Top Exhaust Flared Outlet Tips

AUTOSAVER88 3 Inch Exhaust Tip, 3' Inlet 4.5' Outlet 9' Overall Length Chrome-Plated Finish Tailpipe Stainless Steel Exhaust Tips for 3' O.D. Tailpipe, Rolled Edge Slant Angle Cut, Bolt On, Universal

  • Dimension: standard 3″ x 4.5″ x 9″ (inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel， our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound.
  • meanwhile, the chrome-plated finish would give your car a new & sporty appeal.
  • Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 1.75-2.25 Inch Adjustable Dual Exhaust Tip, 1.75'-2.25' Inlet 3' Outlet 8.66' Long Stainless Steel Double Layer Exhaust Tail Tip for 1.75'/2.0'/2.25' O.D. Tailpipe, Bolt On, Black Plating

  • Dimension: 1.75-2.25 inch adjustable inlet diameter.
  • universal fits 1.75″/2.0″/2.25″ outside diameter exhaust pipes whatever its Year/Make/Model is (Note: please measure dimension to make sure the outside diameter of your tailpipe is between 1.75-inch and 2.25-inch before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the light black plating finish gives your car a new & sporty appeal.
  • Easy installation: Bolt-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

4 inch Inlet Diesel Truck Tailtip, 8 inch Outlet Exhaust Tip, 15 inch Length Muffler Tip, Rolled End Angle Cut

  • Dimension: standard 4" x 8" x 15"(inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (Notice: Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0" before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated and polished finish would make your car tailpipe shine brightly.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

IFOKA Exhaust Tip 2.5 Inch Inlet 2.5 Inlet 2.5 Outlet 9 Long Black Exhaust Tips Turn Down Diesel Stainless Steel Powder Coated Finish Tailpipe Extension Bolt On Design Pipe Down

  • Dimension: Black exhaust tips 2.5" inlet, 2.5 inches outlet, 9 inches overall length. Universally compatible with vehicles which have exhaust pipes....
  • Material: Stainless steel with black powder-coated surface treatment, prevent corrosion, high-temperature resistance, and not easy to scratch & fall....
  • Easy to install: Before the installation, cleaning the tailpipe and exhaust tips are necessary. The bolt on design make it easy to install, and not....
  • Unique Driving Experience: Angle cut and turn down design, more thicker inner waller design makes the vehicle sounds rumble and crackle, give you the....
  • Rustproof Design: Angle cut on the bottom of the exhaust tip, not easy to accumulate water and avoid rust effectively. In order to prolong the service....
Check Stock

Exhaust Tips Stainless Steel, Car Exhaust Tail Muffler Tip Pipes Muffler Modification, Inlet 2.5″ Outlet 3.2″ Polished Finished Tail Pipe, Auto Replacement for Most Cars Sedans Trucks (Black/Straight)

  • 【Protect Exhaust Pipes】: This tail pipe protects your original exhaust pipe, prevents it from deformation, and protect it from rain, dust and sand. It also cancels noise. With this exhaust pipe protector, you will have a better driving experience. There is a small hole at the bottom of the tip that can be used to drain water, with this hole there will be no standing water..
  • 【Car Decoration】: This exhaust tips is available in two colors, matte black and gold, this exhaust pipe is beautiful and generous, can decorate your car well and make it look more stylish. After installing this exhaust pipe, your car will look very sporty, the black one is understated and generous, the gold one is stylish and dynamic..
  • 【Dimensions】: The length of it is 5.7″, inlet size is 2.5 inch while outlet size is 3.2 inch. It is suitable for straight pipe models with an exhaust pipe diameter of less than 2.5″. Crimmed and angled cut design, black powder coated. There are two kinds of exhaust tips for you to choose, straight shaped and curved shape exhaust pipes can totally meet your demand..
  • 【Material】: This exhaust pipe is made of stainless steel with slanted tip shape. Due to its stainless steel material, it is durable and corrosion resistant. It protect yo....
Check Stock

Exhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Check Stock

Autarboor Exhaust Tip 3 Inch Inlet, 3' Inlet 4' Outlet 12' Long Mirror Polish Stainless Steel Bolt-On Exhaust Tailpipe Tip Slant Cut, Rolled Edge

  • 【Dimension】 Standard with 3 inch Inlet, 4 inch outlet, 12 inch overall length, bolt-on exhaust tips. Universally applicable to vehicles with 3 inch outer diameter of exhaust pipe..
  • 【Special Design】With elaborately mirror polished to keep your vehicle look cool style and new shiny look instead of the rusted old tailpipe. Slant cut design can drain your exhaust tailpipe timely.
  • 【High-grade Material】Made of high quality material stainless steel, strong anti-corrosive, durable exhaust tip, can greatly protect your original pipe from the sun and rain, avoid rusting and deformation.
  • 【Easy installation】Bolt-On exhaust tip don’t require welding or drilling operations, just simply slide the exhaust tip into the exhaust pipe and tighten it with a wrench.
  • 【Warranty】12 months warranty: Feel free to contact our customer service if you have any problem with our product.
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....
Check Stock

JWWY Stainless Steel Exhaust Muffler Tail Pipe Trim Cover for 2015-2022 Dodge Charger Exterior Accessories

  • Package: There are two pieces of 2.5 inches inlet exhaust tips in the package..
  • Specifications: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches diameter inlet exhaust pipes..
  • Material: The Apeixoto exhaust tailpipe tip is constructed with 304 stainless steel. It has a much more shinny and beautiful surface. There is a blue burnt end on the tip. It looks very fashionable and powerful. This types of stainless steel also is rust and corrosion resistant. It will keep your vehicle always in a good look..
  • Installation: Please be noted that these tailpipes are weld on designed. A professional installation would be recommended. Good installation will make the tailpipe function better..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

AUTOSAVER88 1.5-2.5 Inch Exhaust Tip, 1.5"-2.5" Inlet 4" Outlet 9" Long Blue Burnt Stainless Exhaust Tip with Clamps and Adapters Fit for 1.5"/1.75"/2.0"/2.25"/2.5" Outer Diameter Tailpipe, Bolt-On

  • Dimension: Standard 1.5"-2.5" x 4" x 9" (inlet, outlet, and overall length).
  • Fits for cars with 1.5"/1.75"/2.0"/2.25"/2.5" outside diameter exhaust pipes, no matter what its model is (Please make sure the outside diameter of your car tailpipe is between 1.5-inch and 2.5-inch before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel with blue burnt finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of ....
Check Stock

AUTOSAVER88 4 Inch Inlet Exhaust Tip, 4' Inlet 6' Outlet 15' Long Chrome Polished Finish Stainless Steel Universal Exhaust Tail Tip for 4' Outside Diameter Tailpipe, Rolled Angle Cut, Bolt On, Silver

  • Dimension: standard 4″ x 6″ x 15″(inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound.
  • meanwhile, the chrome polished finished offer your car with a a new & sporty appeal.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

GEATaaT Black Chrome Exhaust Tip Compatible With 2005-2022 Toyota Tacoma Replace# PT932-35180-02

  • Product Dimensions: 2-1/4In Inlet X 3-3/4In Outlet X 9In Long.
  • Slanted Tip Shape. 3 Bolt Clamping System, Inlet: 2.25 Inch, Outlet: 3.75 Inch, Length: 9 Inch. Cut Type: Slant Cut.
  • Resonated Tips Are To Enhance Sound Output.
  • 100 Percent Stainless Steel With Flat Black Finish.
  • Coated Stainless Steel Resonated Bolt-On Exhaust Tip- Black.
Check Stock