Top Fully Welding Ball Valve

Motorized Ball Valve- 1/4 Stainless Steel Ball Valve with Full Port 9-24V DC and 2 Wire Reverse Polarity by U.S Solid

  • SAFE AND RELIABLE- Made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
  • NPT THREADING- 1/4” Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
  • 9V-24V DC- Works effectively over entire voltage range.
  • Limit switch cuts off power after valve is fully open....
  • 2 WIRE REVERSE POLARITY SETUP- Simple two wire connection, valve completely de-energizes after opening or closing.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a....
Check Stock

Motorized Ball Valve- 1/2 Stainless Steel Electrical Ball Valve with Full Port 9-24V AC/DC and 3 Wire Setup by U.S Solid

  • SAFE AND RELIABLE- The valve body is made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
  • NPT THREADING- ½" Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a....
Check Stock

Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

ABN Oxygen & Acetylene Torch Kit – 10 Pc Welding Kit Metal Cutting Torch Kit, Portable Cutting Torch Set Welder Tools

  • OXY ACETYLENE TORCH KIT: The ABN Oxygen Acetylene Torch Kit for Welding and Cutting is a 10 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
  • Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • EASY TO USE: To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
  • CREATING A NEUTRAL FLAME: A neutral flame creates carbon dioxide that purges air from the heated metal for easier cutting and welding.
  • To create a neutral flame, you must find the correct relationship of oxygen to acetylene.
  • After adjusting the pressure and connecting the oxygen and acetylene tank systems to the brazing torch kit, open the acetylene gauge and light the torch.
  • Begin opening the oxygen valve and continue adding oxygen until sharp cones are created at the tip of the portable torch.
Check Stock

1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/2" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

1/2 Brass Electric Solenoid Valve 110V AC NBR Seal N.O Air Gas,Fuel

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/2" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

1/4 Brass 12V DC Electric Solenoid Valve NPT NBR Seal Normally Open Air Water

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/4" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

1/4\ Brass Electric Solenoid Valve 110VAC Normally Closed VITON

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

1 Brass Electric Solenoid Valve 110VAC Normally Closed Water Diesel.

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

3/4 Brass Electric Solenoid Valve 24VDC N.C Air Water Fuel VITON

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

3/4\ Brass Electric Solenoid Valve 12VDC N.C. Air Water Fuel VITON

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

3/8 Electric Solenoid Valve 12-VDC VITON Gasket Air Gas Fuel Normally Closed

  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
Check Stock