Top Face And Radius Bits

Micro 100 FR-062-12 Grooving Tool, 1/16\ Width.100\ Proj, 3/8\ Min Bore Dia, 3/4\ Max Bore Depth, 3/16\ Offset, 3/8\ Shank Dia, 2-1/2\ OAL, Uncoated

  • Designed for generating full radius grooves.
  • Polished split face for improved edge retention and chip evacuation while reducing galling.
  • Lockdown flat automatically locates tool on center.
  • AlTiN coated option provides added lubricity and increased wear resistance in difficult to machine materials.
Check Stock

Micro 100 UP-25030-16 Grooving Tool - Undercut.030\ Width.060\ Proj.094\ Angled Proj.240\ Min Bore Dia, 1\ Max Bore Depth.115\ Offset, 1/4\ Shank Dia, 2-1/2\ OAL, Uncoated

  • Designed for plunging full radius undercut grooves and profiling.
  • Polished split face for improved edge retention and chip evacuation while reducing galling.
  • Lockdown flat automatically locates tool on center.
  • AlTiN coated option provides added lubricity and increased wear resistance in difficult to machine materials.
Check Stock

Micro 100 UP-50062-24 Grooving Tool - Undercut, 1/16\ Width, 1/8\ Proj.195\ Angled Proj.490\ Min Bore Dia, 1-1/2\ Max Bore Depth.240\ Offset, 1/2\ Shank Dia, 3\ OAL, Uncoated

  • Designed for plunging full radius undercut grooves and profiling.
  • Polished split face for improved edge retention and chip evacuation while reducing galling.
  • Lockdown flat automatically locates tool on center.
  • AlTiN coated option provides added lubricity and increased wear resistance in difficult to machine materials.
Check Stock

International Door Closer FB-1204 DU Manual Flush Bolt for Aluminum Storefront Doors (Dark Bronze) …

  • Positive "U" joint actuator with 5/8" throw.
  • Rod length for 12" Centerline of face installation.
  • Square Nylon Tip with beveled corners fits in 1/2" square hole.
Check Stock

Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..
Check Stock

Flex-Hone Tool CHC5818 Brush Research CH-C Large Chamfer Flex-Hone, Silicon Carbide, 5/8\ Diameter, 180 Grit (Pack of 1)

  • The Flex-Hone for Chamfer Blending has the ability to blend and radius sharp edges and remove microburrs on chamfered holes eliminating stress risers caused by the chamfering operation.
  • Designed to polish and radius the outer corners (the intersection of the chamfer and flange face) as well as the inner corners and hole.
  • Polished and radiused chamfer surfaces have been shown to be very beneficial on critical rotating parts.
  • Suitable for finishing titanium, inconel, super CVM and nickel based stainless steel alloys.
Check Stock

SKIL SRT1039 Benchtop Portable Router Table

  • ABOVE THE TABLE ROUTER LIFT: Gain convenient access to router bits with the Above Table Adjustment provided by the SKIL SRT1039 all-inclusive Router Table.
  • INTEGRATED BIT STORAGE: Protect and store router bits with a double door, quick latch integrated bit case. This integrated bit storage saves you time and provides a central location for easy to lose bits.
  • PRECISION ROUTING: Router tool features a flat laying aluminum miter gauge slot, aluminum mounting plate, router clamp, and two featherboards for durable, accurate routing.
  • LARGE ALUMINUM FENCE: The tall 16-inch aluminum fence measures 24 inches wide and can handle tall stock with ease, while the fence is complete with adjustable MDF face plates and a starter pin and guard for smooth operation with taller work pieces.
  • TWO FEATHERBOARDS: Two easy to use, adjustable router edge guides attach to the fence and router table to provide additional guidance and protection against kickback.
  • ROUTER CLAMP: Allows you to easily access tools attached underneath the table.
Check Stock

HXLPAY Radius Jig Router Templates Corner Routing Templates, ABS+CNC high Hardness Processing Glue, Rounded Corners Bit R5 R10 R15 R20 R25 R30 R35 R40 (1 Set of 4 Packs)

  • [High-quality material]: ABS+CNC High Hardness Processing Glue processing..
  • [Size]: The set includes R5, R10, R15, R20, R25, R30, R35, and R40 type corner radius quick clamps, 8 radius angle options..
  • [Professional woodworking tools]: It is designed with three holes to prevent cutting. This set of tools allows you to trim the edges and corners of the board. We call it Radius Quick-Jig (Corner Jig). Use these to cut the outer radius! Practical and professional woodworking tools can make the work smooth and efficient..
  • [Easy to use]: To use, just select the corner of the template to be copied and place it on the desired corner of the wood. A complete set of professional tools, easy to use, allows you to save time, and is still trying to freely handle corners in your woodworking projects..
  • [Product usage name 1]: corner jig corner radius routing templates corner jig router corner radius jig corner routing templates hxlpay radius jig router templates juice groove jig radius corner jig router radius guide woodworking radius jig router templates radius router templates radius routing template radius template radius template router round corner router templates..
  • [Product usage name 2]: router bit radius router corner jig set router corner jig router corner radi....
Check Stock

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Titan Attachments Skid Steer Auger 2' Hex 3,000 PSI 15-30 GPM Planetary Drive

  • 1530 GPM up to 3,000 PSI machine requirements..
  • Planetary gear drive unit delivers torque and break through power without wearing parts..
  • 2" Hex output spindle is compatible with the most common auger bits..
  • 6", 9", 12", 18", and 24" diameter Auger bits available. 18", 24", and 48" extensions posts available..
  • Drive unit weight: 122 lbs. Max Auger diameter: 24" Requirements: 1530 GPM up to 3,000 PSI Output spindle size: 2" Hex Max hydraulic back pressure: 1,500 PSI Hose length: 64" Couplers: 1/2" Flat Face (male and female).
Check Stock

Ball Nose End Mill Assorted R0.75 Tip 1/8\ Tapered End Mill TiAlN Coated CNC Router Bits Carbide Bit CNC Cutter for Carving Engraving

  • [ Size ] Tip Radius: 0.75mm, Cutting Length: 9/16" (15mm), Shank Diameter: 1/8" (3mm), Full Length: 1 9/16" (40mm), 2 Flutes..
  • [ High Quality ] The end mills are made of top quality imported tungsten steel carbide that is very tough, resists wear and offers high cutting performance..
  • [ TiAIN coated Design ] TiAlN Coated for high hardness and heat resistance enables the tool has long life..
  • [ Applicable Materials ] The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc..
  • [ Package Including ] 1PCS R0.75 Tip Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge..
Check Stock

uxcell 1/4\ Shank T Slot Router Bit 1/8\ Cutting Depth, 2 Flutes Carbide Tipped T Track Router Cutter (Beige, Gray)

  • overall length: 35mm. Tungsten carbide T slot router bit.
  • Applications: Widely used for processing softwoods, hardwoods, chipboard, plywood, and MDF etc. Designed for creating T-slot wall panels and radius edges on the T-slots.
  • Features: Industrial quality T type slot router bit. Carbide Tip with sharp cutting edge, high hardness and long life. Solid hardened steel body with anti-kickback design.
  • How To Use: Use on electric router, carving machine, edge trimmer, CNC and other automatic routers. Shanks of all bits must be inserted in the collet in full length.
  • Warm Tips: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 8-12M/Min.
Check Stock