Top Flat Concrete Screws

Makita 5 Piece - SDS-Plus Drill Bit Set For SDS+ Rotary Hammers - Aggressive Drilling For Concrete & Masonry - Carbide Tipped Bits

  • DIMENSION: 3/16-inch cutting diameter, 3-1/2-inch flute length, 5-1/2-Inch overall length.
  • HIGH QUALITY CARBIDE TIPPED HEAD: for repeated use.
  • HALF FLAT SHANK: helps prevent bit slippage and fits all drill adapters.
  • APPLICATION: for drilling pilot hole in concrete, block and brick, then installing 1/4-inch concrete screws.
  • INCLUDE: 6 pieces of 3/16-inch masonry drill bits with case.
Check Stock

Concrete Anchors and Screws Kit, 100Pcs Masonry Anchors and 100Pcs Masonry Screws with 1Pcs Corresponding Bit, Blue Conical Anchors and Self Tapping Screws for Stucco Concrete Masonry Brick Wall

  • Premium materials: All the concrete anchors and screws are made of durable materials,The concrete screws are made of carbon steel and galvanized, Will not rust or corrode. and the thick PE material anchor is not easily worn and aged.
  • Tips Of Installation: The masonry anchors and screws kit come with a drill bit, The size of this bit is not applicable to this screw. You can use a bit 2mm smaller than our bit to drill holes. Because the bits do not match, our price does not include the cost of the bit, but the quality of this bit is very good. (we accidentally prepared a mismatched size in this set of products, so it is used as an additional gift, but you can choose a smaller bit to drill holes by comparing this size.).
  • Commonly used size: The #10 concrete screws is 35mm long, the concrete anchors is 36mm,it's not too long and not too short,It's suitable for you mount stuffs such as doorbells, curtain rails, pictures, mirrors, photo frames and lanterns on brick walls, concrete walls, drywalls, wooden walls and more.
  • Well Packed: The wall anchors and screws kit are well organized by a exquisite plastic gird box,very space-saving,and very convenient for you to use and save the screws and anchors..
  • Package Content: 100pcs screws,100Pcs screw anchors,1 Drill B....
Check Stock

JINHAN 4x4 Wood Fence Post Base Brackets | Heavy Duty Powder-Coated 13-Gauge Steel Anchor Support, Come with Screws and Concrete Anchors (4 Pack)

  • ▶ Strong and Sturdy --- Made from 13 gauge steel, black powder-coat for rust-resistant and sturdy enough to support the bottom of your post.
  • ▶ Easy to Install --- Use for 4x4 wood posts(actual 3.5"x 3.5" dry post on market) on existing concrete with 1/2-Inch diameter anchors, wood post are NOT included.
  • ▶ Multifunctional --- Perfect for deck supports, porch railing, handrails and post holders. Also, can be used as table leg/mailbox post support brackets.
  • ▶ Screws & Anchors Supplied --- 16pcs expansion anchors (for concrete floor) and 32pcs flat head self-tapping screws (for 4x4 post securing) have been included in this 4 PACK post bases.
  • ▶ Note --- Post bases do not provide adequate resistance to prevent rotation about the base and therefore are not recommended for non-top-supported installations such as fences or unbraced carports.
Check Stock

Sabre Tools 3/16 Inch x 5-1/2 Inch Masonry Drill Bit, 10-Pack Concrete Drill Bit, Carbide Tipped for Concrete, Brick, Stone, Half Flat Shank, Impact Performance (3/16\ x 5.5\

  • 3/16” x 4” x 6" Masonry hammer drill bits 10 pack set – Ideal for use with Tapcon concrete screws.
  • Half Flat Shank Masonry Bit Set – Can be used with impact drivers and regular screw guns for added non-slip ability.
  • High quality masonry drill bits designed to work in.
  • Bit features double flute with self-centering carbide tip, ensuring fast cut speeds and MAXIMUM life.
  • Our concrete drill bits have an optimized design, allowing material to quickly move out of the hole while bit remains cool.
Check Stock

230 Pieces Plastic Drywall Wall Anchors and Screws Kit, Includes 5 Different Size Plastic Drywall Anchors and Flat Head Screws

  • ...PRACTICAL & DURABLE】Our wall anchors with screws kit are very practical to screw a wide range of different objects and surfaces into one another, durability and stability that ensuring they won’t come apart easily or start to wear down from heavier weights..
  • 【WIDELY APPLICABLE】You can use it on brick walls, concrete walls, dry walls and wooden walls for hanging mirror, curtain rail, decorative pictures, photo frames, towel rack and lightings etc. Thanks to its reliable quality and durability, you can use it to secure your hanging objects with confidence..
  • 【STORAGE EASILY】All clearly assorted in a compact organizer box, allowing you to access the one you need easily by a glance. No time will be wasted looking for screws with anchors of the right size, making your projects swifter and more professional..
  • 【VARIOUS SIZES】Our 230 pieces plastic drywall wall anchors and screws kit contains 5 sizes, you will receive 115 plastic drywall anchors and 115 flat head screws. Most useful household sizes meet most useful repair needs. We have good after-sales service, you can buy with confidence..
Check Stock

MOUNTUP Universal TV Mounting Hardware Kit Fits Most LED LCD OLED 4K TVs, Includes M4 M5 M6 M8 TV Screws, Spacers, Washers and Concrete Wall Anchors for TV/Monitor Mounting up to 80 inches, MU0041

  • One Pack Includes all you need – Our TV hardware comes with each part you need to attach your TV to the tv wall mount. The kit set contains M4, M5, M6, and M8 TV screws, washers, spacers, and concrete wall anchors for most TV/monitor mounting..
  • Compatible with most types and brands TV – Our TV mount hardware fits most TV brands such as Samsung, VIZIO, TCL, Sony, LG, Toshiba, Shar, and more. Plastic anchor bolts suitable for concrete/brick wall installation. The pack includes different combinations of screws, washers, and spacers that work for most flat or curved TV mounting..
  • Durable and Stable – Our TV mount hardware kit is of high quality. Made of sturdy steel, the screws passed strict quality tested before selling and can help prevent stripping and last longer. Worth your trust in sturdily holding your TV on the tv wall mount/ tv stand..
  • Pre-divided and Labeled – Each part of the TV hardware kit is individually packaged and clearly labeled with name and size that help you easily select the exact item you need. Extra screws can be thrown into your toolbox for any other project..
  • Friendly Customer Service: Our customer service team is glad to provide support on pre-purchase or installation problems for customers at any time..
Check Stock

Fasteners Plus 3/16\ x 1-3/4\ Star Drive T-25 Flat Head Blue Concrete Screws (Box of 100) to Anchor Masonry, Brick & Block

  • [DIMENSIONS] Thread Diameter: 3/16" | Length: 1-3/4" | Quantity: 100 Pieces | Material: Blue Ruspert coated Carbon Steel Star Drive T-25 Flat Head.
  • [BIT INCLUDED] Appropriate size drill bit for accurate installation.
  • [CORROSION RESISTANT] Blue Ruspert coated and approved for ACQ lumber.
  • [APPLICATION] Conquest concrete screws are perfect choice for hanging cabinets, attaching furring strips and hanging a variety of fixtures to concrete, brick, block, and other masonry materials.
  • [DESIGN] Hi-Low twin thread design provides easier driving and increases installation speed. Diamond tip for superior penetration into hard materials.
Check Stock

Wall Mount Flat Back Gate Hinges, 2 Pack Outdoor Chain Link Fence Gate Hinges, Heavy Duty Stainless Steel Wall Plate Hinges, Wood Fence Link Gate Hinges, with 5/8 Hinge Pin (Screws Not Included)

  • 【Premium quality】The wall mount gate hinges are made of Extra Thick Stainless Steel, Superior industrial grade products, It's stronger than galvanized steel, provide long lasting great appearance, rust proof, long life..
  • 【Elaborate design】The wall mount gate hinges for starting or ending your fence against a flat vertical surface, The 5/8" male pin will let you use in conjunction with a 5/8" female Frame Hinge, The perfect flat back size fits most gates..
  • 【Package includes】2 pack Wall Mount gate hinges with 5/8" hinge pin, screws length will depend on what you are mounting it on. (Screws not included)..
  • 【Simple installation】2 pre-drilled holes for easy mounting on every surface including walls, wood fence and concrete, Easy to move if not in right place or to move to next location..
  • 【Wide Application】Wall mount gates hinge use on shop, sheds, fences, screen fences, barn doors, flat wood fence, square wood post, or any upright flat surface, etc..
Check Stock

2 Pack Wall Mount Flat Back Gate Hinges, Outdoor Chain Link Fence Gate Hinges, Heavy Duty Stainless Steel Wall Plate Hinges, with 5/8 Hinge Pin, Wood Fence Link Gate Hinges, (Screws Not Included)

  • 【Premium quality】The wall mount gate hinges are made of Extra Thick Stainless Steel, Superior industrial grade products, It's stronger than galvanized steel, provide long lasting great appearance, rust proof, long life..
  • 【Elaborate design】The wall mount gate hinges for starting or ending your fence against a flat vertical surface, The 5/8" male pin will let you use in conjunction with a 5/8" female Frame Hinge, The perfect flat back size fits most gates..
  • 【Wide Application】Wall mount gates hinge use on shop, sheds, fences, screen fences, barn doors, flat wood fence, square wood post, or any upright flat surface, etc..
  • 【Simple installation】2 pre-drilled holes for easy mounting on every surface including walls, wood fence and concrete, Easy to move if not in right place or to move to next location..
  • 【Package includes】2 pack Wall Mount gate hinges with 5/8" hinge pin, screws length will depend on what you are mounting it on. (Screws not included)..
Check Stock

(Qty 1280) Masonry Screws 1/4” x 2-1/4” Blue, Hex Washer Head Concrete Screws Anchor Block or Brick 128 Pack 10/pp (15.99 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 3/16” x 1-3/4” Blue, P/Flat Head Concrete Screws Anchor Block or Brick 64 Pack 20/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 1/4” x 1-3/4” Blue, Hex Washer Head Concrete Screws Anchor Block or Brick 128 Pack 10/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock