Top Fuel Measurement

PartsFlow 30 Gallon Gas Caddy Portable Fuel Tank Large Gasoline container Diesel portable gas tank with pump Rolling and Solid Rubber Wheels for Boat,ATV,Motorcycle,UTV,Car

  • portable gas tank with pump Can store gasoline, diesel, kerosene or biodiesel fuels.
  • The large fuel caddy allows you to store up to 30 gallons of fuel, Simply turn the hand pump forward or reverse for dispensing or siphoning fuel. The 8.2 foot hose with fill neck easily fits in any gas tank..
  • Hand Siphon Rotary Pump has been specially processed to have a better sealing effect and prevent gasoline or diesel from leaking.It adopts solid rubber wheels with special material,The Tire thickness is 2in and tire diameter is 9.5in. which can better load-bearing and wear-resisting. After our actual measurement, it can be suitable for many occasions..
  • Easy to use reversible rotary pump fills and siphons by simply reversing the cranking action. The easily accessible, wide diameter fill neck provides a larger opening for safer, faster refills with less spilling and less waste of expensive fuel..
  • This gasoline container is suitable for ATV, UTV, motorcycle, ship, motorcycle, etc.
Check Stock

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

  • ...op indicates that the valve is held open, burnt, or chipped.
  • Wide pressure fluctuation at high speeds indicates a weak valve spring.
  • Steady drop to zero pressure indicates a choked muffler.
  • EASY TO USE: Assembly and operating instruction manual included.
  • Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSIG (0-0.7 kg/cm²) pressure.
  • EASY STORAGE: Heavy-duty 12.75” x 2.25” x 7.25” inch (32.4cm x 5.7cm x 18.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization.
  • PACKAGE CONTENTS: Package includes (1) vacuum pressure gauge, (1) 2-foot (61cm) long rubber hose – 13/64-inch ID 23/64-inch OD, (1) brass cone adapter, (1) plastic connector, (1) 1/4”x18 male to 1/8”-27 female brass adapter, (1) 1/8”-27 male to 7/32” barbed brass fitting adapter, (1) 1/8”-27 female to 3/8” male brass adapter, (1) T-type 7/32” barded brass fitting adapter, (1) carrying case, and (1) instruction manual for your conveni....
Check Stock

PartsFlow 30 Gallon Gas Caddy Portable Fuel Tank Large Gasoline container Diesel portable gas tank with pump Rolling and Solid Rubber Wheels for Boat, ATV, Motorcycle, UTV, Car 4 Wheel

  • portable gas tank with pump Can store gasoline, diesel, kerosene or biodiesel fuels.
  • The large fuel caddy allows you to store up to 30 gallons of fuel, Simply turn the hand pump forward or reverse for dispensing or siphoning fuel. The 8.2 foot hose with fill neck easily fits in any gas tank..
  • Hand Siphon Rotary Pump has been specially processed to have a better sealing effect and prevent gasoline or diesel from leaking.It adopts solid rubber wheels with special material,The Tire thickness is 2in and tire diameter is 9.5in. which can better load-bearing and wear-resisting. After our actual measurement, it can be suitable for many occasions..
  • Easy to use reversible rotary pump fills and siphons by simply reversing the cranking action. The easily accessible, wide diameter fill neck provides a larger opening for safer, faster refills with less spilling and less waste of expensive fuel..
  • This gasoline container is suitable for ATV, UTV, motorcycle, ship, motorcycle, etc.
Check Stock

OMB Warehouse 2 Quart Plastic Racing Go Kart Gas Tank

  • ☆【Material】Made of High strength Metal with high hardness, durability and corrosion resistance, good sealing, do not worry about the oil leakage from the fuel tank.
  • ☆【Applicable models】The fuel tank fits Go kart and 4 wheel ATV 125-250CC. Known to fit Taotao Go kart and Modified ATVs..
  • ☆【Important parameters】 Side length 37cm.
  • The diameter of the mounting hole is 8mm, and the distance between the two mounting holes is 13cm..
  • ☆【Excellent technology】 High quality, perfect fit and contour. Easy installation and removal. Replace your Cracked or missing Tank with this Gas Tank..
  • ☆【Note】Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm..
Check Stock

New Carb Carburetor For 2001-2005 2010 2011 2012 Polaris Sportsman 500 4X4 HO

  • This carburetor is manufactured to the highest production standards which means that it is good at mixing fuel and air, keeps your engine running smoothly and prevents engine from lacking of oil or spilling.
  • Size: Intake Side inner Diameter : 1-9/16" (40mm) Intake Side Outer Diameter :1-13/16" (45.5mm) Air Filter Mount inner Diameter :2-3/16" (55.3mm) Air Filter Mount Outer Diameter : 2-5/16" (58mm).
  • Please allow 1mm error due to manual measurement. Please compare your carburetor with the pictures and make sure this part fit your motorcycle before you purchase. The oil channel of carburetors will be blocked without cleaning.Please clean up the oil channels and air filters as well as use the clean fuel before installing the carburetors..
Check Stock

Vance & Hines Replacement Baffle for Straightshot Performance Exhaust Systems 21877

  • Typically Reduce Sound Output by 2-3 db,Nice Aftermarket Replacement.
  • Dimension:7.75*2.1 Inch (Length*OD*),Pls Confirm the Inner Diameter of your Exhaust Pipe before Purchasing, Note: Not Fit for 2009 FXSTSSE.This Quiet Baffle is Hand-made and Wrapped in the Middle Part,pls Allow Minor Differences of the Measurement.
  • Quiet Baffle is Wraped by Silencer Cotton+Aluminum Foil ,it can be directly used on your bike,No Mounting Bolts Included.
  • Notes: It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carburated motorcycle, or new exhaust gaskets and a digital fuel processor when changing an exhaust system on a fuel-injected motorcycle. Discoloration (bluing) is caused by tuning characteristics, like cam timing, carb jetting, etc., and is not caused by defective manufacturing..
Check Stock

YHMTIVTU 2.1\ Quiet Baffle Exhaust Pipe Muffler Silencer Universal Fit for Motorcycles 1 Pair

  • Typically Reduce Sound Output by 2-3 db,Nice Aftermarket Replacement.
  • Dimension:7.75*2.1 Inch (Length*OD*),Pls Confirm the Inner Diameter of your Exhaust Pipe before Purchasing, Note: Not Fit for 2009 FXSTSSE.This Quiet Baffle is Hand-made and Wrapped in the Middle Part,pls Allow Minor Differences of the Measurement.
  • Quiet Baffle is Wraped by Silencer Cotton+Aluminum Foil ,it can be directly used on your bike,No Mounting Bolts Included.
  • Notes: It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carburated motorcycle, or new exhaust gaskets and a digital fuel processor when changing an exhaust system on a fuel-injected motorcycle. Discoloration (bluing) is caused by tuning characteristics, like cam timing, carb jetting, etc., and is not caused by defective manufacturing..
Check Stock

Attwood 8806LPG2S Portable Marine Boat Fuel Tank, EPA-Certified - 6-Gallon - with Fuel Gauge

  • ☆【Material】Made of High strength Metal with high hardness, durability and corrosion resistance, good sealing, do not worry about the oil leakage from the fuel tank.
  • ☆【Applicable models】The fuel tank fits Go kart and 4 wheel ATV 125-250CC. Known to fit Taotao Go kart and Modified ATVs..
  • ☆【Important parameters】 Side length 37cm.
  • The diameter of the mounting hole is 8mm, and the distance between the two mounting holes is 13cm..
  • ☆【Excellent technology】 High quality, perfect fit and contour. Easy installation and removal. Replace your Cracked or missing Tank with this Gas Tank..
  • ☆【Note】Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm..
Check Stock

OTC 3820-06 Low Amp Probe

  • Measures current range: 0-60 ampere AC/DC.
  • Works for ignition coils, fuel injectors, relays, electric motors and parasitic draw.
  • The AC/DC current measurement is non-intrusive.
Check Stock

Bosch 17025 Oxygen Sensor

  • Bosch Premium Wideband A/F Oxygen (O2) Sensors are designed for use with aftermarket high performance wideband kits.
  • Advanced Wideband sensing element for an exact air/fuel measurement vs. a typical oxygen sensor which simply sends a rich or lean signal.
  • Robust sensor design increases sensor longevity.
  • Seared protection tube due to 100% functional quality test.
  • True Direct-fit' OE connectors and harness.
  • threads pre-coated with anti-seize compound right out of the box.
Check Stock

Hromee Fuel Pump and Vacuum Tester Gauge Carburetor Pressure Diagnostics Leakage Tool Kit

  • ... system, carburetor and intake manifold for leaks, vacuum or pressure loss. Set includes a variety of adapters suitable for most vehicles.
  • Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar)..
  • PRESSURE GAUGE - The gauge has 4 inches diameter large scale, color-coded measurement, rubber surrounded protective and a hook on the top. so it’s easy to read and use. Range of vacuum dials is 0-28in/Hg Vac, 0-70cm/Hg.
  • Range of pressures dials is 0-10 psi/g, 0-0.7 kg/cm2..
  • HOSE AND ACCESSORIES - The kit comes with a 2ft/61cm rubber hose (13/64-inch ID and 23/64-inch OD). The max working pressure is 40PSI. Other accessories include (1)conical adapter, (1)plastic connector, (1) 1/4”x18 male to 1/8”-27 female adapter, (1)1/8”-27 male to 7/32”barbed fitting adapter, (1)1/8”-27 female to 3/8”male adapter, (1)T-type 7/32”barded fitting adapter..
  • EASY STORAGE - Heavy-duty 11”x 5.7”x 2.4”inch (28cm x 14.5cm x 6cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization..
Check Stock

Breath Ketosis Tester Portable Ketone Breath Analyzer Professional Grade Accuracy Ketosis Breath Meter for Track Your Ketones

  • ...n-invasive device uses advanced sensor technology to detect the concentration of acetone in the breath, which is a reliable indicator of the body's ketone levels..
  • Ketone breath tester measures 6 levels of ketones up to 99 PPM (0.0 -99), using a PPM (Part Per Million) measurement. Ketone breath meter with 3 LED indications: Green Light (Ketosis Reading Successfully), Amber Light (Low Battery), Red Light (Ketosis Reading Unsuccessfully).
  • the keto tester device powered by 2*AA batteries (not included but commonly available)..
  • The ketone monitor needs to be exhausted before your first use. To do this, turn on the keto breath meter, wait for the 20 seconds countdown to be completed, and turn it off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, please blow immediately within first 5-6 seconds when displaying "blo" on the ketosis tester, since the breath acetone meter starts analyzing the breath right after the first 6 seconds.
  • The unit of measurement for breath ketone analyzer is parts per million(PPM). When the body enters a state of ketosis, it brgi....
Check Stock