Top Fuel Line Couplings
Lisle 39400 Angled Disconnect Tool Set
- Disconnects Air Conditioning and Quick Connect Fuel Lines..
- Disconnects spring lock couplings on Ford and Chrysler AC lines..
- Works on fuel lines and other quick disconnect couplings on domestic and import vehicles..
- The handles are angled to access tight spots. Made of durable plastic that resists fuels and solvents..
- Six sizes: 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8". All disconnects available individually skin-packed..
Check StockOnReal 7PCS AC Fuel Line Disconnect Tool Set,Includes 1/2 1/4 3/4 3/8 5/8 5/16 7/8 Inch Transmission Line Disconnect Tool for Most Ford/GM/Chrysler/Mazda Car
- DISCONNECTS FUEL & AC LINES QUICKLY - Easily disconnect quick connect couplings & fittings on many vehicles. Also fits push lock connectors on radiators and transmission lines..
- QUALITY CONSTRUCTION - Chrome-plated zinc alloy steel provides strength and lasting durability..
- COMFORT DESIGN - Easy grip handles offer you greater torque. Full metal scissor tools are compatible with most fuel filters..
- SIZES - Fuel Line Disconnect Scissor fits 4 sizes: 3/4.
Check StockMotis - Firefighting Mini Spanners, Lightweight & Portable Spanner Wrench, Must Have Firefighter Tools, Red, 2-Pack
- Ultra-lightweight & Accessible - A practical addition to your set of firefighter tools, our mini spanner weighs only 2.5 ounces each. It fits in your bunker gear pocket, making it easy to access any time, anywhere..
- Heavy-duty - Our mini spanner wrench is made of 6061 T6 aluminum, a metal suitable for tough tasks while firefighting. Small yet sturdy and tough, it excels at getting the job done.Tightens Couplings - Use this firefighter spanner wrench to tighten and secure loose couplings. Whether it’s for a standpipe connection or for an attack line, the spanners work on all caps and couplings on the fireground..
- Tightens Couplings - Use this firefighter spanner wrench to tighten and secure loose couplings. Whether it’s for a standpipe connection or for an attack line, the spanners work on all caps and couplings on the fireground..
- Undoes Couplings - No need to run back to the truck to grab spanners. Keep these mini spanner wrenches in your bunker gear pockets..
- Great Value Pack of 2 - This firefighter spanner wrench comes in pairs..
Check StockMr. Heater 20K BTU Natural Gas Blue Flame Heater with Built In Vent Free Blower Kit (2 Items)
- Product 1: 30,000 BTU Natural Gas heater to heat spaces up to 1000 square feet.
- Product 1: Blue flame burner for even convection heat. Maximum Elevation (Ft)-4500. Fuel Consumption/Burn Rate (Gal/Hr)- .030 MCF.
- Product 1: Automatic low oxygen shut-off system (ODS). CSA Certified.
- Product 1: Operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.included.Theromostat, legs and wall mounting hardware.
- Product 2: 5-piece universal gas-appliance hook-up kit.
- Product 2: Comes with everything needed for installing most gas appliances.
- Product 2: Includes 18-inch flexible gas line, 3 different couplings and on/off valve.
- Product 2: On/off valve provides easy servicing of appliances or summer shutdown.
Check StockAutoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft
- 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1,6AN PTFE straight hose end*6,6AN PTFE 45 Degree hose end*2,6AN to 3/8" hose adapter fitting*2, AN6 to 3/8"quick disconnect male*1,6AN to 5/16" hose adapter fitting*1..
- 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
- 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
- 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
- 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check StockUnisource 1500 Clear PVC Suction/Discharge Hose Assembly, 1\ Aluminum Cam And Groove Connection, 29.8\ Hg Vacuum Rating 85 PSI Maximum Pressure, 20' Length, 1\ ID
- GREEN SUCTION HOSE - 2" x 20’ green PVC suction hose with male and female water shank couplings.
- BLUE DISCHARGE HOSE - 2" x 50’ blue PVC discharge hose with male and female water shank couplings.
- WITH ROUND HOLE STRAINER - 2" round hole strainer is made of plated carbon steel for rust and corrosion resistant.
- HEAVY DUTY FOR LONGTIME USE - This water pump hose kit provides solutions to every agricultural application for the transfer of air, water, liquid fertilizer, fuel, and high pressure hydraulics..
- OUR PROMISE - If you received a damaged product, you can exchange it for free. If you’re not satisfied with the product, please contact us directly, we will try our best to solve the problem for you..
Check StockNEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case
- NexADD 4Pcs Fuel Line Pliers Set Does It All★- Eliminate the problems associated with removing fuel line connectors or undo fuel lines.This set includes 4 Pcs fuel line hose pliers,a hose remover pliers, a 9'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
- Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
- Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum openin....
Check StockLTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)
- This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
- PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
- Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
- This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
- 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
Check StockNew All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015
- ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
- ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
- ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
- ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
- middle layer: 304 stainless steel wire mesh sleeve.
- outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
- ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check StockMotis - Snagger Tool for Firefighting, a Powerful Multi Tool Firefighter Gear, Firefighter Tools, Red
- Allows Easier Hose Handling - Advance charged hose line more quickly and efficiently when firefighting. The Snagger allows you to turn your hand 90 degrees from its normal position when holding the hose which gives you better posture, more strength, and most importantly more leverage..
- Effortlessly Break Tempered Glass - This rescue tool can easily break tempered glass with its tungsten carbide tip..
- It’s a Spanner Already In Your Pocket - The Snagger Tool works on all caps and couplings as a spanner. Save a trip back to the truck, and use your Snagger to tighten or loosen hose couplings..
Check StockWetenex 1/4 Inch Fuel Line 6mm ID Fuel Line-5 Feet with 1/4 Fuel Filter + Fuel Line Clamps + Fuel Shut off Valve Switch
- Fuel line: high temperature resistance, good corrosion resistance, long service life.
- Fuel filter, 180 degree valve and clamp are fit for fuel line.
- Package include: 5 feet fuel line, 2 fuel filter, 12 clamp, 2 fuel Shut off Valve.
Check StockEVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)
- 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
- Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
- Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
- Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
- EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock