Top Fiber Optical Test Equipments

Rsrteng A86 CCTV Tester IP Camera Tester 8MP CVI TVI AHD Camera Tester 7inch TFT Touch Screen IPC Tester Support POE RS485 PTZ Digital Multi-Meter Optical Power-Meter

  • 【A86 IP Camera Tester】A86 7 inch IPS TFT HDMI Tester,Silicone button,Backlight brightness. 1920x1200 high resolution 4K Camera Tester. 7in1 CCTV Tester,added Optical power meter,TDR cable test and Digital multi-meter functions.Support PoE IEEE802.3af, maximum power 25.5W,2.4G and 5G w-i-f-i frequency band, the camera tester tool will make your installation process simple and efficient..
  • 【IP Camera tester 】Max 4K 8MP /H.265/H.264 IP camera test. Support serial connection.
  • Ethernet test 10M/100M/1G Ethernet link detection,Interface dual-port RJ45 Ethernet.Support IP setting,camera discrovring,ueser authentication,image viewing,PTZ control,modification of camera parameter.Compatible with IPC protocol ONVIF, RTSP, RTP,multi-brand IPC test..
  • 【HD Coaxial Camera test】Support Max 8MP TVI/CVI/AHD camera test.PAL/NTSC video test signal,HDMI I/O,Audio input, Baud 150-19200bps, compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic etc..Support Coaxial PTZ control and call OSD menu,Digital zoom,Full screen display..
  • 【Multi-function tester】OPM --- Used to measure absolute optical power or relative loss of optical power through a section of optical fiber.TDR --- Testing the length of network cable (4 pairs),The maximum lengt....
Check Stock

New Upgraded Network Cable Tester with Optical Power Meter VFL, RJ45 Wire Cable Tracer for Telephone, Ethernet, Video, Tone Generator,CAT5 CAT6 Cable Toner Ethernet Cable Tester PoE

  • Anti-interference Network Cable Tester: Adopt advanced digital/analog/POE mode, high sensitivity, less noise interference, easy to accurately locate the target cable, widely used in engineering wiring, network and equipment maintenance.
  • Optical power Meter Test & Port Flashing: Connect the network cable to be tested to the transmitter, the wire tracker will automatically detect the optical fiber frequency and the port indicator will flash on the same screen, which can display the working speed of the port, which is convenient for accurately locating the line and port..
  • Multifunctional Network Cable Tester: There are nine features to meet your needs. Continuity testing, cable scan, port flash, length measurement, POE Power Supply Test, QC testing, optical power meter, VFL function, and NVC function..
  • PoE Testing: PoE testing can check cable mapping polarity and voltage of PoE network switches, withstand 60VDC. Automatically detects and switches between 10M/100M/1000M modes. Includes cable tracking, short circuit test, interruption of circuit test and etc.
Check Stock

MLHpeak GD-60F Leveling Machine Caster with Rubber, Plate Mounted Retractable Workbench Caster, Leveling Feet Wheels, Loading Capacity 250kg/551lbs per Caster, Pack of 4

  • Large capacity : one caster 551l bs, 4 casters 1102 lb.
  • Made of high quality material : carbon steel stamping top plate, non-marking and "no smell" NBR rubber pad, aluminum body, nylon wheel and handle, powder coat High wearability, low noise, can be moved easily and neatly.
  • Retractable and adjustable height is for easy moving and completely stable condition. And the smooth casters with levelers are with high wear-resistance, low noise, and can be moved easily and neatly..
  • Perfect for electronic equipments, test equipments, semiconductor equipments, medical machineries, production equipments, large equipments, communications equipments, computer support and other precise instruments.
  • After installation of appropriate numbers of leveling casters, any piece of equipment or product can be easily moved into position.
Check Stock

SKYSHL Core Alignment 4.3inch Touch Screen FTTH Optical Fiber Fusion Splicer (With 5pairs Electrodes,Fiber Cleaver and Tool Set) Handheld SM MM DS NZDS Fiber Splicing Machine (SS414F)

  • ★Core Alignment Fusion Splicer★--SKYSHL SS414F is a core alignment fiber fusion splicer with advanced image processing technology.
  • in order to ensure high-precision fiber core-to-fiber core alignment and splicing, SS414F adopts high precision CMOS camera, optical system and servo system.
  • and use high-precision CNC machining of optical fiber fixing clips, V-shaped grooves and other metal parts..
  • ★Fast splicing and heating★--The SKYSHL SS414F welding machine uses a powerful high-speed motor and a high-performance CPU, which can achieve a fast splicing time of 6 seconds and a heating time of 13 seconds (fast mode), which greatly improves the work of the engineer Efficiency.
  • SS414F fusion splicer is very suitable for data center, Metro, LAN and FTTx fiber projects..
  • ★4.3-inch touch screen design and durable appearance design★--SS414F optical fiber fusion splicer is equipped with a 4.3-inch TFT touch screen, which is simple and intuitive to operate. The SS414F optical fiber fusion splicer adopts a lightweight and sturdy aluminum alloy shell and an integrated silicone protective cover, which makes it resistant to impact, windproof, waterproof and dustproof, so as to meet the requirements of various harsh environments..
Check Stock

Fiber Visual Fault Locator 30mW 30KM, VFL Fiber Optic Cable Tester Meter, Red Light Pen Tester Adapt LC/FC/SC/ST Interface, Fiber Network Cable Test Kit Fiber Light Source Testers(Aluminum)

  • 【Wide Application】Universal 2.5mm connector designed for LC, ST, SC, FC interferes both in the circle and square shape of different fiber optic cables, test for both single-mode and multi-mode cables. Apply To: Integrated wiring systems and Fiber Optic engineering.
  • CATV Engineering optic network Maintenance.
  • 【Detection Distance】This visual fault locator has a strong light source output power of 30mW, constant output power the strong red light goes 20-30 kilometers far in fiber optic cable, high effective power circuits provide stable power, continuous-wave and pulsed mode..
  • 【Practical Design】Small size and lightweight, pen-type design with pouch make it portable, easy to check fiber faults with visual fault locator, design with a stainless steel head and aluminum body to prevent crash and dust, the case ground design prevents ESD damage efficiently..
Check Stock

Broadband Pre-tensioning T-Piece Bias Tee High Frequency Inductance Amplifier Module for Optical Modulation Drive

  • 【Isolating capacitance】: isolating dc to prevent dc voltage from leaking to subsequent circuits or test instruments.
  • 【Firmly Structure】 consists of high frequency inductors and capacitors with ultra-broadband, near idealization and no resonant point..
  • 【Application】: Broadband amplifier, optical fiber communication, optical modulation drive, other test and measurement applications.
  • 【High frequency inductance】: isolate ac information to prevent high frequency signals from leaking into the power supply system..
  • 【Size】Working frequency: 10MHZ-6GHz--Insertion loss 003c 1.2 dB--Operating Voltage: DC1-50V--Normal working current: 003c 0.5A.
Check Stock

FTTH Fiber Cold Connection Tool Kit 19 in 1 with FC-6S Fiber Cleaver 10KM Visual Fault Locator Optical Power Meter Cable Tester Stripping Tool

  • 10KM aluminum alloy visual fault locator fiber optic cable tester meter for CATV test,Universally connector for test different ST,SC,FC interfaces.
  • Handheld fiber optical power meter FC ,SC cable tester,Wavelength range: 800~1700,Power measurement range: -70~+10.
Check Stock

LC-LC OM3 MMF Duplex Fiber Optic Patch Cable 1-Meter 3.3-ft

  • A MANUFACTURER - 14 years ISO certified manufacturer, assembly SFP transceiver, fiber patch cords, media converter and networking system..
  • HIGH QUALITY MATERIALS - PVC/LSZH fiber cable.
  • RELIABILITY TESTING - 100% insertion loss test.
  • MMF: Insertion loss≤0.3(dB), Return loss≥-30(dB)..
  • STANDARDS COMPLIANT - TIA/EIA 568-C.3 / 604-10 / 492AAAA, IEC60793-2-10 A1b, CE and RoHS..
  • WIDE APPLICATION - works with all brands of multimode SFP transceivers and fiber optic networks..
Check Stock

SFP+10GBASE-T Transceiver Copper RJ45 10Gbe SFP Module Compatible for Cisco SFP-10G-T-S, Meraki MA-SFP-10G-T, MikroTik, Unifi, Netgear, QNAP, Supermicro, Cat6a/ Cat7, 30m

  • ...co Meraki Series), Netgear AXM765, D-L ink DEM-440XT, Mikrotik, Supermicro, and Other Open Switches..
  • [Easy to Use] Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports..
  • [High Quality] All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch..
  • [After-sales Service] 30-day free return, 3-year warranty, lifetime technology support. QSFPTEK is a manufacturer of transceiver. We offer many compatible options. If you are not sure about the compatibility of your device, please feel free to contact us..
Check Stock

RiteAV - Direct Burial/Outdoor LC-LC 2-Strand Fiber Optic Cable - Multimode (50/125) - 75M (246ft)

  • ...tion: 5m(16ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
  • The model of this fiber is a 5m- 16ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
  • This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
  • Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connec....
Check Stock

Fibergaga-1m(3ft) OS2 SC/APC to SC/APC Fiber Patch Cable Single Mode Fiber, Simplex, Length Option: 0.5M(1.6ft)-75M(246ft) 9/125μm Fiber Optic Cable

  • fiber information: 1m(3ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
  • The model of this fiber is a 1m- 3ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
  • This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
  • Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connector, with low signal loss, can be used more safely..
  • We have focused on optical fiber jumpers for 15 years. Each cable is ....
Check Stock

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack，in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

  • ✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
  • ✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
  • ✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
  • ✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
  • ✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..
Check Stock