Top Furniture Insert Nuts

Heavy Duty Furniture Leveling Feet Adjustable Furniture Leg Levelers for Tables Chairs Cabinets Sofa Raiser, Support 1320LBs, T- Nut Kit 3/8”-16 Thread, Large Base,w/ 4 Felt Pads,12 Screws (4 Pack)

  • ✔Heavy Duty & Large Furniture Leg Levelers- Allow easy leveling of furniture at home, office, restaurant, school or café, to match in same height. They allow raising your furniture, and help slide your furniture at ease !.
  • ✔Adjustable Leveling Feet - 1.75” long steel insert with 3/8-16” thread.
  • Large Commercial Quality 1 3/8" Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability..
  • ✔1320LBs Max Support- Commercial quality furniture levelers, T-nuts and thread insert are made of steel that support over 330LBs per feet, a set of four support furniture weight 1320LBs!.
  • ✔For All Floors- Universal Nylon bottom that work for all floors such as hardwood/tile/carpeting floors. Comes with separate high density thick felt for hardwood floor to protect floor from scratches or harsh noises..
  • ✔Easy Installation- For furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height. Or, pre-drill a 1/2” hole and insert the Locknut with mounting screws ,stabilize the leveler and adjust to the desired height..
Check Stock

Anwenk Furniture Levelers Adjustable Furniture Feet Leveling Table Chair Levelers T-Nut Leg Levelers with High-Density Felt, 1/4-20x1\ Threaded Shank T-Nuts,24 Pack

  • ✔No More Folded Up Cardboard Under Table Legs! These furniture leg levelers with felt allow easy leveling of furniture at home, office, restaurant, school or café, to match in same height, and allows raising your furniture..
  • ✔Adjustable Furniture Levelers- 1” Long steel insert with 1/4”-20 thread.
  • 1/2” Thick base with high density felt.
  • Sturdy 1” Diameter Base and Fully Adjustable Height from 0.5” to 1.25” for Maximum Support and Adjustability..
  • ✔Easy Installation- For furniture legs with existing 1/4”-20 thread, simply screw in the leg leveler to adjust the height. Or, pre-drill a 5/16” hole and insert the t-nut for universal installation, screw in the Levelers and adjust to the desired height. (Comes with Installation Instruction.).
  • ✔High Density Felt Floor Protectors - Pre-installed with high density thick felt to protect your hardwood floor from scratches or harsh noises which works far better than the stick-on pads..
  • ✔Heavy Duty and High Quality- Commercial quality standard furniture levelers, T-nuts and thread insert are made of stainless steel that support over 100lbs per feet, so a set of four can support furniture over 400lbs!.
Check Stock

Anwenk Furniture Levelers Adjustable Furniture Feet Leveling Table Chair Levelers T-Nut Leg Levelers with High-Density Felt, 1/4-20x1\ Threaded Shank T-Nuts,12 Pack

  • ✔No More Folded Up Cardboard Under Table Legs! These furniture leg levelers with felt allow easy leveling of furniture at home, office, restaurant, school or café, to match in same height, and allows raising your furniture..
  • ✔Adjustable Furniture Levelers- 1” Long steel insert with 1/4”-20 thread.
  • 1/2” Thick base with high density felt.
  • Sturdy 1” Diameter Base and Fully Adjustable Height from 0.5” to 1.25” for Maximum Support and Adjustability..
  • ✔Easy Installation- For furniture legs with existing 1/4”-20 thread, simply screw in the leg leveler to adjust the height. Or, pre-drill a 5/16” hole and insert the t-nut for universal installation, screw in the Levelers and adjust to the desired height. (Comes with Installation Instruction.).
  • ✔High Density Felt Floor Protectors - Pre-installed with high density thick felt to protect your hardwood floor from scratches or harsh noises which works far better than the stick-on pads..
  • ✔Heavy Duty and High Quality- Commercial quality standard furniture levelers, T-nuts and thread insert are made of stainless steel that support over 100lbs per feet, so a set of four can support furniture over 400lbs!.
Check Stock

Furniture Levelers, Adjustable Leveling Feet for Furniture Leg Levelers, Table Chairs Cabinets Sofa Raiser, Heavy Duty Support 1320LBs, T- Nut Kit 3/8”-16 Thread, Large Base (4 Set, Black)

  • 【1320LBs Max Support】Commercial quality furniture levelers, T-nuts and thread insert are made of steel that Each leg can support 330LBs, so a set of four can support furniture 1320LBs..
  • 【Universal Design】Adjustable leg levelers can be installed on tables, chairs, cabinets, workbench, and so much more, universal nylon bottom that work for all floors such as hardwood/tile/carpeting floors. comes with 8 pcs high density felt pad to protect floor from scratches or harsh noises..
  • 【Adjustable Leveling Feet】Sturdy 1.75” long steel insert with 3/8-16” thread for maximum support and adjustability, commercial quality large base is 1-3/8" diameter 1/2” thick base and fully adjustable height from 3/4” to 1-3/4”..
  • 【Practical & Sturdy】Heavy duty leg levelers easy leveling of furniture at home, office, restaurant, school or cafe. It can support heavy furniture well, raise the height of your furniture, and help you slide your furniture easily , to provide you with effective solutions..
  • 【Easy Installation】Pre-drill a hole with a diameter of 1/2" and a depth of 1-1/2" the furniture leg, then insert the T- nut, screw in the leg levelers and adjust to the desired height. for furniture legs with existing 3/8"-16 thread, simply screw in the leg l....
Check Stock

1/4-20 Threaded Inserts for Wood T Nuts 1/4-20 Bolts Fully Threaded Button Head Hex Socket Screws 1 1-1/4 and Washers

  • This kit contains 40-Piece of 1/4-20 Threaded Inserts - 3/5" Length, 20 Piece of 1/4-20 tee nuts - 2/5" length, 30-Piece of 1/4-20 Bolts - 1" length, 10-Piece of 1/4-20 Bolts 1-1/4" length, 40-Piece of 1/4-20 washers..
  • 1/4-20 threaded inserts and t nuts are made of Carbon Steel ,zinc plated. 1/4-20 bolts and washers are made of stainless steel, they feature corrosion-resistance and rust-resistance..
  • Drilling Size for threaded inserts: ~soft wood - 23/64", if small, use 3/8", ~ hard wood - 3/8", if small, use 25/64"..
  • T nuts are great for furniture making and many wood project while leaving a flush surface, Barrel Height: 5/16″/ 7.9mm, Flange Diameter: 11/16″/ 17.5mm, Barrel diameter: 5/16″/ 7.9mm, Overall Height: 3/8″/ 9.5mm..
  • Wood threaded insert kit with screws, washers and t-nuts is ideal for wood furniture repair projects..
Check Stock

Heavy Duty Furniture Levelers Adjustable Furniture Legs Levelers, Leveling Feet for Tables Chairs Cabinets Sofa Raiser, Support 1320LBs, T- Nut Kit 3/8”-16 Thread, Large Base,w/ 4 Felt Pads (4 Pack)

  • Heavy Duty & Large Furniture Leg Levelers- Allow easy leveling of furniture at home, office, restaurant, school or café, to match in same height. They allow raising your furniture, and help slide your furniture at ease !.
  • Adjustable Leveling Feet - 1.75” long steel insert with 3/8-16” thread.
  • Large Commercial Quality 1 3/8" Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability..
  • Heavy Duty & 1320LBs Max Support- Commercial quality furniture levelers, T-nuts and thread insert are made of steel that support over 330LBs per feet, so a set of four can support furniture 1320LBs!.
  • For All Floors- Universal Nylon bottom that work for all floors such as hardwood/tile/carpeting floors. Comes with separate high density thick felt for hardwood floor to protect floor from scratches or harsh noises..
  • Easy Installation- For furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height. Or, pre-drill a 1/2” hole and insert the t-nut for universal installation, screw in the leg levelers and adjust to the desired height..
Check Stock

Glarks 253Pcs M6 Baby Bed Crib Screws Hardware Replacement Kit, M6x30/40/50/60/70/80MM Hex Socket Cap Screws with Nuts Washers and Tools for Chair Table Cabinets Furniture

  • ...he surface, make them have high hardness, perfect wear and rust resistance, smooth surface without burr, can be used for long times..
  • ♛【Product Feature】: Socket cap screws and barrel nuts with good match between them used for the manufacture of a solid joint for your furniture. Come with m4 m6 wrench and spanner can make your installation work easier. These screw bolt nuts are perfect for replacing old crib screws and joining wood, boards..
  • ♛【Nice Hardware Kit】: Except m6 socket cap screws and barrel nuts in most common set, we also offer m6 threaded insert nuts, m6 flat washers and m6 flange nuts in this set to make the connection between screws and furniture more fastening. One set included all you need to repair your furnitures, save time and money..
  • ♛【Widely Used】: Our baby bed hardware kit can be widely used for different kinds of furniture such as cribs, cupboards, wardrobes, bunk beds, etc. They are ideal tools for home and workplace..
Check Stock

Glarks 138Pcs M6 Baby Bed Crib Screws Hardware Replacement Kit, M6x25/35/45/55/65/75/85MM Hex Socket Cap Screws with Nuts Washers and Tools for Chair Table Cabinets Furniture

  • ...steel material, with yellow zinc plated on the surface, make them have high hardness, perfect wear and rust resistance, smooth surface without burr, can be used for long times..
  • ♛【Product Feature】: Socket cap screws and barrel nuts with good match between them used for the manufacture of a solid joint for your furniture. Come with m4 m6 wrench and spanner can make your installation work easier. These screw bolt nuts are perfect for replacing old crib screws and joining wood, boards..
  • ♛【Nice Hardware Kit】: Except m6 socket cap screws and barrel nuts in most common set, we also offer m6 threaded insert nuts, m6 flat washers and m6 flange nuts in this set to make the connection between screws and furniture more fastening. One set included all you need to repair your furnitures, save time and money..
  • ♛【Widely Used】: Our baby bed hardware kit can be widely used for different kinds of furniture such as cribs, cupboards, wardrobes, bunk beds, etc. They are ideal tools for home and workplace..
Check Stock

Glarks 253Pcs M6 Baby Bed Crib Screws Hardware Replacement Kit, M6x25/35/45/55/65/75/85MM Hex Socket Cap Screws with Nuts Washers and Tools for Chair Table Cabinets Furniture

  • ...steel material, with yellow zinc plated on the surface, make them have high hardness, perfect wear and rust resistance, smooth surface without burr, can be used for long times..
  • ♛【Product Feature】: Socket cap screws and barrel nuts with good match between them used for the manufacture of a solid joint for your furniture. Come with m4 m6 wrench and spanner can make your installation work easier. These screw bolt nuts are perfect for replacing old crib screws and joining wood, boards..
  • ♛【Nice Hardware Kit】: Except m6 socket cap screws and barrel nuts in most common set, we also offer m6 threaded insert nuts, m6 flat washers and m6 flange nuts in this set to make the connection between screws and furniture more fastening. One set included all you need to repair your furnitures, save time and money..
  • ♛【Widely Used】: Our baby bed hardware kit can be widely used for different kinds of furniture such as cribs, cupboards, wardrobes, bunk beds, etc. They are ideal tools for home and workplace..
Check Stock

Canitu 135Pcs Threaded Inserts Nuts Assortment Set, Zinc Plated Carbon Steel Hex Socket Drive Furniture Flanged Screw-in Nut with M4 M5 M6 M8 M10 for Wood Furniture with 5Pcs Hex Wrench

  • ... Threaded insert nuts provide a strong, permanent thread for wood and wood based sheet materials. The unique external thread ensures strong resistance against pull out and the flanged head prevents splitting of the surfaces and driving the Insert in too far..
  • ☼ High quality carbon steel with high hardness. These furniture screws are wear-resistant and very durable to use. Standard internal hex socket type without burr and non-slip design. Yellow zinc plated surface, anti-corrosion and anti-oxidation, with no burr and flanged anti-slip design, wear-resistant and very practical..
  • ☼ Convenient to use and carry. Pre-drill a proper hole (Suggest that the diameter of the hole is 9.6 +/- 0.2mm, the length is about 18mm), then use our internal hex wrench to screw in. Tip: If the furniture wood is with high-hardness, please enlarge the hole..
  • ☼ Total quantity: 135 pieces of Hex Inserts Nuts & 5Pcs of matching wrenches (35pcs M4*10, 30pcs M5*10, 25pcs M6*10, 10pcs M6*15, 15pcs M8*15, 10Pcs M8*20, 5pcs M10*20). Storage in a plastic case for easy acces..
  • These inserts nuts are strong and durable will works good for for soft woods of pine, plywood, fiberboard.
  • also great used for hard wood, such as solid wood, have a good effect in the advanced furniture combin....
Check Stock

Glarks 120Pcs M6 M8 M10 Brad Hole Tee Nut with Screws Assortment Set Zinc Plated Carbon Steel 3-Hole T-Nuts Furniture Hardware Flange Insert Female Thread for Wood Furniture

  • ♛【Package Include】: This brad hole tee nut set include 30pcs M6 M8 M10 T-nuts, each for 10pcs, which outer diameter is 36.3mm/1.43". As well as 90pcs mounting screws for your installation on wood furniture..
  • ♛【Premium Material】: The T-nuts are made of high-quality carbon steel, it has higher strength. With zinc plated on the surface gives it strong anti-corrosion and anti-rust performance, can be used for a long time..
  • ♛【Stable Flange Base】: Compared with ordinary nuts, three-hole T-nuts have better fastening effects, the screws used for fixing can strongly support the base. so they can be used for heavy furniture..
  • ♛【How to Use】: You need to drill a hole in advance, insert the nut part into the hole, and then fix the nut with self-drilling screw. Finally, install the threaded screw into the nut. Please confirm the size of the nut to be installed in advance..
  • ♛【Widely Application】: These T-nuts can work both indoors and outdoors, and are most suitable for wooden materials. It can be used to install furniture legs for beds, tables, closets, and can also be used to hang chandelier..
Check Stock

Furniture Leveling Feet Adjustable Heavy Duty Furniture Levelers for Cabinets Sofa Tables Chairs Raiser, Support 1320Lbs, T-Nut Kit 3/8”- 16 Thread (4 Set, Black)

  • 【EXCELLENT LEG LEVELERS】 Heavy-duty & large furniture leg levelers allow raising your furniture, and help slide your furniture at ease! Allow easy leveling of furniture use on tables, cabinets, bookshelves, plant shelves..
  • 【FLEXIBLE FURNITURE LEG】 Adjustable range - Long size is 0.7 -1.7 inch, Short size is 0.7 -2.2inch. It can be used on sloping floor or irregular ground to reduce the shaking and even tilting of furniture. Ensure beauty and safety..
  • 【FURNITURE PROTECTOR】Leveling feet wear-resistant nylon base allows Stop shaking and reduce vibration on uneven floors, your furniture to slide smoothly along the floor, protecting the floor from scratches or harsh noises..
  • 【1320LBS MAX SUPPORT】Commercial quality furniture levelers, T-nuts and thread insert are made of steel that support over 330LBs per feet, so a set of four can support furniture 1320LBs! Practical feet levelers make big difference to your life..
  • 【EASY INSTALLATION】 Pre-drill a 1/2” hole and insert the t-nut for universal installation, screw in the leg levelers and adjust to the desired height. Simply screw in the leg leveler to adjust the height..
Check Stock