Top Forged Component

Diverter Rough in Valve for Delta R11000 3/6 Setting

  • SOLID BRASS CONSTRUCTION: Made from a single piece forged brass body for durability and leak proof reliability..
  • EASY TO INSTALL & TEST: Pressure test cap allows for testing before installation. Can be tested with air (200 psi) or water (300 psi) using supplied test cap.
  • Replaces Delta 6-Setting, 3-porter diverter rough-in valve R11600.-Additional components may be required for installation based on the diverter trim chosen. Specifications: -May require an additional component, Delta RP42410 to completely replace Delta R11600 Valve..
  • AFTERMARKET PART designed to be compatible with Delta trim and cartridges..
  • PEACE OF MIND: This part comes with a lifetime limited warranty. If you are not happy with the product or something goes wrong with the product, you can return it for full refund..
Check Stock

OTC Tools 6981 Blind Hole Puller Set with Storage Case

  • OTC's 6981 Blind Hole Puller Set is a versatile solution for blind or "hidden" bearings in machinery and equipment commonly found on the factory floor....
  • Innovative expanding collets are placed through the bore of part to be removed then expanded with an actuator pin so that the lips of the collet....
  • The unique design of the pin adapter allows the option of using a slide hammer to pop the bearing or bushing from it's seat, or use with a pulling....
  • 5 Collet/Pin combinations: .300 to .350 inch (1.5 inches reach), .350 to .438 inch (1.5 inches reach), .438 - .563 inch (1.75 inches reach), .563 -....
  • Forged and/or machined at OTC's factory in Owatonna, MN.
  • includes easy to read component application chart and instructions.
Check Stock

CURT 45459 Commercial Duty Forged Trailer Hitch Ball Mount 2-1/2-Inch Receiver 20,000 lbs 1-1/4-Inch Hole 6-Inch Drop 4-1/2-Inch Rise

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 20,000 pounds gross trailer weight and 2,700 pounds tongue weight (limited to lowest-rated towing component).
  • HEAVY-DUTY. This forged trailer hitch ball mount comes with a 2-1/2-inch x 2-1/2-inch shank to fit any industry-standard 2-1/2-inch receiver. The ball mount also has a 6-inch drop and 4-1/2-inch rise to promote level towing.
  • READY TO TOW. Hitching up your heavy-duty trailer is easy with this 2-1/2-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this truck ball hitch is protected with a highly durable carbide black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this class 5 hitch ball mount on your truck, simply insert the shank into your vehicle's 2-1/2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

CURT 45456 Commercial Duty Forged Trailer Hitch Ball Mount Fits 2-1/2-Inch Receiver 20,000 lbs 1-1/4-Inch Hole 2-Inch Drop 1/2-Inch Rise

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 20,000 pounds gross trailer weight and 2,700 pounds tongue weight (limited to lowest-rated towing component).
  • HEAVY-DUTY. This forged trailer hitch ball mount comes with a 2-1/2-inch x 2-1/2-inch shank to fit any industry-standard 2-1/2-inch receiver. The ball mount also has a 2-inch drop and 1/2-inch rise to promote level towing.
  • READY TO TOW. Hitching up your heavy-duty trailer is easy with this 2-1/2-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this truck ball hitch is protected with a highly durable carbide black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this class 5 hitch ball mount on your truck, simply insert the shank into your vehicle's 2-1/2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

CURT 45458 Commercial Duty Forged Trailer Hitch Ball Mount, Fits 2-1/2-Inch Receiver, 20,000 lbs, 1-1/4-Inch Hole, 4-Inch Drop, 2-1/2-In Rise

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 20,000 pounds gross trailer weight and 2,700 pounds tongue weight (limited to lowest-rated towing component).
  • HEAVY-DUTY. This forged trailer hitch ball mount comes with a 2-1/2-inch x 2-1/2-inch shank to fit any industry-standard 2-1/2-inch receiver. The ball mount also has a 4-inch drop and 2-1/2-inch rise to promote level towing.
  • READY TO TOW. Hitching up your heavy-duty trailer is easy with this 2-1/2-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this truck ball hitch is protected with a highly durable carbide black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this class 5 hitch ball mount on your truck, simply insert the shank into your vehicle's 2-1/2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

CURT 45430 Industrial Duty Forged Trailer Hitch Ball Mount Fits 3-Inch Receiver 21,000 lbs 1-1/4-Inch Hole 4-Inch Drop 2-Inch Rise CARBIDE BLACK POWDER COAT

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 21,000 pounds gross trailer weight and 2,800 pounds tongue weight (limited to lowest-rated towing component).
  • HEAVY-DUTY. This forged trailer hitch ball mount comes with a 3-inch x 3-inch shank to fit any industry-standard 3-inch receiver. The ball mount also has a 4-inch drop and 2-inch rise to promote level towing.
  • READY TO TOW. Hitching up your heavy-duty trailer is easy with this 3-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this truck ball hitch is protected with a highly durable carbide black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this hitch ball mount on your truck, simply insert the shank into your vehicle's 3-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

uxcell Hydraulic Rebar Cutter Cuts 1/4\ - 7/16\ 4 mm to 12mm Concrete Construction Tool

  • Cutting Capacity: 1/4 inch - 7/16 inch (4-12mm).
  • Maximum Crimping Power: 6 Tons. Select the rebar size that matches the working range..
  • Head and cutters are made of forged steel for an extended operating life. When cutting steel bars, be sure to turn the hydraulic pump switch clockwise to the end, so that the switch is in the "on" state..
  • Metal body with comfortable rubber grips, anti-slip rubber hand guard offers secure grip.
  • Only suitable for cutting steel bars. Widely used in construction, electric power, transportation, petroleum, metallurgy and other fields..
  • Tips: Please read the instructions in the package carefully before use. It is a precision component product, strictly forbidden to impact or disassemble it by yourself..
Check Stock

Amazon Basics Leather Hole Punch Set with case, Heavy Duty Rotary Puncher, Multi Hole Sizes Maker Tool

  • Heavy-duty rotary hole punch and sizing tool for working with leather materials.
  • thickness of the leather must not exceed 4mm.
  • Creates punch hole sizes including 0.1 inch (2.5mm), 0.12 inch (3mm), 0.13 inch (3.5mm), 0.15 inch (4mm), 0.17 inch (4.5mm), and 0.19 inch (5mm).
  • Ideal for leather craft projects or working with felt, cardboard and other materials.
  • great for applying buckles and studs, creating belt holes, working with jewelry and other creative applications.
  • Drop forged, heat treated steel component construction with a chrome finish.
  • Contoured ergonomic handle offers a comfortable, textured grip and easy usability.
Check Stock

Wiha 32981 Insulated Industrial Pliers/Cutters Set, 3-Piece & Klein Tools 11055 Wire Cutter and Wire Stripper, Stranded Wire Cutter, Solid Wire Cutter, Cuts Copper Wire

  • Product 1: Insulated Industrial Pliers & Cutters Set, 3 Piece. Includes: 8.0" Combination Pliers, 8.0" Long Nose Pliers & 8.0" Diagonal Cutters. Drop-forged from special tool steel, industrial brushed finish. Two component ergo cushion grips. 1000Volt rated..
  • Product 2: Cuts, strips, and loops 10-18 AWG Solid and 12-20 AWG Stranded wire and cleanly shears 6-32 and 8-32 shears.
  • Product 2: Precision ground stripping holes.
  • Product 2: Strong-gripping serrated nose for easy bending, shaping, and pulling of wire.
  • Product 2: Holes for looping and bending wire.
Check Stock

CURT 48510 Black Steel Pintle Hitch Lunette Ring 3-Inch ID, 22,000 lbs

  • HEAVY-DUTY TOWING. This lunette ring provides a heavy-duty towing connection between your truck and trailer. It securely couples to a pintle hitch or clevis bar and is commonly used for construction, agriculture and military applications.
  • RELIABLE STRENGTH. For maximum confidence on the job, this lunette ring is rated to tow 22,000 lbs. gross trailer weight (limited to lowest-rated towing component).
  • VERSATILE FIT. This lunette ring hitch features an inside diameter of 3 inches to fit a wide variety of pintle hitch options. It can be coupled to most pintle hooks and ball and pintle hitch combinations (sold separately).
  • SECURE INSTALL. For a solid installation, this pintle hitch lunette ring mounts onto a trailer tongue using 7 bolts (bolts sold separately).
  • TOUGH BUILD. This lunette ring is constructed from solid forged steel alloy for superior strength. It comes with a durable black powder coat finish for long-lasting corrosion resistance.
Check Stock

Prostormer 228-Piece Mechanics Tool Set General Purpose Mixed Sockets and Wrenches Auto Repair Tool Kit with Plastic Storage Case

  • ▶ [High Quality Material] - All the tools are made of high quality steel with chrome vanadium polish, that protects tools against corrosion, forged....
  • ▶ [Muti-purpose Tools Kit] - This Mechanics tool set includes the most useful and essential tools for basic household and auto repairs. It is the....
  • ▶ [Complete Varieties] - 228pcs tool kit contains mixed sizes of SAE and metric combination wrenches, a complete range of 1/4", 3/8" & 1/2" metric....
  • ▶ [Toolbox Included] - Assortment of necessary tools are in one box, durable plastic case with internal molded compartments to keep each component....
  • ▶ [Great Gift Choice] -This tool kit is easy to carry and stock. It is a good gift choice for men and women. Kindly Tip: When opening the toolbox,....
Check Stock

CURT 48600 Raw Steel Pintle Hitch Lunette Ring 3-Inch ID, 12,000 lbs, Channel Mount Required

  • HEAVY-DUTY TOWING. This lunette ring provides a heavy-duty towing connection between your truck and trailer. It securely couples to a pintle hitch or clevis bar and is commonly used for construction, agriculture and military applications.
  • RELIABLE STRENGTH. For maximum confidence on the job, this lunette ring is rated to tow 12,000 lbs. gross trailer weight (limited to lowest-rated towing component).
  • VERSATILE FIT. This lunette ring hitch features an inside diameter of 3 inches to fit a wide variety of pintle hitch options. It can be coupled to most pintle hooks and ball and pintle hitch combinations (sold separately).
  • SECURE INSTALL. This pintle hitch lunette ring is designed to mount onto a CURT lunette ring channel with the bolt kit #48620 (2-inch bolt pattern, sold separately). A channel mount also allows for flexible height adjustment.
  • TOUGH BUILD. This lunette ring is constructed from solid forged steel for superior strength. It comes with a raw steel finish for ready painting as needed.
Check Stock