Top Ev6f Fuel Injector Connectors

Engine Fuel Injector Removal Tool Puller for Land Rover Range Jaguar 5.0L V8

  • Injector Removal Tool Puller for Land Rover 5.0 3.0.
  • Easy Remove Fuel Injector: Usually, Injectors on vehicles are very tough to pull in general , but this tool could easy remove fuel injector, Improve efficiency, save a lot of time, it's possible to remove injectors from a Range Rover without it, is a must tool for remove fuel injector.
  • Application: This fuel injector remover tool compatible with Land Rover/Jaguar 3.0 5.0 petrol engine, fit for Jaguar X150, XK Series, X250(XF) and XJ models (V8 5.0lt petrol engines). fit for Land Rover Discovery 4, new Range Rover, Range Rover Sport (V8 5.0lt petrol engines), replace OEM 310-197.
  • Exceed OEM Design: Our fuel injector remove tool improved on the basis of OEM, our design more easy to use, give auto repair engineers a better experience.
  • Quality Guarante: This fuel injector remover tool made of high qualuty steel, high hardness and strong endurance to ensure that it is still intact after high-strength impact, and we offer lifetime warranty..
  • Tips: Before use, please tighten the nut at the end of the slider to prevent it from slipping off during use.Hold slight downward pressure on the locking clasp as u use the slide hammer to pop the injector free,that will get better results.
Check Stock

FICM Engine Fuel Injector Complete Wire Harness - 5C3Z9D930A - Compatible with for Ford Powerstroke 6.0L Diesel 2003 2004 2005 2006 2007 F250 F350 F450 F550 Excursion -Black

  • [REPLACEMENT FUEL INJECTOR CONTROL MODULE (FICM) HARNESS ] - This wire harness connects the fuel injectors on your 6.0 Powerstroke diesel engine to....
  • [EXCELLENT FUNCTION OF THIS HARNESS] - This is a complete wire harness with all connectors. If your truck is experiencing injection fault codes,....
  • [FITS THE FOLLOWING VEHICLES] -This wire harness fits for Including model years 03, 04, 05, 06, 07..
  • [REPLACES PART NUMBER #] - Replaces part number 5C3Z9D930A and 5C3Z-9D930-A. While this is a not a genuine part, it is a direct replacement for the....
  • [VEHICLE TYPE COMPATIBILITY] - Fuel Injector Jumper Wiring Harness fits for Powerstroke Diesel FICM..
Check Stock

HiSport Fuel Injector Seal Kits Include O-rings, Pintle Caps, Seal Spacers and Filter Baskets Universal Repair Set Replaces 0280150962 [8 Set]

  • [COMPATIBILITY] This fuel injector rebuild installation kits combination is a universal kit, compatible with the most commonly used injectors 0280150943 0280150955 0280150962.Compatible with Ford V8 5.4L 4.6L Fuel Injector Service Repair Kit Seals Pintle Caps Filters..
  • [PACKAGE INCLUDES] This fuel injector repair kits include 8 micro filters 101, 16 injector O-ring 203, 8 injector retaining pintle caps 308, 8 injector spacers and 8 injector seal..
  • Micro Filters CF101-( 6X3X12mm), Injectors O ring 203 -(7.5X3.5mm), Injector retaining pintle Cap 308 - 12X8X6.5mm, Injector spacers seal 307 - (12.6*8.4*2mm), Injector seal 302 - (13X11X1.3mm).
  • [QUALITY CONTROL] This fuel injector repair installation kits set is 100% testing during the manufacturing process. o rings are made by FKM VITON material, it resistants high temperature which more than 200 degrees. All Items tested for reliability, durability..
  • [SATISFACTION] HiSport ensures brand new and high-quality products. In terms of any problem with this product, please contact us, our friendly assistants will always be available to help you within 24 hours..
Check Stock

TABODD Non-dismantle Fuel Injector Cleaner Kit 800ML, Automotive Non-dismantle Fuel Injector Tester & Cleaner Fuel System Fuel Injector Cleaner Tool Set for Petrol Cars(0-145PSI)

  • This injector clean kit includes many different adapters, thus covering almost all the EU, Asia, USA cars and light trucks..
  • The system not only features with high and low pressure cleaning function. At the same time it could also clean the whole fuel system including throttle valve, fuel nozzle and combustion chamber..
  • Non-dismantle fuel injector has anti-corrosion, anti-friction connectors for fast-connection and anti-friction oil tubes for all cleaning fluid， clean liquid is not included in the package..
  • The key parts of aerospace seals, corrosion resistance, wear-resistant fatigue..
Check Stock

HPI 03-07 LS Vortec Standalone Harness 4.8 5.3 6.0 Drive by Wire Green/Blue PCM & MULTEC/Delphi Fuel Injector CONNECTORS 4L60E DBW

  • WE SHIP PRIORITY MAIL. DELIVERED WITHIN 5 DAYS (GREEN/BLUE PCM CONNECTOR & MULTEC/DELPHI FUEL INJECTOR CONNECTORS) (for ev1 or ev6 injector connectors....
  • These are after market harnesses and ready to ship (WE CAN SOLVE 99% OF ANY PROBLEMS. SO PLEASE CONTACT US BEFORE OPENING A RETURN REQUEST).
  • These harnesses are designed for retrofitting '03 - '07 Vortec engines (4.8, 5.3, 6.0-Liter) and 4L60E transmissions into older muscle cars and street....
  • 36" ADDED LENGTH FOR EASY COMPUTER MOUNTING Made in the USA.
  • 1200 Degree Fiberglass Braid on All Circuits Ran by Heat.... All Factory CPA (Connector Position Assurance Locks.
Check Stock

New Injection Pump 6738-71-1520 4063844 Fit for Cummins 6BT5.9 Engine Zexel

  • Includes tools to remove fuel injector sleeves, clean the injector bore and fuel galley, and install injector sleeve cups.
  • With the head removed, the slide hammer adapter can be installed to pull the injector.
  • Brush set properly cleans the injector bore which is required for the fuel injector sleeve cup installer to properly seat the cup.
  • Applications include: 2006-2009 4. 5L Diesel, 2004-2010 6. 0L Diesel.
Check Stock

Design Engineering 010378 Fuel Rail and Injector Cover Kit for Jeep (1997-2004, 4.0L Engine)

  • Designed for 1997-2004 Jeep models with inline 6 motor.
  • Reduces fuel rail and injector heat sink, reduces the chance of vapor lock, and keeps fuel cool.
  • Easy to install kit includes one manifold heat shield, one fuel rail heat cover, size fuel injector covers, and 12 fuel injector O-rings.
  • The heat shield is a glass fiber-backed heat barrier with thick aluminum skin.
  • The fuel rail and injector covers are designed to reflect engine heat.
  • the hook and loop design makes for easy installation.
Check Stock

Fuel Injector Removal Puller Kit Injector Seal Install Tool Compatible with Volkswagen TDi 4 Cyl 8V 16V Diesel Replacement for Audi VW 1.2 1.4 1.6 1.8 2.0 2.7 3.0 3.2 3.6 V6 4.2 V8 FSI TSI TFSI Petrol

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock

Ultrasonic Fuel Injector Cleaner Machine & Fuel Tester 4 Cylinders 110V, CATUDIY Fuel Injector Cleaner Tool for Diesel Fuel System Cleaner Diagnostic Tester for Motorcycle Automotive Gasoline Test Kit

  • 【Ultrasonic Cleaner & Simulating Testing】The injector cleaner machine is a mechatronics automotive tool that combines ultrasonic cleaning technology and microcomputer oil pressure closed-loop control cleaning & detection technology. To simulate various realistic operating conditions of the engine, This fuel tester cleans and detects the fuel injectors of various automobiles and motorcycles.
  • 【Heated & Reusable & Effective】The fuel injector tester improves a lot of cleaning effect by heating reusable and recyclable cleaning fluid, which is money saving and eco-friendly. With 1.3L large capacity ultra cleaning tank, to perform ultrasonic cleaning on single / multiple injectors simultaneously, the auto cleaner can eliminate thoroughly blockages on the injector accessories and internal parts.
  • 【Portable & Humanized Design】The mini ultrasonic cleaner only weighs 8kg, easy to carry. Equipped with LED display, pressure gauge, glass tubes, testing liquid level gauge and multifunctional control panel, the injector pulse tester allows easy operation through its clear menu, and real-time monitoring of fuel injector detection and fuel dynamic value....
Check Stock

AUTOOL Flush Cleaner Adapter for Car Fuel Injector Tester Fuel Pump Pressure Test Automotive Diesel Gas Injectors Nozzles Unlimited Pulse Cleaner

  • Main Usage: As an adapter for DIY cleaning the fuel injector nozzle, removed the injector from the engine, it can be cleaned separately. When the injector is clogged, you can use it to save expensive nozzles,This DIY Injector Cleaner adaptor kit is easily to clean most car motorcycle fuel injectors.Universal fit any 12 - 24V car, motorcycle, electric car, ATV, Boat and so on..
  • Working principle:The electrical port of the Injector connect the 12V power by this cable. When the current is switched on, the solenoid valve in the nozzle is opened. Meanwhile cleaning liquid flush through white tube by liquid pressure in CARB cleaner bottles, then through injector to clean it..
  • Working requirements: It needs the combination of 12V DC power supply and aerosol of Injector or carburetor cleaner ( not included ). Please prepare these necessary tools.
  • The package consists of two white tubes and two alligator clip charging cables, which accommodate 2 different sizes of fuel injectors..
  • Need a fuel jet cleaning agent aerosol cans (not included) and DC 12V DC battery power (not included), do not need compressed air..
Check Stock

HiSport Fuel Injector Rebuild Service Kits for Universal EV1 Engines Injector O-Rings, Injector Spacers, Injector Retaining Pintle Caps, Injector Micro Basket Filters - 6 pcs/pack

  • [COMPATIBILITY] This fuel injector rebuild installation kits combination is a universal kit, compatible with the most commonly used injectors 0280150943 0280150955 0280150962..
  • [PACKAGE INCLUDES] This fuel injector repair kits include 6 micro filters 101, 12 injector O-ring 203, 6 injector retaining pintle caps 308, 6 injector spacers and 6 injector seal..
  • [INFORMATION] Micro Filters CF101-( 6X3X12mm), Injectors O ring 203 -(7.5X3.5mm), Injector retaining pintle Cap 308 - 12X8X6.5mm, Injector spacers seal 307 - (12.6*8.4*2mm), Injector seal 302 - (13X11X1.3mm).
  • [QUALITY CONTROL] This fuel injector repair installation kits set is 100% testing during the manufacturing process. o rings are made by FKM VITON material, it resistants high temperature which more than 200 degrees. All Items tested for reliability, durability..
  • [SATISFACTION] HiSport ensures brand new and high-quality products. In terms of any problem with this product, please contact us, our friendly assistants will always be available to help you within 24 hours..
Check Stock

LAUNCH CNC-603A Ultrasonic Fuel Injector Cleaner and Tester 110V Automotive Fuel Injection Systems Cleaning Machine for All Petrol 6 Cylinder [Update of LAUNCH CNC602A]

  • [Wide Range of Applications]: LAUNCH CNC603A car fuel injector tester and cleaner upgraded from LAUNCH CNC602A, and it has a good compatibility. Supported most cars and motorcycles to ‘clean’ and ‘test’ fuel injectors..
  • [Leading Technology]: At present, only LAUNCH TECH produces this portable and multi-functional automobile fuel injector cleaning and testing machine, and it has obtained a special patent..
  • [Why Need It]: Due to the fuel quality, the injector cannot work normally, causing serious carbon deposits in the cylinder, accelerating the cylinder bore and piston ring, causing unstable idling, increased fuel consumption, weak acceleration, difficulty in starting, excessive emissions, and complete blockage of the injector, cause damage to the engine, so the injector should be cleaned regularly..
  • [Easy to Operate]: When cleaning or testing, fix the car injector in the socket of the washing tank, add an appropriate amount of cleaning fluid, and the cleaning can be completed after power on.
  • when testing, fix the car injector in the oil separator and add it to the glass tube industrial alcohol, the test or clean can....
Check Stock