Top Fitting Pipe Plastic

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

Toolazy Ebb & Flow Fitting Kit，Ebb and Flow Fitting Complete Kit Combo Set with 2 Extensions

  • HIGH QUALITY PLASTIC ： Each kit is made from 100% black virgin plastic and is BPA free。.
  • TIDAL IRRIGATION SYSTEM ： Can be used for hydroponics, Tidal irrigation, Aeroponic, aquaponics, flood and drain and drip irrigation systems。.
  • PACKAG KIT ： Ebb & Flow Kit Fill & Drain Fitting comes sealed in a bag，1/2" Tub outlet fitting(1 piece), 3/4" Tub outlet fitting(1 piece), Screen fitting(2 piece) and outlet extension fitting(3 piece)。.
  • EXCELLENT QUALITY ： Filling/draining kits made with the highest quality materials and craftsmanship, strict quality control to ensure tight fit。.
  • INCREASED VERSATILITY ： Thread PVC pipe fittings into bulkhead fittings，Used in homemade tidal irrigation systems。.
Check Stock

Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Vent Systems 4\ inch Elbow 90 degree Duct Pipe Connector Flexible Round Tube Ventilation Hose ABS Plastic 100 mm

  • Made of High Quality ABS Plastic and perfectly designed for home improvement, DIY and Trade.
  • Flexible Coupling, Male Fitting for a 4 Inch pipe - Compatible with Round Pipe, Flexible Hose and other pipe, 90 degree elbow.
  • Easy to install - fit perfectly with any other pipe, vent and connector. Push-fit duct and fittings together..
  • Elastic 90 degree Elbow Ducting Pipe Connector is simple to adjust and connect with pipe..
  • Vent Systems products are made to be used for home improvement, office improvement. They are portable, high quality and long durability..
Check Stock

Class A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP

  • 25 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS 33.5” Longest Length (not including fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID V....
Check Stock

Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP

  • 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Check Stock

Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP

  • 20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5....
Check Stock

Eastman 1 Inch IPS Pipe Repair Clamp, 3 Inch Length, Stainless Steel, 45185

  • PIPE REPAIR CLAMP: Pipe repair clamp tool is designed for use on steel, copper, and plastic pipes, and is perfect for providing repairs to the pipes which suffered puncture, pinhole, or split.
  • creates a positive seal that won't collapse on Schedule 40 PVC.
  • DURABLE: Pipe clamps are crafted from strong and sturdy 301 stainless steel for long-lasting reliability.
  • WHAT IS INCLUDED: Metal pipe clamp is equipped with a high quality rubber gasket that will not deteriorate, and includes galvanized iron lugs which protect against rust and corrosion.
  • SPECS: Pipe fitting clamp features a 1 Inch IPS connection, and can withstand temperatures of 20 degrees F to 180 degrees F.
  • PREFERRED BY THE PRO: Our tools and plumbing supplies are perfect for both home owners and professional contractors.
Check Stock

letsFix PVC Elbow Fittings 1 1/4 Inch, 3-Way/4-Way/5-Way PVC Connectors for SCH40 1 1/4 Inch PVC Pipe - Build Heavy Duty PVC Furniture and Plumbing Projects Available, White [Pack of 4]

  • 【Premium Quality】Made of high quality plastic material, the fitting is able to withstand impact, not easy to crack or break..
  • 【PVC Fitting Size】This 5-Way PVC pipe fitting size is schedule 1 inch socket ,it's Ideal for Center Connections..
  • 【Widely Use】This PVC Pipe adapter is use for agricultural irrigation, soilless cultivation systems, furniture, shelves, pool products, DIY shelves products, spa, potable water, and chilled water applications..
  • 【Easy to Install】PVC is lightweight, easy to install, requires no special tools for cutting and is installed by solvent cementing..
  • 【100% Promise】Replacement or full refund can be provided if you are not satisfied with our 5 way PVC fitting..
Check Stock

FORMUFIT Furniture Grade PVC Pipe, 40", 1/2" Size, Black (3-Pack)

  • FURNITURE GRADE PVC PIPE – Made from ultra-strong, UV-resistant premium furniture grade PVC material. This is an engineered plastic that is designed for outdoor use, weatherability, and can be used in direct sunlight without becoming brittle or shattering..
  • SOLID, BEAUTIFUL PIPE – Monolithic, solid-wall pipe has the same color inside and out. Unmarked, glossy surface finish gives a clean, professional appearance that makes projects look incredibly professional and properly finished..
  • UV RESISTANT – Infused with UV inhibitors to allow the pipe to be used in the sun. Will not crack, change color or degrade over time like plumbing-grade PVC pipe..
  • CONNECT EASILY: Join by solvent welding (standard clear PVC cement) or by press-to-fit. Can also be used with screws between where the pipe and fitting meet to make removable and reusable connections..
  • PRODUCT SPECIFICATIONS: Fits 1/2” Size PVC fittings. Pipe has an actual outside diameter of 0. 840 in. (13/16 in. ). Average Inside Diameter: 0. 622 in. . Minimum wall thickness: 0. 109 in..
Check Stock

APDTY 156632 Heater Hose Heater Outlet Hose With Hose Clamps & Fitttings

  • Complete Pre-Assembled Heater Hose & Pipe Assembly.
  • Rubber Hose Ends, Aluminum Pipe, Plastic Fitting, & Hose Clamps Pre-Installed.
  • Mounts Under The Hood, Back By Firewall, Opposite From The Glovebox.
  • Match Vehicle To Compatibility Chart To Ensure Exact Fitment.
Check Stock

Class A Customs | T-1300-SP | One (1) Spouted 13 Gallon RV Fresh and Gray Water Holding Tank RV Concession

  • ...PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • TANK BUILT-IN FITTINGS: (ONE) 1.25" Outer Diameter x 2" Long Boss Fitting (Smooth Pipe / Spout) fitting is open and glue does not stick to pipe, hose with clamp needed (THREE) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock