Top Firmware Development

Hosyond 3Pcs ESP8266 NodeMCU CP2102 ESP-12E Wireless WiFi Module Internet of Things Development Board Compatible with Arduino IDE/Micropython

  • Not only it is easy to program for this controller by using the CP2102-USB interface,but also unnecessary to press the flash and reset buttons before each flash operation..
  • NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • The ESP8266 has powerful on-board processing and storage capabilities, and can be integrated with sensors and other application-specific devices through its GPIOs..
  • It is compatible with Arduino IDE,works great with the latest Mongoose IoT/Micropython..
  • Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
Check Stock

DORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module, Wireless Transmission Serial Transceiver Receiver

  • ESP8266 ESP-12E WiFi serial module built-board PCB antenna, 4M bytes Flash.
  • Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)..
  • The ESP8266 test board code burner flash downloader compatible with ESP-01 ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ESP-F. Micro USB interface, this module is very easy to program..
  • ESP8266 code burner firmware downloader all IO ports have been drawn out and can be used as ZUI small system development board or small batch burning fixture. The board supports one-click firmware download function, and add burning..
  • Easy to use: ESP8266-12E is a combined products,it's very convenient to operate(Need to solder 3V regulator by youself )..
  • ESP8266-12E is an enhanced version ESP8266-12, improving the external circuit, enhanced impedance signal output is better, whether it is stable or anti-jamming capability , have been greatly improved..
Check Stock

AITRIP 10PCS ESP8266 NodeMCU LUA CH340 ESP-12E WiFi Internet Development Board 4M Flash Serial Wireless Module for Arduino IDE/Micropython

  • ESP8266 CH340 CH340G NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
  • Built-in Micro-USB, with flash and reset switches, easy to program.
  • Compatible with Arduino IDE/Mongoose IoT/Micropython.
  • ESP8266 CH340 chip, power your development in the fastest way combinating with NodeMcu Firmware.
  • It's a IOT unit with all available resources on board, support smart link and smart networking..
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area..
Check Stock

Dorhea 10PCS ESP8266 WiFi Development Internet Board NodeMCU LUA 4M Flash Serial Wireless Module CH340 Serial WiFi WLAN Communication Compatible with Ardui no IDE/Micropython

  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime..
  • ESP8266 CH340 chip, power your development in the fastest way combinating with NodeMcu Firmware.
  • It's a IOT unit with all available resources on board, support smart link and smart networking..
  • Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area..
  • Smart hardwares easily, if you want to do some remote control projects, the cheap but useful NodeMCU board can help you. the embedded MCU and wifi functions let us be able to remotely control our hardwares..
  • DIY a smart car: If together with the motor or servo extension board, one can diy a smart robot, e.g., rc car, tank chassis..
Check Stock

KINGPRINT New Smoothieware Controller Board SKR V1.1 32bit Controller Panel Board for 3D Printer

  • Maximize performance with ARM-class Cortex-M3 series LPC1768 master chip with 32-bit clock speed of 100M.
  • Equipped with highly modular open source firmware Smoothieware, Also supports Marlin 2.0,user-friendly DIY and secondary development, eliminating the worries of not being able to master the core code.
  • Dedicated power chip for 12-24V power input,Use configuration file to set the driving current mode, avoid manual adjustment of current and lead to burnout drive, convenient, safe and reliable.
  • Support 2.8-inch, 3.2-inch,3.5-inch color touch screen, LCD12864 screen.
  • Supports TMC2208, TMC2130, LV8729, DRV8825,.
  • If you have any questions, please do not hesitate to contact us..
Check Stock

Ricoh GR III Street Edition Metallic Gray Digital Camera (International Model)

  • GR street edition: Limited edition designed metallic gray body and a bright yellow ring cap, which is inspired by the street and symbolizes the individuality of the street photographer..
  • High image quality equipped with a GR lens with high resolution, high contrast, and high optical performance. By making the lens optical system thinner, it is possible to implement an in-body image stabilization mechanism..
  • Quick Shooting: High-speed startup of about 0.8 seconds after the power is turned on allows the photographer quick response to changing scenes. The high-speed hybrid AF that achieves both high-speed autofocus and high accuracy in image capture.
  • Portability the small, compact body provides the photographer maximum portability, while improving operability allows for the ultimate snap shooter.".
  • Evolving future firmware development allows the camera to evolve over time with feature additions and improvements..
Check Stock

MakerFocus WiFi Test Tool ESP8266 WiFi Deauther Watch V3 DSTIKE NodeMCU ESP8266 Programmable Development Board & ESP8266 WiFi Module ESP8266 WiFi Deauth Detector V3 (Pre-flashed) with Buzzer RGB LED

  • Product operation link, available in the product guide and documentation.It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient.
  • Wifi Testing Tool: This esp8266 dev board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 only supports 2.4GHz.
  • Extension Board: You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operate Long Working Time: Built-in an 800mAh lithium battery, working time up to 8-10 hours.
  • Please get the documentation from the Product guides and documents below: It will tell you What is wifi deauthentication attack, USB attack firmware, the way to RGB LED Test: You have to install Adafuit RGB LED library first. and CP2102 Driver Download link.
  • It is a device which could detect a WiFi deauthentication attack.It is also an ESP8266 starter kit, you can use it learn esp8266. You can start from how to control the highlight LED or RGB LED..
Check Stock

DIYmall ESP8266 Firmware Downloader Flash Download Tool Test Board Code Burner for ESP8266 ESP-01S/01 ESP-07/07S ESP-12E/12F/12S/F

  • Compatible with ESP-01 ESP-01S ESP-12F ESP-F ESP-S ESP-12S ESP-12E ESP-C3F ESP-C2.
  • Video tutorial link: https://youtu(DOT)be/oLtgUKrG6wM.
  • You need install CP2102 driver first, driver link: https://www(DOT)silabs(DOT)com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers.
  • Espressif flash download tool link: https://www(DOT)espressif(DOT)com/en/support/download/other-tools.
  • The board supports firmware one-click download function and adds programming..
Check Stock

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board

  • Creality new release silent motherboard V4.2.7 ，32bit, compatible with Ender 3..
  • Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware..
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem..
  • Firmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug & play..
  • This silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro/Ender3 v2/ Ender-5, need to flash the Ender 3 Pro/Ender 3 v2/Ender5 firmware..
Check Stock

Creality CR-10 Smart Motherboard CR-10 Smart 3D Printer 32-bit Silent Mainboard with TMC2208+A4988 Stepper Driver V1.2 Silent Mother Board for CR-10 Smart

  • The main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance is greatly improved..
  • Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to avoid the worry of not....
  • Motor driver support :TMC5160,TMC2208,TMC2130,ST820,LV8729, DRV8825,A4988, etc.Display screen support: BIGTREETECH- 2.8 inch TFT,BIGTREETECH-3.5 inch....
  • Support Serial WIFI Online Printing. 6 motor drives, 3 extruders, 3 CNC fans. Reserve extended ports of BL Touch, PWM, ADC, UART, I2C and SPI.
Check Stock

BIGTREETECH SKR PRO V1.2 3D Printer Control Board 32-bit CPU Mother Board Support TMC2208 Stepper Motor Driver TFT35 Touch Screen for 3D Printer Part

  • √1.【SKR PRO V1.2】：Aiming at some problems existing in 3D printed motherboards in the market. Bigtree Technology Co., Ltd. launched a high....
  • √2. 【Main Chip】:The main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance....
  • √3.【Easy to Use】:Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to....
  • √4.【Display】:BIGTREETECH-2.8-inchTFT, and BIGTREETECH-3.5-inchTFT color touch screens are compatible, as are LCD2004 and LCD12864 screens.
  • √5.【Dual Z】: Support for dual Z axis printers (series dual Z).
Check Stock

Hasbro Family Game Night 4: The Game Show Edition (PS3)

  • Plug and play. Multi-console support: Compatible with PS3/PS4/PC.
  • No timeout issue: No annoying 8-minute timeout issue on PS4. Turbo function support.
  • Upgrade firmware via USB. SOCD cleaner support.
  • PS4 controller touchpad click emulation: LS, RS, DP Emulate.
  • XInput support. NOTE: NOTE: PS4 firmware update to 3.11 disables the Brook Super Converter after 8 minutes. Brook has developed a firmware update to address this. Please make certain to update your device firmware before using..
Check Stock