Top Fuel Line Fitting

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • ...along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
  • We Provided 12 months warranty from the date of purchased. Free return within 30 days NO QUESTION ASK..
Check Stock

Medoon 10ft 10AN Black Nylon And Stainless Steel Braided Fuel Oil Hose Fuel Line 10pcs 10AN Hose Fitting Kit 6pcs 10AN Hose Separator Clamp 2pcs 10AN to 10AN Male Coupler Adapter Straight Fitting

  • 100% QUALITY MATERIAL:Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum..
  • EFFECTIVELY:The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.10an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on..
  • USEFUL:Inner core CPE has excellent corrosion resistance. It is maintenance free and precision engineered to increase life.Working Temperature: -40 F to 257 F(-40°C to +125°C) under most operating. Working Pressure:500 PSI.
  • Package Including:10pcs 10AN hose fitting + 10Ft AN10 Stainless Steel Oil line + 6pcs 10AN Hose Separator Clamp + 2pcs 10AN male coupler.
  • 100% SATISFACTION:If you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem..
Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

  • ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
  • ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
  • ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
  • ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock

Mercury Marine Quicksilver New OEM 6.6 Gallon Gas/Fuel Tank &Line 1200-8M0054600

  • All Quicksilver tanks meet ABYC, CSA, & UL standards. High strength blow molded construction with protection against UV exposure and aging to help prevent fading and keep plastic pliable for longer life."Standard" tanks are furnished with 1/4"-18 threaded fuel line fitting and a manual venting cap."Premium" tanks include a 1/4" NPT threaded fuel line opening, a mechanical fuel gauge and top vented fuel cap..
  • Mercury Marine Quicksilver New OEM 6.6 Gallon Gas/Fuel Tank &Line 1200-8M0054600.
Check Stock

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

  • ...o kits instead of buying each tool . Just Add to Cart!.
  • Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
  • Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum opening approx: 9.3CM/3.66IN.NexADD fuel line clip removal tool suitable for use in large space.Fuel line hose clamp pliers designed to compress the quick disconnect lugs without damaging connector.Suitable for VW, Audi, Fiat, GM,Vauxhall,Mercedes and other makes and models..
  • 9" Length Fuel Filter Calipers ★- Releasing connect....
Check Stock

Attwood 93806MUSD7 Mercury Fuel Line Kit, 6 Feet Long, 3/8-Inch Diameter, Multi-Layer Low-Permeation Primer Bulb

  • Reliably delivers fuel to your Mercury engine.
  • Includes 6-foot-long, 3/8-inch diameter low-permeation fuel line.
  • Line is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
  • Comes with tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8896LP6.
  • Multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance.
  • Kit is compatible with Ethanol blended fuels.
  • For use with Mercury brand engines and tanks.
  • Male Universal Sprayless Connector (USC) tank fitting included.
Check Stock

ARES 10068 – 2-Piece Fuel & Air Conditioning Line Disconnect Tool Set - Release Spring Couplings on Fuel & Air Conditioning Lines – Compatible with Ford and Compatible with Chrysler LH Vehicles

  • INCLUDES: This 2-Piece Fuel and Air Conditioning Line Disconnect Tool Set includes two disconnect tools for easy, damage-free fuel and A/C line separation. This set features one ¾”, 5/8”, ½”, and 3/8” fuel and A/C line disconnect tool ,and one 3/8” and 5/16” scissor fuel line disconnect tool for separation and service..
  • DESIGN: Each quick disconnect coupler fitting has a locking mechanism inside the outer housing that goes over the lip of the fuel filter. This tool gets under the locking mechanism and releases the inner lip. This disconnect is necessary for Fuel, Heater, and A/C line service on many late model vehicles..
  • APPLICATIONS: These tools provide a release locking mechanism on all applicable size ranges (3/4.
Check Stock

Sierra International Moeller Marine 053701-10, Six Gallon All-in-1 Fuel Tank Combo Package

  • Industy's first all in one fuel tank combo package.
  • Applications with 2 prong barb engine fitting: 1998 and up Mercury, All J/E, most Yamaha O/B engines.
  • Includes: one Universal fuel line, one quick disconnct to fuel connector, three fuel line connectors (Johnson/Evinrude, Mercury, Yamaha), tank connector with sealant and hose clamp.
Check Stock

MSCRP Fuel Injection Line Fitting Adapter Kit EFI FI w/Filter/Regulator LS Conversion

  • 1Pc 6AN 25 feet of high-pressure fuel injection hose.
  • 1Pc 6AN to 3/8" Male Straight Filter Fittings+1Pc 6AN to 5/16" Fuel Filter Return Line Fitting.
  • 2Pcs 6AN to 3/8" Fuel Filter Feed Line Fittings+2Pcs -6AN to 1/4" NPT Fuel Pump Adapters+2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings.
  • 6Pcs straight -6AN Female to 3/8" Push Lock hose fittings.
Check Stock

EVIL ENERGY 6AN Y Adapter Block Coupler Union Fitting Splitter Flare Male Thread Aluminium Alloy Black

  • -6 AN to dual -6 AN Y fitting is made of aluminum alloy 6061-T6,and hard-anodized coating is compatible with alcohol, exotic fuel-additives, water and oil.It is suitable for fuel system components such as fuel hose line fitting, fuel pump, fuel filter, etc..
  • The thread size of the 3-way union Y block splitter is 9/16UNF.They are sealed by a 37 degree angle, which is easy to install and avoid leakage.Ideal for any liquid or gas application requiring a high flow separator..
  • Compared with the T fittings with 90 degrees, male flare thread Y connector split flow at 60 angles can presant less flow obstruction.
  • All three ends have a male AN fitting，the block can flow both ways..
  • EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..
Check Stock

MOTAFAR 6AN 45 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • 6AN 45 degree hose end fitting is suitable for all oil/ fuel/ water/ fluid/ air line, fit all stainless braided and nylon braided hose, can't fit PTFE fuel line and rubber fuel line.
  • Max working pressure is 1000psi, working temperature range is -65℉ to 252℉ (-53℃ to 122℃).
  • Designed for smooth flow, easy assembly, completely reusable, just disassemble and put onto another hose.
  • No leakage under high pressure and temperature.
  • Black anodized for durability, great appearance, and anti-corrosion.
Check Stock

Mophorn 8AN Fuel Line, 20 Pcs 8AN Fuel Hose Kit, 32.8Ft BK Nylon Stainless Steel Braided Oil Line Hose, NBR CPE Synthetic Rubber AN8 Gas Line, 8AN Universal Fitting Adapter Set with Aluminum Hose End

  • ... to 350℉. It is compatible with nearly every substance or agent used. Oil fuel line length: 10 m/ 32.8 ft..
  • 20 Pics Hose End Kit: Each nylon and stainless steel braided oil fuel line kit included 20pcs 8an hose ends (8pcs straight, 4pcs 45 degrees, 4pcs 90 degrees, 4pcs 180 degrees) and 32.8ft braided fuel line. Fitting professionally to manifest its best performance..
  • Suit for Various Uses: Fuel line widely used in the fuel system, transmission system, cooler system, and pump. It can be worked with racing fuel, pump gas, fuels with ethanol, alcohol-based fuels, motor oil & coolant, etc..
Check Stock