Top Four Way Pipe

Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers

  • ...sure From The Top And Bottom Of The Panels During Glue Up. In Fact, With All The Pressure Being Applied On Both Sides, Bar And Pipe Clamps Will Almost Certainly Bow, Buckle Or Rack Your Panel Glue Up Project.
  • Let’S Make Racked Panel Glue Ups A Thing Of The Past. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time.
  • Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock.
  • Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clamp Every 12....
Check Stock

FORMUFIT F034CRX-UV Cross PVC Fitting, Furniture Grade, 3/4\ Size, Clear

  • FOUR DEEP SOCKETS: Connect up to four (4) PVC pipe segments in a cross configuration..
  • WORKS WITH 3/4" SIZE PVC PIPE: Fits 3/4” Size PVC Pipe, which has an outside diameter of 1-1/16" (1. 050”).
  • MADE TO LAST: : UV resistant PVC material resists fluorescent lighting degradation. Lasts for years in indirect sunlight without yellowing, discoloration or cracking.
  • NO MARKS, LOOKS GREAT: Glossy, clean unmarked surfaces for a professional look with tapered ends on each socket end to allow a smooth transition from the pipe to the fitting. Will not snag clothing or pet hair like plumbing grade PVC fittings.
  • COMPLETEMENTS YOUR DESIGN: Maintains the same socket depth, fit, finish and color as all other FORMUFIT products.
  • MADE IN USA: Manufactured in the USA with a 1 year manufacturer.
Check Stock

letsFix PVC Pipe 1/2

  • Professional PVC pipe and PVC fittings global suppliers..
  • Furniture-Grade pvc pipe – The “furniture grade” means that it has better performance than traditional plumbing pipes: ① The surface finish is higher and flawless. ②Processed from raw material particles with higher strength, the load bearing capacity and impact resistance are greatly enhanced. ③ Has better sound insulation performance. ④ There is no mark on the surface of the pipe, so that your project looks more professional. ⑤A wide range of applications, both indoor and outdoor..
  • Size Parameters – Length of each: 40″/ The total length of [10 Pack] is 33.33 Feet/ 1/2″ Schedule 40 PVC PIPE/ O.D.= 0.840″/ Wall= 0.109″/ I.D.= 0.602″..
  • Easy to Install – They usually complete the project with 3 way, 4 way, 5 way and various pvc pipe fittings. You can use them to create a pvc world and use your imagination, any project could be achieved..
  • After-sales Service – we have a mature after-sales service system to replace goods or refund unconditionally..
Check Stock

Industrial Pipe Clothing Rack on Wheels Heavy Duty Garment Racks Rustic Rolling Rack for Home Clothes Display Rack Retail Display-Gold

  • RUSTIC INDUSTRIAL STYLE: Made with strong iron pipe, the garment is heavy duty and durable. Glossy gold painting with rustic industrial looking is....
  • EASY SET UP: Everything comes in a kind of heavy box for you to assemble. There is a tool included for assembly. It is easy to assemble and only take....
  • ENOUGH STORAGE SPACE: The cast iron water pipe is durable and the base is depth of 15.7 inches,more stable.
  • Add extra closet hanging space for clothing....
  • LOCKING WHEELS: Two of the four universal wheels can be locked so that you can fix the racks or push it to go outside for drying clothes. It's not to....
  • WORRY-FREE AFTER SERVICE: We provide worry-free after service. If you have any question or your item arrives damaged in any way , feel free to contact....
Check Stock

(4 Pack) 3/4" Wood Gluing Pipe Clamp Set Heavy Duty PRO Woodworking Cast Iron

  • Four plate clutch for high clamping pressure, quick release.
  • This clamp is limited only by the length of the pipe you supply.
Check Stock

Dr. Watson - Wooden Pipe Stand - Throne - for 1 Tobacco Smoking Pipe, Handmade from Solid Wood

  • This pipe stand is specifically designed for long stem tobacco pipes from 7inch - 14 inchs.
  • Beautifully hand carved Fish shaped pipe stand, Pipe rack.
  • You can rest the pipe in more then one way.
Check Stock

Polypropylene Pipe Fitting, Cross, Schedule 80, 1/2\ NPT Female for CR050

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH Floor Flange of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Floor flange pipe fittings are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Without DIY Difficulty: Home TZH Industrial pipe flange comes with three standard holes allowing you to secure your flange to floors or walls. The floor flange is suitable for all kinds of surface application. Put this up in minutes. You can install the pipe fittings with easy to follow directions. Fix a wooden board with floor flange, than fix the whole bracket to the wall with screws and screw holder..
  • Your Personal DIY Style: The simple and indu....
Check Stock

Milwaukee 48-38-0010 Cutter Wheel 2-Pack Sold as 4 Pack

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw....
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed....
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from....
Check Stock

6Pack PVC Fittings 1-1/2Inch 5 Way, Furniture Grade PVC Elbow Fittings for 1-1/2Inch PVC Pipe, PVC Pipe Fitting Connector for Build PVC Structures Garden Enclosures Dog Agility Jumps Greenhouse

  • PVC Fittings for SCH40 1 1/2 Inch PVC Pipe: The 1-1/2 inch PVC fittings are perfectly suited for 1-1/2" Sch. 40 PVC pipe.
  • The 1-1/2 elbow fittings have an inside diameter of 1-7/8 inches.
  • Please Notes: PVC pipe sizes are named by measuring the inside diameter of the PVC pipe, as 1-1/2" PVC pipe has an inside diameter of 1-1/2" and an outside diameter of 1-7/8".
  • Furniture Grade 5 Way PVC Conner: 5-way PVC elbow is made of furniture grade PVC with solid PVC material thickness, super thick and heavy duty, widely used in indoor and outdoor DIY PVC structures, such as building greenhouse for vegetable garden and making agility equipment for dogs.
  • Professional Grade PVC Pipe Fitting: PVC fittings have a bright white finish and sturdy material that will last for years without yellowing and resist low temperatures and shocks.
  • tapered ends and extra-deep fitting sockets ensure smooth and stable PVC pipe connections.
  • PVC Connectors for Homemade Projects: PVC fittings 1-1/2 inch are widely used to build heavy duty items, such as patio furniture, 9 square in the air, building PVC pet structures, garden cage frames, homemade PVC shelves, making outdoor plant stand and PVC blanket forts.
  • Building Anything with PVC Fittings: 5 Way PVC fittings connect five pipe section....
Check Stock

MacWork Tailpipe Cutter，Exhaust Tube Chain Cutter，Features Pipe Cutter Chain/Cutting Wheels，Black

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
  • Keep well oiled, not for use on stainless steel.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed rotation.
  • The cushion grip handles ease pressure on your hand while you increase your grip.
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from during rotation.
  • Lightly lubricate cutting wheels before use.
Check Stock

Theia technical Tips&Electrode Harbor Freight Titanium 45 Plasma cutter 56576 56811 56255 40Amp (30)

  • ...pipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed rotation.
  • The cushion grip handles ease pressure on your hand while you increase your grip.
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from during rotation.
  • Lightly lubricate cutting wheels before use.
Check Stock

24 PACK 3 Way PVC Elbow Fittings 3/4 Inch White, 3 way PVC Pipe Connectors, Pipe Fittings, Corner Fitting, for Building PVC Furniture Greenhouse Shed Pipe Fittings Tent Connection

  • PVC MATERIAL - 3 Way PVC Elbow Fittings are made of high quality PVC material. With the feature of Low-Temperature-Resistant, Impact-Resistance, Ultraviolet-Resistance, Rust-Resistance.
  • IDEAL FOR CONNECTION- 3-way pipe fittings are ideal for center connections! Structural grade pvc has tapered edges and a beautiful glossy surface.
  • EAST TO INSTALL- The 3/4” pipe can be rotated and twisted into the 3 way pipe fitting during installation.
  • The deep sleeve allows the pipe to be inserted further into the joint in order to have a safer and more secure hold.
  • WIDE APPLICATION- Perfect for building greenhouse shed pipe fittings, tent connection, dog bed, hoop houses and so on.
  • GUARANTEE- Lifetime warranty for 100% money back or replacement, if you have any questions, please feel free to contact us.
Check Stock