Top Exhaust Machine

DNA MOTORING CBE-HP92-NRT Cat Back Exhaust System [Compatible with 92-96 Honda Prelude]

  • 【FITMENT】Compatible with 92-96 Honda Prelude.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】4"(Od) rolled Muffler tip/ 3"(od) inlet/ 14mm thick double walled tips.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

DNA MOTORING CBE-NM00-NRT Stainless Steel Cat Back Exhaust System [Compatible with 00-03 Nissan Maxima]

  • 【FITMENT】Compatible with 2000-2003 Nissan Maxima.
  • 【Quality Construction】Made of 16-Gauge Aluminized Steel for Increased Performance to Value. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】4" OD Sized Piping, 5" OD Polished Round Slant Rolled Muffler Tip.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

4 inches Round Muffler Rolled Tip Catback Exhaust System Compatible with Silverado Sierra 1500 4.3L 5.3L Extended Crew Cab 14-19, Stainless Steel

  • ▶️ This cat-back exhaust is compatible with Chevrolet Silverado 1500 2014-2018, Chevrolet Silverado 1500 LD 2019, GMC Sierra 1500 2014-2018, GMC Sierra 1500 Limited 2019, fits with 4.3L 5.3L extended and crew cab models, does NOT fit 2WD crew cab models with 2pc drive shaft..
  • ▶️ Come with [1] high performance racing design dual exit cat-back exhaust, it can maximize to enhance the high exhaust air flow rate without sacrificing the attractive power sound in the smoothest conditions..
  • ▶️ Made of high quality stainless steel with computerized mandrel-bends for strength and durability, and the TIG welded CNC machine can resistant against pressure and corrosion. All those material can guarantee the reliable performance in any circumstance..
  • ▶️ Easily for the installation, can make you enjoy the best performance in the fastest time..
  • ▶️ Major Piping: 3" OD | Muffler Exhaust Tip: 4" OD | Inlet: 3" OD | Outlet: 2.5" OD | Round Diagonal Cut Rolled Tips.
Check Stock

DNA MOTORING CBE-CCOL04-28L Stainless Steel Cat Back Exhaust System [Compatible with 04-12 Chevy Colorado]

  • 【FITMENT】Compatible with 04-12 Chevy Colorado.
  • 【Quality Construction】Made of high quality t-409 Stainless Steel with computerized mandrel-bends for strength and durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】2.5" OD mm inlet/ 2.5" OD mm main piping.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

DNA MOTORING CBE-NTT07-56L Stainless Steel Cat Back Exhaust System [Compatible with 04-15 Nissan Titan]

  • 【FITMENT】Compatible with 04-15 Nissan Titan.
  • 【Quality Construction】Made of high quality aluminized Steel with computerized mandrel-bends for strength and durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】Piping inlet size: 3" ID.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

NEWTRY Pneumatic Hole Puncher 5mm Air Metal Hole Punch Tool Industrial Sheet Metal Punching Gun Heavy Duty Metal Hole Flange Opener for Doors & Windows, Factory, Office and Home

  • ...inuously please press the button longer..
  • ▷ [WIDE RANGE OF APPLICATION]---This type of industrial air hole punching machine has a wide range of uses, which can be used for office decoration, shop christmas decoration, installation engineering, door and window drainage, door and window furniture punching, etc..
  • ▷ [EXHAUST MUFFLER PORT & 360° ROTATING PUINCH]---Inlet size: 1/4".
  • the perforated gun body has an exhaust muffler, which can reduce the exhaust noise of the punch and provide you with more comfort work environment, but it is still recommended to wear headphones to protect your ears when using it. The punch of the air punch can be rotated 360°at any angle, The firing pin is forged from a special alloy steel material, which is durable and has sharp impact..
  • ▷[PARAMETER RANGE]---This metal punching airtool is suitable for stainless steel, iron, aluminum and other metal materials. The recommended thickness: stainless steel≤1.0mm.
  • the machine shearing force can reach 708kg/1557lbs. The striker is forged from high-strength alloy steel and can be stamped instantly..
  • ▷ [PRECAUTIONS]---Please note that the firing pin is a consumable, so it is recommended to be replaced after a period of use, and this type of door and win....
Check Stock

DNA MOTORING CBE-HP97 Cat Back Exhaust System [Compatible with 97-01 Honda Prelude Coupe 2.2L]

  • 【FITMENT】Compatible with 1997-2001 Honda Prelude Coupe 2.2L.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】Tip diameter: 4. 5" OD mm/ inlet: 2. 5" ID/ removable silencer included.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

Tsudo 08 09 10 11 Lancer De/Es/GTS N1 JDM Axleback Exhaust V2

  • Manufactured from T304 / SUS304 stainless steel for durability and high corrosion resistance.
  • CNC machine mandrel-bent stainless steel tubing for maximum exhaust flow.
  • Significant weight reduction compared to OEM exhaust system.
  • Improves horsepower, torque, throttle response, and fuel mileage.
  • Includes all necessary hardware (bolts and gaskets) for Bolt-on installation with typical hand tools.
Check Stock

DNA MOTORING CBE-FM96GTV8 Stainless Steel Cat Back Exhaust System [Compatible with 96-04 Ford Mustang GT V8]

  • 【FITMENT】Compatible with 96-04 Ford Mustang GT V8.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Long Term Durability】TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

DNA MOTORING CBE-IS300-NRT Stainless Steel Cat Back Exhaust System [Compatible with 01-05 IS300 Altezza XE10]

  • 【FITMENT】Compatible with 01-05 IS300 Altezza XE10.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】3" OD mm inlet/ 2.5" OD mm main piping.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

DNA MOTORING CBE-NM04V6-D-NRT Stainless Steel Cat Back Exhaust System [Compatible with 04-08 Maxima]

  • 【FITMENT】Compatible with 04-08 Maxima.
  • 【Quality Construction】Made of High Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】4"(OD) Muffler Tip / 2. 5"(ID) Inlet / Removable Silencer Included.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

Tsudo 08 09 10 11 Lancer De/Es/GTS N1 Titanium Tip Axleback Exhaust V2

  • Manufactured from T304 / SUS304 stainless steel for durability and high corrosion resistance.
  • CNC machine mandrel-bent stainless steel tubing for maximum exhaust flow.
  • Significant weight reduction compared to OEM exhaust system.
  • Improves horsepower, torque, throttle response, and fuel mileage.
  • Includes all necessary hardware (bolts and gaskets) for Bolt-on installation with typical hand tools.
Check Stock