Top Welding Valve Test Bench

Uniweld KC100P Centurion Weld Braze Outfit with 511 Plastic Carrying Stand brass copper blue

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Centurion series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

ABN Oxygen & Acetylene Torch Kit – 10 Pc Welding Kit Metal Cutting Torch Kit, Portable Cutting Torch Set Welder Tools

  • OXY ACETYLENE TORCH KIT: The ABN Oxygen Acetylene Torch Kit for Welding and Cutting is a 10 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
  • Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • EASY TO USE: To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
  • CREATING A NEUTRAL FLAME: A neutral flame creates carbon dioxide that purges air from the heated metal for easier cutting and welding.
  • To create a neutral flame, you must find the correct relationship of oxygen to acetylene.
  • After adjusting the pressure and connecting the oxygen and acetylene tank systems to the brazing torch kit, open the acetylene gauge and light the torch.
  • Begin opening the oxygen valve and continue adding oxygen until sharp cones are created at the tip of the portable torch.
Check Stock

Welding Gas Regulator Valve CO2 Gas Regulator Flowmeter Brass Welding Regulator Valve Brass Flowmeter Gas MIG Welding TIG Welding Equipment

  • 0 to 25LPM Output Flow: The output flow of CO2 gas regulator is adjustable from 0 to 25lpm. and represented by a ball moving up and down in flow tube..
  • Reliable Flowmeter: This flowmeter does not use a diaphragm and therefore more reliable than a flowmeter style regulator..
  • Material: The body material is brass that brass flowmeter has excellent ductility..
  • Application: Welding gas regulator valve is a kind of TIG welding accessory which is perfect for most welders..
  • Parameter: Welding regulator valve output flow range is 0-25LPM, pressure gauge range is 0-3500psi,threaded connection is 5/8in x 18 male connector....
Check Stock

KES Shower System Shower Faucet Set Rain Shower Head with Handheld Square Shower Valve Kit for Bathroom Wall Mounted Brushed Brass Finish, XB6223-BZ

  • cUPC Certified Pressure Balance Cartridge: The advanced pressure balance ceramic disc cartridge has cUPC certification and can prevent water scalding injuries caused by sudden changes in the hot or cold water pressure. If inlet water temperature changes seasonally, please follow the included instructions to readjust the temperature limit stop. The recommended water temperature for a bath or shower is between 90℉ - 110℉..
  • 3-Function with One Switch: Select between large square overhead shower and hand shower separately or choosing overhead shower+hand shower simultaneously (choose among 3 shower settings with ONE SWITCH). Our shower valve comes with built-in diverter. Ceramic disc diverter valve provides smooth and easy function-switching operations..
  • Ultra-strong & Burst proof: This rain shower head is manufactured with ultrasonic welding technology and has passed the 3.45mpa hydrostatic test. With this special design, you can rest assured to use this sturdy and burst proof faucet..
  • Full Coverage: Unlike other shower heads that are 4" or 6.
Check Stock

Uniweld KCHP Cap n Hook Brazing/Welding Outfit Tanks Not Included

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-tanks not included (sold separately).
  • Cap'n hook five flame tip for brazing up to 1" copper tubing-u's Patent no. 4,191,333.
  • Welding/brazing tip for brazing up to 1" copper tubing and welding up to 1/8" steel.
  • Centurion series regulators with Protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate Gas control.
Check Stock

Welding Gas Regulator Valve CO2 Gas Regulator Flowmeter Brass Welding Regulator Valve Brass Flowmeter Gas MIG Welding TIG Welding Equipment

  • 0 to 25LPM Output Flow: The output flow of CO2 gas regulator is adjustable from 0 to 25lpm. and represented by a ball moving up and down in flow tube..
  • Reliable Flowmeter: This flowmeter does not use a diaphragm and therefore more reliable than a flowmeter style regulator..
  • Application: Welding gas regulator valve is a kind of TIG welding accessory which is perfect for most welders..
  • Material: The body material is brass that brass flowmeter has excellent ductility. Can be used with peace of mind.
  • Parameter: Welding regulator valve output flow range is 0-25LPM, pressure gauge range is 0-3500psi,threaded connection is 5/8in x 18 male connector and the air pipe interface is 1/4in..
Check Stock

Lisle 36050 Valve Keeper Remover and Installer Kit

  • Quickly Removes and Installs Valve Keepers On Most Overhead Valve Engines With Valve Stems From 4.5 to 7.5mm and 5/16" to 3/8"..
  • Makes valve component disassembly and reassembly fast and easy. Push or tap tool with a hammer to remove valve keepers. Magnet in tool body captures keepers for quick removal and valve disassembly..
  • To install keepers, load in retainer on valve stem, then push or tap handle to install. Can be used on the car or bench..
  • New smaller size works on Toyota four cylinder and Chrysler New World Engine applications..
Check Stock

American Standard RU101SS Flash Shower Rough-in Valve with Universal Inlets and Outlets with Screwdriver Stops, Unfinished

  • Choice of Connections: Fast and easy installation without adaptors reducing leak points.
  • Available connections include Universal (male thread/female sweat), PEX Crimp, PEX Cold expansion, CPVC, and Stub outs.
  • Cast Brass Valve Body: Durable. Ideal material for prolonged contact with water.
  • Flat Back: Allows valve to be mounted flush against cross brace for easy and solid installation.
  • Test Cap: Allows valve body to be tested and flushed without the presence of the valve cartridge.
  • Can be tested using test cap with air (200 psi) or water (300 psi).
  • Stainless Steel Retaining Ring with Flats: Secures test cap/ cartridge in place and eliminates need for screws.
  • Flats make it simple to loosen ring for quick, easy insertion/removal of test cap/cartridge.
  • Exclusive Plaster Guard: Plaster guard is designed to protect valve and act as a guide during installation.
  • It can serve as mounting support for thin wall installations.
  • Back to Back Capability: Hot and cold can be reversed quickly and easily.
  • Wide Rough in Range: From 1-3/4 Inches to 2-3/4 Inches from finished wall to the back of the valve.
  • Includes Screwdriver Stops for easy servicing at the valve.
Check Stock

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection 4-Pack

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Patriot series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

OTC 4573 Universal Overhead Valve Spring Compressor

  • OTC's Universal Overhead Valve Spring Compressor is a great option for compressing valve springs - facilitating valve spring removal or valve stem....
  • Ideal for use on installed cylinder heads, especially in vehicles with tight underhood clearances, but can be used for bench work as well.
  • Spring loaded jaws easily grip and compress valve springs.
  • Legs designed with a built-in offset to compensate for spring wind - keeping tool vertical and stable during use.
  • fits valve spring retainers up to 1-13/16 inch diameter.
Check Stock

DERACY Deluxe Adjustable Weight Bench for Full Body Workout Weight Capacity 1100 lbs Incline and Flat Weight Bench for Indoor Workout Home Gym

  • COMMERCIAL STANDARD. This weight bench is designed with unique triangle structure, steel welding base and heavy-duty steel, supports up to 1100 LBS,....
  • 10-POSITION WEIGHT BENCH. DERACY adjustable weight beach has 10-backrest pad position and 4- front seat position, fully meet all your workout needs,....
  • COMFORTABLE & ERGONOMIC DESIGN. DERACY weight bench features dense foam padding throughout for a soft firm surface, reduce muscle fatigue when you do....
  • EASY TO ASSEABLE & MOVE. Package included manual and installation tools,very easy to assemble. With the back wheel, you can easily move the weight....
  • BUYING NOW. If you have any quality problem about the weight bench, Please contact with us at any time.
Check Stock

WeldingCity 200-amp WP-26FV-25R Flexible Head w/Gas Valve Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Adapter 45V62

  • Premium quality 200-amp air-cooled WP-26 complete TIG welding torch package with 12.5-ft or 25-ft 1-piece EPDM rubber power cable. Shipped as un-assembled..
  • 12-pcs torch package includes: 200-amp air-cooled WP-26 series high quality silicone rubber torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper.
  • brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps)..
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve)..
  • 200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement of TIG welding torch for all mainstream welders on markets, as well as ideal for many other aftermarket or equivalent welders. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING..
  • U.S. based welding and hardware supplier. Strong technical support with experienced custom....
Check Stock