Top External Thread

220V Self Priming Water Pump Pressure Switch Automatic Pressure Controller Black

  • ...pressure gauge has a clear surface and accurate reading, it can provide accurate readings in the range of 1 to 100 psi and 0 to 7 bar for pumps, it is equipped with a 2 inch dial, is a practical tool for detecting water pressure.
  • Reliable material: this pump pressure gauge and 1/4 inch NPT internal thread x 1/2 inch external thread joint are made of brass, not easy to wear, comfortable texture, durable, the surface of this gauge is made of plastic which allows you to see clearly to the reading and pressure range, and use the tape when installing the pressure gauge to prevent leakage.
  • Brass fitting size: NPT thread size is the correct size and does not represent the actual diameter, 1/4 inch NPT internal thread x 1/2 inch external thread brass fitting can be applied to connect the pressure gauge, it is ideal to use the tape to make installation more stable.
  • Applicable occasions: this pump pressure gauge, brass fitting and tapes can be applied for brass, steel and hoses, suitable for swimming pool filters, swimming pool equipment, spas and any other water systems, practical and useful to use.
Check Stock

1 TU58 Thread Measuring Gauge, Vertical Bolt and Nut Gauge / Thread Checker (Inch & Metric)

  • 【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
  • Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
  • 【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
  • 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
  • 【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
  • 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
Check Stock

CARTMAN 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

  • Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts. Features: Internal and External Three Leg and Two Leg jaw puller yokes.
  • 5lb. Slide Hammer, 425mm long, M16*1.5mm UNF thread.
  • Front Hub puller, Rear Axle puller, Locknut Cone.
  • Dent puller screws (large and small), Supplied in blow mold storage case..
  • Features: Internal and External Three Leg and Two Leg jaw puller yokes..
Check Stock

60 PCS Tap and Die Set Metric and Standard Sizes Included Tap Die Kit Metric and SAE for Threading and Rethreading Internal and External Threads

  • SAE & METRIC TAP & DIE SET: These 54 Orion Motor Tech taps and dies cut and clean internal and external threads in common conventional and metric sizes.
  • the set also includes adjustable tap and die wrenches, a T-handle tap wrench, a 1/8" flathead screwdriver, and a thread pitch gauge to cover all your needs.
  • USER-FRIENDLY DESIGN: Our standard and metric tap die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 5-10mm long to allow easier use with the provided wrenches.
  • WIDE APPLICATION: These threading tools work perfectly to correct or create internal and external threading through wood, copper, aluminum, iron, carbon steel, and more!.
  • CHROMIUM STEEL: The thread repair set is constructed with GCr15 bearing steel heat treated for durable and corrosion-free performance with satisfying longevity.
  • BLOW-MOLDED CASE: The blow-molded case stores and organizes the tools, providing easy portability wherever you need them to thread and rethread internal and external threads.
Check Stock

All Brass Faucet Diverter Valve with Aerator, Sink to Garden Hose Diverter Faucet Adapter, for Bathroom/Kitchen Sink Faucet Connection Portable Washing Machine/Dishwasher (G1/2 * 3/4", Chrome)

  • [All Metal] The faucet divider is made of solid solid brass metal material, bright and high-quality chrome plating, can withstand daily rust, corrosion and rust..
  • [Three-way faucet diverter] The faucet diverter has an aerator and an external thread adapter. It can be connected to most bathroom faucets and kitchen faucets through a detachable aerator. The metal handle rotates smoothly and can deliver water to the side outlet..
  • [Conventional type]-The diverter has 55 / 64-27 female threads, including(male thread adapter) 55 / 64-27 male threads (bottom) and 15 / 16-27 male threads (top), please confirm this thread before ordering..
  • [Double external thread] The thread of the diverter is G1/2, which is the standard configuration of the conventional shower hose, equipped with 3/4" GHT standard garden hose connector, which can be connected to the countertop dishwasher, washing machine, aquarium Box etc..
  • [Easy installation] It only takes a few minutes to complete the installation, the perfect solution to connect the faucet adapter of a portable machine..
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ...ely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
  • ➤[Tap and Die Sizes]: Coarse Thread (NC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • Fine Thread (NF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
Check Stock

Qmcandy 2pcs 5/8 in Stainless Steel White Opal Screw Ear Plugs Gauges Piering

  • INCLUDED: 1pair Stainless Steel with White Opal Ear Tunnels,Which Have Three Styles to be Chosen,there are Style A :External thread with white large opal and much littler small zircons& Style B :External thread White Mother of Pearl&Style C :External thread snowflake with Regular hexagon white opal and little zircons around..
  • Gauge: Style A:2g(6mm),0g(8mm),00g(10mm),1/2"(12mm),9/16"(14mm),5/8"(16mm),11/16"(18mm),3/4"(20mm),7/8"(22mm),1"(25mm).
  • Style B:0g(8mm),00g(10mm),1/2"(12mm),9/16"(14mm),5/8"(16mm),11/16"(18mm),3/4"(20mm),7/8"(22mm),1"(25mm).
  • Style C:2g(6mm),0g(8mm),00g(10mm),1/2"(12mm),9/16"(14mm),5/8"(16mm)..
  • The Strongest MaterialHigh Quality Stainless Steel ,very wear resistant,Pls Place it alone and don't collide with other jewelries and they will keep the shine of metal after a long time, pls Sterilize the tunnels with common alcohol occasionally, so that protect you from allergic reaction.Warm Tip: Please don't wear it when sleeping. The material is very hard, which will affect sleep quality..
  • 100% New Condition & Good Quality & Attractive Appearance.Screw Fit Design for Easy Insertion and Removal.Sterilize the tunnels with common alcohol occasionally, so that protect you from allergic reaction..
  • Any problem,pls contact us directly,our goal is t....
Check Stock

Thread Gauge - Inch & Metric Sizes - Nuts, Bolts & Screws Measuring & Identification Tool

  • Package includes: 1 x thread pitch gauge set.
  • Widely used to measure thread and external thread tooth pitch.
  • Using rotary switch, can be freely adjusted.
Check Stock

M10-1.5 Serrated Flange Hex Lock Nuts, 304 Stainless Steel 18-8, Bright Finish, Full Thread, Pack of 10

  • Nut Type: Metric Serrated Flange Hexagon Nuts 10 PCS External Hex Drive Size: 15mm.
  • Thread Coverage: Full Thread Coarse Thread UNC.
  • Diameter of the washer head: 21.8mm (max).
  • Made of 304 stainless steel 18-8 (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
  • Serrations help grip the material surface for easy installation and provide mild vibration resistance..
Check Stock

2 Pack Screw Pitch Cutting Gauge, 51 Pcs America SAE Type Screw Thread Pitch Gauge and 58 Pcs Metric&Inch &America SAE Type Caliper Gages Measuring Tool

  • 【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
  • Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
  • 【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
  • 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
  • 【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
  • 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
Check Stock

uxcell Screw Thread Pitch Cutting Gauge Tool Metric 60 Degree 0.5-7.0mm Stainless Steel

  • Application: The thread measuring gage is applied to measure thread and external thread tooth pitch. A great choice for you.
  • Advantages: The thread pitch gage, through quenching processing, strong hardness, head with a magnetic.
  • Practical: Using rotary switch can be freely adjusted. Bring you a new and different using feeling..
  • Easy to use: Light and delicate, with precise measurements and simple design, which can be widely used. Meet your different needs.
  • High-quality: The thread measuring gage is useful for checking tool angle while cutting threads in metal turning lathes. Its quality is guaranteed.
Check Stock

40 Piece Tap and Die Set,SAE Inch Sizes, Essential Threading Tool with Complete Accessories and Storage Case, for Cutting External and Internal Threads, SAE Thread Types: NC, NF, NPT, by NAKAO

  • ...ely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
  • ➤[Tap and Die Sizes]: Coarse Thread (NC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • Fine Thread (NF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
Check Stock