Top Galvanized Conduit Clamps

Universal Roof Box U-Bolt Clamps Cargo Carrier Roof Rack Bracket Kit Van Mounting Fitting Kit 85mm Internal Width 40mm Thick Luggage Rack Adjustable U Bolt Quick Release Latch for Roof Box Hardware

  • UNIVERSAL FIT - Universal roof box u-bolt clamps fit for car crossbars within 80mm, can accommodate luggage racks up to 40mm/1.57 inches thick, widely used in hatchbacks, sedans, SUVs, off-road vehicles, etc. NOTICE: Not fit for THULE Roof Box.
  • SIZE: Inner width 83mm/3.27 inches, outer width 90mm/3.54 inches, screw diameter 7mm/0.27 inches, 40mm/1.57 inches thick.
  • NOT EASILY DEFORMED - Roof rack mount u-bolt clamps has a rubber gasket and a plastic back plate, which can protect your car from scratches to the greatest extent, and can increase friction, which has a high hardness, good confinement effect, strong bearing capacity.
  • GALVANIZED STEEL MATERIAL - Universal roof box u-bolt clamps using galvanized steel material, durable, alkali resistance, and has a clear thread, uniform force and not easy to slip to improve overall stability.
  • PACKAGE INCLUDED - Roof box rack mounting fitting U-Bolt clamp kits included 4pcs galvanized U bolts, 4pcs plastic backplane, 4pcs rubber gasket, 8pcs heavy lock nuts, 2pcs strap.
Check Stock

Greenlee 30590 Conduit Pulling Grip

  • Single weave galvanized steel mesh grip with flexible pulling eye.
Check Stock

BRUFER 5022 Brass Garden Hose Mender End Repair Kit with Galvanized Steel Clamps, 2 Male and 2 Female Hose Connector Sets - Pack of 2 Complete Sets with Clamps

  • Clamps have a galvanized steel finish for rust resistance.
  • Complete package includes 2 male and 2 female menders as well as 4 galvanized clamps.
  • Made from high quality solid brass for durability.
  • Easy to use kit for repairs to your garden hoses, sprayers, nozzles, etc..
  • Fits any standard small 3/8″ and some 1/2″ garden hose.
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Jersvimc 20Pcs 1 Inch Stainless Steel Conduit Clamps, Two Hole Strap U Bracket Rigid Pipe Strap Metal U Clamp Conduit Strap Tension Clips U-tube Clamp Heavy Duty

  • 1️⃣[ What You Get ]: 20 x conduit clamps, which fit for 1" / 25mm pipe, screw mounting hole diameter is 0.24" / 6mm, Hole Center Distance 2.5" / 64mm,total length is 2.8" / 71mm.For specific parameters, please refer to the dimension drawing in Figure 4..
  • 4️⃣[ High-quality material ]: The metal u clamp is made of high-standard stainless steel, which is strong and durable, and has the function of corrosion and rust prevention. Even if it is used to fix the pipeline for a long time, it will not be broken and has a long service life..
  • 5️⃣[ Advance Design ]: The steel u clamp adopts a special slot design, which makes it stable and not prone to deformation. The U-shaped double-hole design is stronger than other pipe clamps on the market. The use of superb manufacturing technology makes the surface smooth and free of burrs..
  • 6️⃣[ Multi-purpose ]: The conduit bracket is very practical and can be used for fixing pipes, used for fixing pipes of wood, masonry, stainless steel pipes, plastic pipes, and oil, water and gas media in power hydraulic systems. Used in metallurgy, chemical industry, vehicle....
Check Stock

4 in. Square Extension Ring, Drawn, 1-1/2 in. Deep with Twelve 1/2 in. KO's

  • With proper fitting can be used for Conduit, NMSC, Armored, Metal Clad, Flex cable.
  • Acceptable for use in two hour fire rated wall.
Check Stock

4 Pack | 6\ Pre-Cut PVC Rooftop Support | Pipe Support | 100% Recycled PVC

  • Popular Rooftop Sleeper Support Already Pre-Cut to 6" (152.4 mm) Length | Cost Effective Rooftop Pipe Support Solution.
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

8 Pack | 6\ Pre-Cut PVC Rooftop Support | Pipe Support | 100% Recycled PVC

  • Popular Rooftop Sleeper Support Already Pre-Cut to 6" (152.4 mm) Length | Cost Effective Rooftop Pipe Support Solution.
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

Tie Down 59075 Galvanized Cable (Includes 4 Anchors, 8 Clamps, 100 Feet Galvanized Cable), Pack , Black

  • 100 feet of 1/8" galvanized aircraft cable.
Check Stock

16 Pieces White Clamp for PVC Pipe Greenhouses, Row Covers, Shelters, Bird Protection, 2.4 Inches Long (for 1 Inch PVC Pipe)

  • What you can get: you will receive 16 pieces white grip clamps.
  • Appropriate size: the size of this grip clamp is approx. 2.4 inch in length, 1 inch in inner diameter.
  • Hold material on tubular frame: this white grip clamp is made of PVC material, with nice strength and good toughness, safe and reliable, easy to remove from the greenhouse film, will not break easily.
  • Wide application: can hold many kinds of sheet materials, and suitable for various type of pipes, proper for creating cold frames, greenhouse, shelters, row covers, etc.
  • Practical tools: these grip clamps are compatible with many types of pipes, including PVC or metal conduit.
  • Some applications include greenhouses, row covers, shelters, bird protection, dog beds, quilting frames and more.
Check Stock

PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC

  • Can Be Cut to Desired Lengths | Suggested minimum length is 6" (152.4 mm) to provide adequate stability..
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

Beaquicy STV-90 Dryer Duct Connector - Snap to Vent 90 Elbow - Indoor Hook-up Dryer Vent Kit

  • ✅【PRODUCT DESCRIPTION】: The STV-90 dryer duct exhaust connector consists of a buckle to the exhaust 90 elbow, a buckle connector and a sealing ring connected to the wall conduit or dryer conduit. 90 degree diameter elbow dryer connectors are used to attach semi-rigid or flexible dryer hoses without hose clamps. Made of silicone and other sturdy materials to ensure that dryer hose vent fittings do not crack, tear or squeeze when using connectors..
  • ✅【AIRTIGHT】: STV-90 dryer conduit connector Universal dryer connector for electric and gas dryers. The silicon seal ring of STV-90 dryer pipe connector provides you with a sealed dryer connection. The silicone seal has a strong viscosity and is not easy to fall off, making your dryer more efficient while consuming less energy, allowing clothes to dry faster and saving electricity..
  • ✅【90 DAYS WARRANTY】:The STV-90 dryer duct exhaust connector supports 90 days return and exchange. Our company attaches great importanc e to the shopping experience of each customer. Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve t....
Check Stock