Fast Oil Change Transmission Fluid Extractor Pump, 12v 60w Diesel Fluid Scavenge Suction Pump for Changing Oil, Boat, Tubes, Truck, RV, ATV, Riding Mower

  • QUICKEST, CLEANEST OIL CHANGE EVER! - Oil Pump for Oil Change. Helps bleed diesel engines after filter change essential tool. Suck up to pump, good to go! Just get the motor warm. Turn it off and turn on the oil pump extractor. Its that easy. It drains to the last drop. Makes your oil changes that much quicker and cleaner. Worked great to suck out old brake fluid, differential fluid, gear oil, transmitting fluid..
  • POWERFUL SUCTION OIL FUNCTION- This high efficient battery powered oil extractor pump is easy to pump various fluids and oils. Easy to put together, all the hoses came with it. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery, ran the small hose down the dipstick tube and turned it on, and press the button. Simple On/Off Power Switch, easy to use. Great for a quick oil change..
  • DIFFICULT OIL EXTRACTION NO MORE - The 12v Oil Change pump extractor are very easy to use and makes a top down oil change so easy. Ideal diesel fluid oil transfer pump extraction equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore..
Check Stock

LUMAX Black LX-1300 Lever Bucket 5 Gallon Pails. Smooth, Easy Pumping Action dispenses All Types of Lubricants, Even in The Coldest Weather

  • Portable - clamps to any 25-50 pounds/ 5 gallon pail.
  • All steel pump has 1-1/2 inches inlet and 1/2 inches outlet port.
  • Zinc plated corrosion-resistant suction tube.
  • Self-priming delivers 1 quart per 12 strokes.
  • 5 feet oil resistant flex hose with curved nouncezleDescriptionThe lever-action bucket pump uses smooth, easy pumping action and dispenses all types of lubricants, even in the coldest weather. It is ideal for transferring motor oil, transmission fluid, differential fluid, heavier oils and other automotive additives. Rust resistant ribbed cover assembly firmly clamps to any 25-50 pounds / 5 gallon pail using adjusting screws to accommodate variations in drum diameter. This all steel pump has an 18 inches x 1-1/2 inches zinc plated, corrosion-resistant suction tube with a 1-1/2 inches inlet and a 1/2 inches outlet port and a 5 feet oil resistant flex hose with curved nozzle. The head of the pump is made of heavy-duty, lucast, cast-alloy material which is heavier and has a reinforced wall thickness for extra strength and durability. This pump is self-priming , delivers 1 quart per 12 strokes, and has a pump lever with an oil resistant, contoured grip for comfort and safety..
Check Stock

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

  • Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
  • 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
  • Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
  • Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
  • Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
Check Stock

Generac 6917 CW10K Clean Water Pump with Hose Kit, 1", Orange

  • Lightweight design with ergonomic carry handle.
  • Onboard instructions with icons of key touch points make this pump easy to use.
  • Easy Prime custom funnel design with tethered priming cap for quick and easy priming.
  • Easily pumps up to 30 gallons per minute.
Check Stock

8mm 5/16 Black Primer Bulb Rubber Fuel Pump Transfer Vacuum Fuel Hand Primer Gasoline Petrol Diesel Pump for Marine Boat Accessories

  • For introducing fuel into the fuel pump after replacement of the fuel filter..
  • Simple and effective tool for priming engines on cars, motorcycles and boats..
  • Suitable for Carburettor and low pressure fuel systems.
  • Be made of rubber and aluminum material, durable, oil proof and aging resistance..
Check Stock

M295 Standard Volume Oil Pump - Compatible with 4.8L, 5.3L, 6.0L Chevy Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon, Cadillac Escalade - Replace M295, 12696357, 12586665

  • M295 STANDARD VOLUME OIL PUMP - A mechanical device that circulates oil to the bearings, camshaft and pistons of an engine. A failed oil pump will cause low oil pressure, engine overheat, and unusually noise from the engin. If you notice any of the symptoms, you will need to have your oil replaced..
  • FIT THE FOLLOWING VEHICLES - Standard volume & standard pressure oil pump compatible with 4.8L 5.3L 5.7L 6.0L GM Vortec V8 engine oil pump, induding Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020..
  • REPLACE PART NUMBER - Replace GM 12696357, 12586665 oil pump, replace Melling M295 oil pump. Commonly found on Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier with 4.8 5.3 5.7 6.0 V8 Vortec Engine..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or Melling oil pump, but it works even better and lasts longer. Save yourself times and money ....
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

DRIVESTAR M340 Engine Oil Pump 2004-2008 for Ford F-150/Expedition/Explorer/Mustang,for Lincoln Navigator/Mark LT 5.4L 4.6L

  • Fitment:Oil Pump for Ford 2005-2014 Expedition,2006-2010 Explorer,2007-2010 Explorer Sport Trac,2004-2010 F-150,2005-2010 F-250 F-350 Super Duty,2005-2010 Mustang,for Lincoln 2006-2008 Mark LT,2005-2014 Navigator,for Mercury 2006-2010 Mountaineer.
  • Replace Oil Pump Number:M340,2244-3663,9L3Z-6600-A,3L3Z6600AA oil pump.
  • Deliver Oil:The oil pump can deliver a fixed quantity of pressurized oil to the engine, and keep it running smoothly. Which mean that your engine could always get the right amount of oil pressure, and the critical engine parts wouldn’t be rub together, or cause extensive and damage.
  • Strict Ex-Factory Testing:All products are manufactured in accordance with the international automotive spare parts production specifications, and passed strict testing before leaving the factory to ensure that each product quality is superior.
  • Note:When the certain engine parts don’t get enough oil, the engine may start to make tapping, knocking or rattling noises. Loss of oil pressure can prevent a vehicle from starting. And it’s time for a replacement of your failing oil pump..
Check Stock