Top Forged Valve With Nickel

Powerbuilt 20 Ton Bottle Jack with 9-11/16 inch to 17-5/8 inch lifting range, portable hydraulic car jack with carrying case- Red 640503

  • forged iron saddle with a lifting range of 9-11/16 in. to 17-5/8 in.
  • Forged steel saddle and cast handle socket for maximum height.
  • Pin style release valve for easy operation, extension screw provides added lift height and meets or exceeds ANSI standards.
  • Made to be the most reliable tools in the market today.
  • Extension screw provides added lift height.
Check Stock

34pcs Tire Valve Stem Tool Installer Kit- 20 Pcs Valve Cores with 8 pcs Alloy dust caps and 5 Pcs Valve Adaptersand a 4-Way Valve Tool

  • ...w threads and rubber o-ring seal design, prevent air leakage and makes it much easier to pump your bikes.Install the Presta to Schrader adapter, simply loosen the tip of the Presta valve and then screw on the valve adaptor, now your Presta valve is a Schrader valve. No need any complex installation..
  • Valve core: The nickel plating enhances the corrosion resistance of the valve core and valve stem, especially when robust steel shaft with a corrosion resistant plating these valve cores is copper nickel-plated valve coresinstalling the valve core into an aluminum valve stem.More durable, safe and reliable..
  • Portable storage box packaging: This tool box is very easy to store and carry, can be placed in any corner of the garage or car, and will not expire and deteriorate..
Check Stock

Universal Integrated Shower Diverter Rough-in Valve Replacement for Delta R22000

  • Forged brass body for durability and leak proof.
  • Application type: For shower only, not recommended use for tub.
  • Can be used with 3 or 6 function Delta diverter trim, all MultiChoice shower trim cartridges.
  • Monitor pressure balance valve keeps water temperature within a safe +/-3Degree F (+/-1.6Degree C), helping to protect you from sudden changes in hot or cold water pressure.
  • One-piece forged valve body without Stops.
Check Stock

Mizuno Pro 223 Golf Iron Set 4- GW, Right Hand, Steel Shaft, Reg Flex

  • Grain Flow Forged HD: One-piece Grain Flow Forged HD from 1025E Pure Select mild carbon steel at Mizuno's iconic facility in Hiroshima, Japan – where Mizuno irons have been produced since 1968..
  • Harmonic Impact Technology: Fine tuned head geometry delivers ideal impact feel and feedback.
  • 1025E Pure Select: Six time tighter tolerance than industry standard for greater purity..
  • Copper Underlay: Thin copper layer beneath a nickel chrome to provide a further enhanced impact feel.
  • Grain Flow Forged Chromoly: Our strongest Forged material with the solid, soft consistent feel of Grain Flow Forged.
Check Stock

OSOF 25Pcs Tyre Valve Stem Puller Tools Set - 10Pcs TR412 Snap-in Valve Stems with 10Pcs Valve Stem Cores, 1Pcs 4-Way Valve Tool, 1Pcs Dual & 1Pcs Single Head Valve Core Remover Installer Tool

  • 【Function】25 In 1 Tyre valve stem puller tools set. For quick removal or installation of tyre valve inserts and repair tire.Works with any wheel that uses a standard 0.453" valve stem.With 10 replaceable Valve stems and multiple wrenches，meet your different needs..
  • 【Material】- Durable plastic handle and robust steel shaft with a corrosion resistant plating these valve cores is copper nickel-plated valve cores .The nickel plating enhances the corrosion resistance of the valve core and valve stem. Rubber TR412 Valve Stem Cores ，more durable, safe and reliable..
  • 【Widely Use】- Suitable for repair of tubeless tires for passenger cars, bicycle,motorcycles, ATVs, electric cars, off-road vehicles and trucks.Fit for all standard valve cores..
  • 【Easy to Use】- Pull out the old valve stems and re-install the new valve stems, No need to worry scratching wheels or destroying valve stems.The tool sets easy to carry and use..
  • 【Package】1 Pcs Long Valve Stem Puller Installer Tool.
  • 10 Pcs TR412 Valve Stems with 10 Pcs Valve Stem Cores.
  • 1Pcs Single Head Valve Core Remover, 1 Pcs Dual Single Head Valve Core Remover ,1 Pcs 4-Way Valve Tool, 1 x Tire Valve Stem Core Tool -- Total 25Pcs/Pack.
Check Stock

Kegco Standard Double Faucet Tower Kegerator Conversion Kit No Tank - STCK2-542-2_NT

  • ...and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DUAL FAUCET DRAFT BEER TOWER: This 3″ diameter air-cooled chrome-plated metal draft beer tower comes complete with two NSF-approved chrome-plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two 5′ lengths of 3/16″ I.D. beer line extend from the bottom of the tower. These thermoplastic vinyl beer hoses remain flexible and durable at recommended temperatures and pressures, are unaffected by normal cleaning compounds, and will not rot, swell, or dry out..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wren....
Check Stock

Valve Core Removal Tool Set,40Pcs Copper nickel-plated Schrader Valve Cores ,20Pcs O-ring Seal Valve Stem Caps, 3 Pieces Dual Single Head Valve Core Remover Tool Tire Repair Tools

  • Package Include : 40Pcs Copper nickel-plated schrader valve cores,20Pcs with rubber-ring Seal valve stem caps,2 x Single Head Valve Core Remover,1 x Dual Head Valve Core Remover Tool.
  • Valve Cores: Manufacture of valve cores is fully automated, and all Schrader valve cores are 100% leak-tested. Our fully automated manufacturing allows us to offer zero-defect products.Use of nickel-plated cores prevent galvanic corrosion..
  • Valve Tools: Handy tool designed to easily tighten or remove valve cores on bicycles, cars, trunks,and any other air filled tires..
  • Valve Caps: Airtight, Leakproof Seal –tire valve caps feature rubber O-rings that create a tighter, more effective seal, so there’s no air leaking on long, tough drives..
  • These schrader valve cores is used in any car, truck, motorcycle, bicycle, ATV,and more..
Check Stock

Kegco Deluxe Tower Kegerator Conversion Kit - No CO2 Tank - DTCK-542_NT

  • ...n top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 12″ SURFACE MOUNT STAINLESS STEEL DRIP TRAY: Designed with style and convenience in mind, this drip tray is constructed from 100% stainless steel and has an attractive brushed finish that will look great on any kegerator. It is dishwasher safe and features a detachable grill for easy cleaning. Because it does not come with a drain, this drip tray is perfect for use where running a drain would be difficult..
  • SINGLE FAUCET STAINLESS STEEL DRAFT BEER TOWER: Popular for outdoor or commercial applications, this top-of-the-line NSF approved 3″ diameter....
Check Stock

Kegco Deluxe Tower Kegerator Conversion Kit w/ 5 lbs Co2 Tank - EBDTCK-542_5T

  • ...n top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • STAINLESS STEEL SINGLE FAUCET DRAFT BEER TOWER: Popular for outdoor or commercial applications, this top-of-the-line NSF approved 3″ diameter draft beer tower has a beautiful polished stainless steel finish and comes complete with a chrome plated brass faucet with solid brass lever. 5′ of 3/16″ clear beer tubing with nozzle and hex nut assembly and a mounting gasket with screws are also included for quick and easy setup..
  • 12″ SURFACE MOUNT STAINLESS STEEL DRIP TRAY: Designed with style and convenience in mind, this drip tray is constructed....
Check Stock

Mizuno Pro 225 Golf Single Long Iron (3 iron), Right Hand, Steel Shaft, Stiff Flex

  • Grain Flow Forged Chromoly: Our strongest Forged material with the solid, soft consistent feel of Grain Flow Forged.
  • Harmonic Impact Technology: Fine tuned head geometry delivers ideal impact feel and feedback.
  • Copper Underlay: Thin copper layer beneath a nickel chrome to provide a further enhanced impact feel.
  • Hybrid Muscle Back: A high performance hollow body hybrid structure is formed by utilizing a Grain Flow Forged Chromoly Face and neck part, fused to multi-material body.
  • Multi-Material Construction: Strategically positioned exotic materials to help optimize launch and forgiveness.
Check Stock

Sharkbite 24623LF Garden Valve, 3/4" x 3/4"

  • The Sharkbite push-to-connect garden valve is compatible with any combination of Copper, pex, CPVC or pe-rt pipes and requires no solder, glue, unions or additional tools to connect.
  • This multi turn valve allows for the regulation of water flow and features a durable forged body for strength.
  • The valve comes with an integrated mounting flange to secure it to the desired mounting surface.
Check Stock

Kegco Deluxe Door Mount Kegerator Conversion Kit with 5 lb. Co2 Tank EBDCK-5T

  • ...n top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6″ x 4″ door mount drip tray’s clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you’re done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not have a drain, so it will need to be emptied manually..
  • HEAVY DUTY FAUCET WRENCH: Make repairs and adjustments ....
Check Stock