Top Forged Gear Ring

Keylights Key Blank Specialty Bagged Sc1 Purple Plastic Head, Yellow Light

  • Ring Gear Size: 46 x 14mm/1.8'' x 0.55''(Max.D*T).
  • Pinion Gear Size: 17 x 12mm/0.67'' x 0.47''(Max.D*T).
Check Stock

Fin-Nor LT80 Lethal 80-size Spinning Reel

  • Strong aluminum body and side plate, with forged machined aluminum spool with braid ban.
  • Multi-stack MegaDrag with carbon fiber washers, and forged front drag knob.
  • MegaShield multi-layer corrosion protection, stands-up to the harshest environmental conditions.
  • 7 Double-shielded stainless steel bearings.
  • 4.9:1 gear ratio, 40-lbs of max drag, 330yds/20-lb mono or 275yds/65-lb braid capacity.
Check Stock

SmallRig Rosette Side Handle with Record Start/Stop Remote Trigger for Multiple Selected Cameras- 3324

  • 【STANDARD 0.8 MOD】SmallRig Seamless Focus Gear Ring 3293 is designed to fit lenses for precise and stable focal length adjustment. It features standard 0.8 MOD and allows you to add 0.8 MOD gears to a compatible lens for use with cine follow focuses..
  • 【FITS LENS PERFECTLY】Moderate stiffness, SmallRig Φ72-Φ74 Seamless Focus Gear Ring 3293 fits lens perfectly. This 72mm to 74mm size fits virtually all lenses of the same outer diameter..
  • 【SUPPORT 360° ROTATION】It makes less noise and no distortion, allowing 360º smooth rotation and precise focus adjustment..
  • 【SEAMLESS SWITCHING】The ring is made by elastic material, suits lens seamlessly and evenly. (Please Note: Gear slippage or jam may occur when mounted onto lenses larger than Φ72-Φ74mm across.).
  • 【RELATED ACCESSORIES】The ring 3293 can work with SmallRig Mini Follow Focus 3010 and other follow focus systems, such as Seamless Focus Gear Ring 62.5 to 64.5mm 3291, 66 to 68mm 3292, 75 to 77mm 3294, 78 to 80mm 3295, 81 to 83mm 3296..
Check Stock

Red Hound Auto Qty 20 Flatbed Truck Trailer Cargo Tiedown Weld-On D-Ring 1/2 Inches Anchor Tie Down Point

  • 20 Heavy Duty Premium Forged D-Rings with Weld-On Brackets.
  • Industrial strength forged steel ½” thick D-Ring.
  • Made durable and ready to handle tough environments.
  • D-Ring is approximately 3-1/2” x 3-1/2”.
  • bracket is approximately 1-1/2” x 2” (outside measurements).
  • Great for tarps, boat covers, cars, trucks, trailers and more.
Check Stock

Red Hound Auto Qty 10 Flatbed Truck Trailer Cargo Tiedown Weld-On D-Ring 1/2 Inches Anchor Tie Down Point

  • 10 Heavy Duty Premium Forged D-Rings with Weld-On Brackets.
  • Industrial strength forged steel ½” thick D-Ring.
  • Made durable and ready to handle tough environments.
  • D-Ring is approximately 3-1/2” x 3-1/2”.
  • bracket is approximately 1-1/2” x 2” (outside measurements).
  • Great for tarps, boat covers, cars, trucks, trailers and more.
Check Stock

Dahon

  • 【The DAHON Advantage】DAHON is the undisputed king of folding bikes. Join the family of millions of cyclists powered by our leading technology..
  • 【Adjustable Handle】Equipped with a radius telescope made of forged alloy with fusion technology, the handlebar can be adjusted to give you greater....
  • 【Durable Aluminum Frame】The Mariner D8 folding bike’s frame is constructed from a lightweight Dalloy Sonus tubeset and a lattice forged hinge....
  • 【8-Speed Derailleur & Dahon tires】Dahon rear derailleur gives you the opportunity to cruise or shift in high gear. The bike features a 20-inch....
  • 【Lightweight Folding Bikes】Designed for leisure and daily commuting, this DAHON 20" folding bike has a folded size of 31”x 12” x 25” and....
Check Stock

Dahon

  • 【The DAHON Advantage】DAHON is the undisputed king of folding bikes. Join the family of millions of cyclists powered by our leading technology..
  • 【Adjustable Handle】Equipped with a radius telescope made of forged alloy with fusion technology, the handlebar can be adjusted to give you greater....
  • 【Durable Aluminum Frame】The Mariner D8 folding bike’s frame is constructed from a lightweight Dalloy Sonus tubeset and a lattice forged hinge....
  • 【8-Speed Derailleur & Dahon tires】Dahon rear derailleur gives you the opportunity to cruise or shift in high gear. The bike features a 20-inch....
  • 【Lightweight Folding Bikes】Designed for leisure and daily commuting, this DAHON 20" folding bike has a folded size of 31”x 12” x 25” and....
Check Stock

Forged Sebra Nakiri knife, Vegetable cleaver, 6.9 inch, handmade, in wooden giftbox

  • UNIQUE DESIGN: Forged Sebra knives are real eye-catchers in every kitchen. The hammered blade features a robust design. The handles of Sebra wood (African Dark Wood), with the subtle red ring give these knives their unique look..
  • CONTENTS: This products consists of a 6.9 inch Forged Nakiri/Vegetable cleaver, giftbox and warranty card..
  • WARRANTY: All Forged knives come with a 10-year warranty on production and material defects.
  • MATERIALS: Forged Sebra knives are made from 440C stainless steel. The handles are made from genuine African Dark Wood (Sebra-Wood) with a stainless steel bolster and end-cap. Hardness 58Hrc with an edge of 18 degrees..
  • GIFT READY: Each product is packaged in a wooden box with transparent acrylic lid. The knife is secured with a soft insert. All knives comes with a warranty card. Perfect for every cooking lover..
Check Stock

CURT 45832 D-Ring Shackle Mount Trailer Hitch, Fits 2-Inch Receiver, 13,000 lbs

  • DEPENDABLE STRENGTH. This D-ring ball hitch is constructed from high-strength forged steel and rated for a straight-line pull of up to 13,000 pounds (limited to lowest-rated towing component).
  • VERSATILE USE. This forged trailer hitch ball mount with D-ring comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The shackle features a threaded pin to remove if necessary.
  • READY TO TOW. Recovery towing is easy with this 2-inch shackle mount. It can be used for pulling another vehicle, stumps and other offroad applications.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this D-ring hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

MOFEEZ 3\ 4\ 6\ inch 3-Jaw Gear Puller ¨C Gear Removal Tool for Slide Gears, Pulley, and Flywheel

  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free.
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity.
  • Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach.
Check Stock

PENN Fishing SQL20LWLC Squall LevelWind , Black Gold, 315yd/20Lb

  • Level wind trolling reel for big game fish in a variety of saltwater conditions.
  • Durable construction with lightweight graphite frame and side plates and bronze main gear and stainless pinion gear.
  • HT-100 carbon fiber drag system provides powerful drag without sacrificing smoothness.
  • 2 stainless steel ball bearings and instant anti-reverse bearing that eliminates rotor backplay.
  • Forged and machined aluminum spool is braid ready and has line capacity rings marked at 1/3, 2/3, and full capacity.
  • Graphite frame and side plates keep the reel lightweight.
  • Machined high-strength main gear is marine grade bronze alloy.
  • High strength stainless steel pinion gear for the ideal smoothness.
  • HT-100 drag washers remain cool and smooth in the heat of battle.
  • 2+1 shielded stainless steel bearing system and anti-reverse.
Check Stock

XYJ FULL TANG Camping Knives Set Chinese Butcher Knife Vegetable Chef Knives Slice Boning Knives With Leather Knife Sleeves&Roll Bag&Kitchen Tools

  • ...g strain and fatigue, provides precise cutting control. Additionally, the Comfort Ring Design helps to counteract the forces generated during cutting, ensuring stability. Overall, the XYJ Comfort Ring Design combines comfort, cutting control, and stability for effortless and efficient kitchen cutting experience..
  • 【Forged High Carbon Steel Full Tang Blade】The XYJ knife set features an ergonomic full tang design for improved stability and comfort. The handle is made from premium materials, providing durability and slip resistance for confident handling. The blade is forged using a stonewashed and hammer finish treatment, making it tough, wear-resistant, and non-sticking. Proper care is required for high carbon steel knives to prevent corrosion, but with regular maintenance, these forged knives will maintain their sharpness..
  • 【One Set for All Tasks】This XYJ chef knife set features high carbon steel knives, including 6 various types of meat and vegetable cleaver boning knives, a 8-pockets chef knife bag, honing steel, mini whetstone, mini knife with sheath, and 3 cut-resistant finger gloves. Designed to handle a wide range of kitchen tasks, such as slicing, chopping, dicing, mincing, and cutting through tough vegetables, thick meats, cartilage, fis....
Check Stock