Top Face Grooving Bars

THINBIT 3 Pack SGI039D5 0.039\ Width 0.100\ Depth, Uncoated Carbide, Sharp Corner, Grooving Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .100" deep. Can also be used for parting stock up to .200"..
  • Uncoated DURA-MAX 5000 carbide grooving insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
Check Stock

THINBIT 3 Pack SGI012D2FR 0.012\ Width 0.036\ Depth, Uncoated Carbide, Full Radius, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .036" deep. Can also be used for parting stock up to .072"..
  • Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..
Check Stock

THINBIT 3 Pack SGI062D2FR 0.062\ Width 0.100\ Depth, Uncoated Carbide, Full Radius, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .100" deep. Can also be used for parting stock up to .200"..
  • Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..
Check Stock

THINBIT 3 Pack SGI029D5E 0.029\ Width 0.087\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel and Stainless Steel Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .087" deep. Can also be used for parting stock up to .174"..
  • TiAlN Coated DURA-MAX 5000 carbide grooving insert for steel, titanium, nickel and stainless steel without interrupted cuts..
Check Stock

OSCARBIDE 3/8\x1/2\ Indexable Lathe Parting Grooving Holder with 10 Pieces GTN-2(QC1402) Carbide Inserts Heavy Duty Nickel Plated QA06R-20J Right -Hand Cut Off Tool

  • Size：Shank Size (B x H): 1/2"X3/8: Overall Length (L):3.5".
  • GTN-2 insert stop assures accuracy of center height and precise depth of cut.
  • Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
  • Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
  • For external parting & grooving, profile/copy turning.
Check Stock

Lathe Grooving Blade, Lathe Turning Inserts CNC Grooving Cutting Tool (MGMN 150-PCD)

  • MULTIPLE USES: lathe Grooving Inserts can meet a variety of cutting requirements, such as cutting aluminum, copper and its cemented carbide, non-ferrous metals and some non-metals..
  • MATERIAL: CNC lathe Grooving Inserts are made of high-quality diamond materials, with high hardness, high impact resistance, high heat resistance, etc. The Grooving Inserts is not easy to break ..
  • SERVICE LIFE: Due to the high wear resistance and durability of lathe Grooving Inserts, its service life is longer than that of grooved inserts made of general materials, and it is more cost-effective..
  • PRODUCT DESIGN: CNC lathe Grooving Inserts adopts a reasonable and professional design, and the size is also very standard, so the product is stable and reliable in the processing process and has good processing performance..
  • QUALITY ASSURANCE: lathe Grooving Inserts are manufactured through strict standard procedures, and the product quality is qualified. If you have any after-sales problems, please contact customer service and we will deal with it in time..
Check Stock

THINBIT 3 Pack LGT062D5RFR 0.062\ Width 0.155\ Depth, Uncoated Carbide, Full Radius, Grooving Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Cuts up to .155" deep. Can be used for parting stock up to .310". Cuts flush to collet face or shoulder of larger diameter..
  • Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles..
  • Uncoated DURA-MAX 5000 carbide grooving insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree..
Check Stock

THINBIT 3 Pack LGT040D2RE 0.040\ Width 0.100\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel Alloys and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Cuts up to .100" deep. Can be used for parting stock up to .200". Cuts flush to collet face or shoulder of larger diameter..
  • Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles..
  • TiAlN Coated DURA-MAX 2000 carbide grooving insert for steel, titanium, nickel alloys and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree..
Check Stock

THINBIT 3 Pack LGT020D2RE 0.020\ Width 0.060\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel Alloys and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Cuts up to .060" deep. Can be used for parting stock up to .120". Cuts flush to collet face or shoulder of larger diameter..
  • Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles..
  • TiAlN Coated DURA-MAX 2000 carbide grooving insert for steel, titanium, nickel alloys and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree..
Check Stock

CDBP GTN-4 (SP400) CNC Grooving Carbide Inserts Steel Fit for SPB426/36 Lathe Grooving Metal Cutting Tools, 10pcs

  • Size, SP400, Width(B): 4.14mm, Radius(R): 0.25mm, Longth(L): 11mm.
  • General material for parting and grooving processing, a nanocomposite coating of a AITiSi base, high temperature stability, good hardness. Small friction coefficient, reduce the adhesion between workpiece and insert cutting edge..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. range, A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

CDBP GTN-2 (SP200) CNC Grooving Carbide Inserts Steel Fit for SPB226/232 Lathe Grooving Cutting Tools, CVD Yellow Coating, 10pcs

  • Size, SP200,Width(B): 2.18mm, Radius(R): 0.2mm, Longth(L): 8.9mm, fit for Korloy grooving holder..
  • CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting.
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

CDBP GTN-4 (SP400) CNC Grooving Carbide Inserts Steel Fit for SPB426/32 Lathe Grooving Cutting Tools, CVD Yellow Coating, 10pcs (BP400-P)

  • Size, SP400,Width(B): 4.14mm, Radius(R): 0.25mm, Longth(L): 11mm, fit for Korloy grooving holder..
  • CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock