Top Exhaust Tailpipe Tips
Apeixoto 2.0 2.25 2.5 Inch Adjustable Inlet Exhaust Tip 4 inch Outlet 9 Inch Long Polished Stainless Steel Exhaust Tip with Bolt On Design
- Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter within 2.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
- Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes..
- Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
- Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
- Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check StockApeixoto 2.5 Inch Inlet Exhaust Tip 2.5″x4″x12″ Exhaust Tip Blue Burnt Chrome Plated Finish Stainless Steel with Bolt On Design
- Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
- Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes..
- Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel and end is bule burnt chrome plated. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny and fancy. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
- Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
- Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assist.
Check StockApeixoto 2.75 Inch Inlet Exhaust Tip 2.75 Inches Inlet 3.5 Inches Outlet 12 Inches Long Polished Stainless Steel Exhaust Tailpipe Tip Bolt On Design
- Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.75 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
- Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.75’’ x 3.5’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 3 inches outlet diameter exhaust pipes..
- Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a cut edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
- Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
- Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check StockDsycar Universal Stainless Steel 1.5 - 2.25 Inlet Exhaust Tip - Fit Pipes Diameter 1.5 - 2.25 inch Adjustable Car Decoration Chrome-Plated Finish Exhaust Tailpipe Tip 3.3 Outlet 5.4 Long
- 【 Measure Your Tailpipe Diameter】Please measure the outside diameter of your exhaust pipe before purchase, otherwise our product will not fit your....
- 【 Note 2 】Please check your original tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type..
- 【 Note 3 】View product details image,Understand the installation and size of the product, can view the other seven exhaust pipe products,Choose....
- 【Easy to Install】 There is no need to replace any parts,No weld needed. No drill needed.Super Easy to Install! Three Bolt Fit the tip to your....
- 【Car Decoration】Surface polishing process. The most important thing for us is that you 100% love your purchase. Tips again, please measure your....
Check StockAUTOSAVER88 1.5-2.5 Inch Exhaust Tip, 1.5"-2.5" Inlet 4" Outlet 9" Long Blue Burnt Stainless Exhaust Tip with Clamps and Adapters Fit for 1.5"/1.75"/2.0"/2.25"/2.5" Outer Diameter Tailpipe, Bolt-On
- Dimension: Standard 1.5"-2.5" x 4" x 9" (inlet, outlet, and overall length).
- Fits for cars with 1.5"/1.75"/2.0"/2.25"/2.5" outside diameter exhaust pipes, no matter what its model is (Please make sure the outside diameter of your car tailpipe is between 1.5-inch and 2.5-inch before purchase).
- Anti-deformation & rustproof: built from high-grade stainless steel with blue burnt finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
- Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
- Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed.
- Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of ....
Check StockUpower Dual Exhaust Tips 2.25 inch inlet 3 inch outlet 9.2" Long Vacuum Plating Blue 304 Polished Stainless Steel Weld on Staggered Exhaust Tailpipe Tips 2.25" to 3"(Pack of 2)
- 【Design】2.25 ID Weld On - Double Wall Angled Cut - Rolled Edge-Staggered-Offset Exhaust tips.
- 【Material】Mirror Polished T304 Stainless Steel Exhaust Tip.High Quality Vacuum Plating Blue.Durable and Anti-corrosive,never Rusty..
- 【Wide Application】Universal fits trucks pickup car with 2.25" INLET Exhaust Tailpipe Tips system. NOTICE: Before purchasing, Pls kindly check the size of your factory exhaust tip..
- 【1 Year Warranty】Pack of 2 dual exhaust tips.
- No instruction is included. Professional installation is highly recommended..
Check StockSODMLZ Car Accessories Heart Shaped Universal Car Exhaust Muffler Tip Stainless Steel Pipe Chrome Exhaust Tail Muffler Tip Pipe (Colour)
- 【Wide Application】Entrance: 2.4 inches, Exit: 3.6 inches, Total length: 6.4 inches,Universal fits 61mm/2.4inch Inlet diesel trucks pickup car tailpipe system.
- 【Illuminated Exhaust Pipe】 Fashionable and dazzling, high temperature resistant LED lamp, there will be blue flame effect after installation, and it is very cool at night.Creative design with LED lights can produce amazing visual effects. I believe you will fall in love with it..
- High Quality】 The tip of the rear design with Durable stainless steel,strong corrosion resistance,High temperature resistance,during and waterproof ,save your energy and time.
- 【Easy Installation】No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench.
- 【LOW NOISE】 Increase exhaust pressure and reduce exhaust noise effectively 【Tips:】 1. The distance between the tail throat and the bumper should be greater than 2cm to avoid burning the bumper at high temperatures. 2. Wear gloves during installation, just in case you are injured. 3. Do not install this product on a car that has just been stopp....
Check StockAUTOSAVER88 2.5 Inch Dual Exhaust Tip, 2.5" Inlet 3" Outlet 9.5" Long Chrome Polished Stainless Steel Double Wall Exhaust Tail Tip for 2.50" Outside Diameter Tailpipe, 2 1/2 Inch Exhaust Tip, Weld On
- universal fits 2.5" outer diameter of trucks car exhaust tailpipe (please make sure the outlet outer diameter of your vehicle tailpipe is 2.5" before purchase).
- Anti-deformation & rustproof: Built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
- plus, a drainage hole helps drain water to prevent rust.
- Stylish & pleasant-sounding: Sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound.
- meanwhile, polished finish offer your car with a new & sporty appeal.
- Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
- Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check StockVechkom 2.5'' 63MM Inlet Carbon Fiber Car Exhaust Muffler Tip with Red LED Light Stainless Steel Muffler Car Exhaust Tip Modification Luminous Tube
- 【Wide Application】Entrance: 2.4 inches, Exit: 3.6 inches, Total length: 6.4 inches,Universal fits 61mm/2.4inch Inlet diesel trucks pickup car tailpipe system.
- 【Illuminated Exhaust Pipe】 Fashionable and dazzling, high temperature resistant LED lamp, there will be red flame effect after installation, and it is very cool at night.Creative design with LED lights can produce amazing visual effects. I believe you will fall in love with it..
- 【High Quality】 The tip of the rear design with Durable stainless steel,strong corrosion resistance,High temperature resistance,during and waterproof ,save your energy and time.
- 【Easy Installation】No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench.
- 【LOW NOISE】 Increase exhaust pressure and reduce exhaust noise effectively 【Tips:】 1. The distance between the tail throat and the bumper should be greater than 2cm to avoid burning the bumper at high temperatures. 2. Wear gloves during installation, just in case you are injured. 3. Do not install this product on a car that has just been stopped or started to avoid being burned by the exhaust pipe..
Check StockYonput 1 PC 2.5 Inch Inlet Exhaust Tip, 3.3" Outlet 5.7" Overall Length, Stainless Steel Black Powder Coated Exhaust Tailpipe, Rolled Angle Cut, Car Universal for 2.5" OD Tailpipe (Bending)
- Dimension: 2.5 inch inside diameter inlet, 3.3 inch outside diameter outlet, 5.7 inch overall length. Please make sure the outside diameter of your car tailpipe is 2.5-inch before purchase..
- High Quality: The stainless steel exhaust tail is made of high quality stainless steel with strong anti-corrosive, it effectively resist heat, rust and deformation to protect and decorate your tailpipe system well..
- Stylish Design: Black powder coated surface treatment, high temperature resistance, not easy to scratch and fall off. Sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound..
- Easy Installation: Bolt On Installation, not easy to screw off, no drilling or welding needed..
- Maintenance Tips: Please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips to keep the surface clean..
Check StockABN Exhaust Pipe Expander Tool - Tail Pipe Expander Exhaust Expander, Exhaust Pipe Stretcher Kit 1-5/18 to 4-1/4 Inch
- [Increase Engine RPM]: Expanding your tailpipe with the ABN Exhaust Tube Expander Tailpipe Expander Kit to increase exhaust volume and to give you more power for your engine.
- [Easy to Use]: Lubricate all parts of the exhaust pipe bender stretch tool and attach correct sleeve.
- Insert pipe spread tool into pipe, connect to existing drill, and expand.
- Pipe might need to be warmed during winter months to prevent damage while using exhaust flare tool.
- [Expand Most Metals]: Tailpipe expander tool kit great for all types of pipes, from aluminum to stainless steel.
- Exhaust pipe expanding tool can expand piping from 1-5/18 to 4-1/4 inches (3.3 to 10.8cm).
- [Easy Storage]: HVAC pipe expander parts come in a plastic storage case to keep the steel and copper pipe expander kit organized.
- [Contents]: Exhaust pipe expansion tool kit includes a 3/4-inch and 1/2-inch (1.9 and 1.3cm) shank collet expander chuck, 5 expander sleeves, and 2 packs of black rubber O ring replacements.
Check StockPVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle
- 【Effectively Cut Tailpipes】 Work on tailpipes and exhaust pipes with diameters ranging up to 3.15"/83 mm. Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
- Cut tailpipe and exhausts on or off the vehicle with ease for making repairs or installing catalytic converters.
- 【Cut Pipes Easily】 Cut pipe with our pipe cutter tool in four easy steps.
- Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
- 【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
- 【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
- Cushioned for comfort and non-slip security.
- 【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from duri....
Check Stock