Top Glass Drill Bit For Dremel

QWORK Multipurpose Drill Bits, 6 Pcs Set Multi-Material Drill for Drilling in Tile, Brick, Glass, Plastic and Wood

  • 1) One drill bit replaces two drill bits (1x glass & tile drill bit + 1x Mansonry drill bit), ideal for drilling fastner holes in bathroom tiles, or wall mirrors. Once it drills through the tile or mirror this drill bit will cope easily with any masonry behind it.
  • 2) Spear pointed design strong tungsten carbide tip can easily penetrate various material(tile, concrete, brick, glass, plastic and wood,etc) and reduces breakout.
  • 3) 6 Pcs drill bit set with 6 different sizes: 1x 3mm (1/8"), 1x 4mm(5/32"), 1x 5mm(3/16"), 1x 6mm (1/4"), 1x 8mm (5/16"), 1x 10mm (3/8").
  • 4) U type slot design with fast drilling dust remove, 3-flats shank allows drill bit to be held tightly and stably in power drill. When drilling hard material (glass, porcelain floor tile, marble or granite), please use water for lubrication.
  • 5) Heavy duty drill bits made by factory that manufactures products for big international tool brands with guaranteed quality. For genuine multi-material drill bit, please identify QWORK brand drill bits packed in sealed transparent plastic box with two sides of blue color stickers.
Check Stock

30Pcs Diamond Drill Bits Glass Hole Saw Drill Bit Set Cutting Remover Tools for Glass Porcelain Tile Ceramic Marble Granite Bottles DIY(6mm-50mm)

  • [Scope of application]:Diamond Hole Saw bits are versatile drill bits that allow you to cleanly cut glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass. It is important to note that you must keep your drill bit wet as the friction of the bits and materials build up heat quickly.
  • [Diameter Range]: 16 different drill bits included with this glass drill bit set to meet various demands. Includes the following diameters: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm, 45mm,50mm, 16pcs hole saw drills + 14pcs 6mm Hole opener.
  • [Supreme Quality]: These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes.
  • [Applicable Method]:1,Install the drill bit on a drill such as a hand drill.2,Since the hole opener does not have a central positioning bit, the hole is tilted at 45 degrees during operation, the speed of the drill is slowed down, and the glass and the stone are slowly contacted.3,When a glass or stone appears in a crescent (the crescent is positioned), then the vertical drill begins to work..
Check Stock

2.5mm Diamond Drill Bit Set 20 Pieces Twist Tip Drilling Sea Glass Shells Rocks for Ornaments Jewelry Necklace Earrings Pendants Bracelets Ceramic Porcelain Gems Includes Collet Compatible with Dremel

  • PREMIUM QUALITY 20 pcs Set of 2.5 mm Diamond Drill Bits Compatible with Dremel Brass Collet Included.
  • PRECISION TOOLS for drilling holes in sea shell, sea glass, beads, tough stones, gemstones, pebbles, precious and semi-precious stones, porcelain, optical material, composites and even rocks..
  • TOOLS for Jewelry Designers for drilling clean holes for making Earrings, Pendants and Bracelets. They have multiple layers of industrial diamond particles bonded to body which provides longer drill life..
  • FITS Dremel-Type Rotary Tool or Small Precision Drill Press. Special 2.5mm Brass Collet Included..
  • COOLING WATER NEEDED - High Quality Diamond Coated Drill Bits 20 pieces - Wet Type (water to be used during drilling).
Check Stock

Luo ke 100 Pieces Wool Felt Polishing Bits, 1/8 Inch Shank Felt Buffing Tips for Rotary Tool

  • ➥Materials: 100 Pcs wool polishing bit sets are made of high-quality Wool and shaft handle,high bond strength,coaxial good.
  • ➥Details: With 50 cylinder shaped grinding heads (diameter: 10mm/8mm/6mm/5mm/4mm).
  • 50 bullet shaped (diameter: 10mm/8mm/6mm/5mm/4mm).
  • ➥Feature: 2 kind of grinding head design meet your different need. 1/8 inch shank fits electric rotary tool, grinder, drill included dremel.
  • ➥Widly usage: Suitable for polishing metal and non-metal. such as metal, jade, various molds, glass, medical equipment, gold silver jewelry,etc.
  • ➥Package includes: 100 pieces compressed wool felt polishing wheel. Note: recommend to use with polishing compound.
Check Stock

Dremel Max Life 9901HP 1/8" (3.2mm) Tungsten Carbide Rotary Carving Bit

  • Dremel's line of Max Life high-performance rotary tool accessories provide long-lasting performance and impressive durability. Built to give you longer lasting, stronger performing, versatile accessories..
  • The Max Life 9901HP Tungsten Carbide Carving Bit is coated in titanium nitride and is engineered to last 2X longer than the standard, non-coated Dremel 9901 carving bit..
  • The tungsten carbide bits can be used for more aggressive applications to shape, smooth, or grind hard materials such as metals, hardened steel, fire ceramics, cast iron, plastics, and hardwoods..
  • The cylinder shape of the carving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and v-cuts.
  • Ideal for projects like metal or glass engraving, stone carving, or removing flash from castings.
Check Stock

Dremel 662 Diamond-impregnated Glass Drilling Bit, Rotary Tool Accessory with 3.2 mm Diameter for Drilling and Cutting Glass

  • Dremel accessory (662) diamond impregnated glass drilling bit is designed for straight or curved glass material.
  • Impregnated with full diamond particles which offers superior long life and durability.
  • Ideal for drilling holes in both flat and contoured surfaces eg glass or ceramic wall.
  • Accessory length: 44 mm, Maximum recommended speed: 35000 RPM.
  • Fits with all Dremel Multi-/Rotary tools or other 3,2mm shank size multi- / rotary tools.
Check Stock

K Kwokker 15Pcs Masonry Drill Bit Set 5/8\ to 1/8\

  • ...illing much more easier, less effort and work with a minimum of pressure. Like a hot knife thru butter! WATER IS THE KEY TO GETTING DRILL BITS TO LAST. PLEASE COOLING WITH WATER AND CONTROL THE SPEED WHEN DRILLING..
  • ☺[Widely Used Range, a Good Beginning is Half Done, Carbide Drill Bits Perfect For] masonry, title, glass, wood, plastic, ceramic, terracotta, brick, stucco, brick, cinder block, steel, laminate flooring, garden pot, marble, pickguard, mirrors, windows, etc. PLEASE NOTE THAT FOR DIFFERENT SIZES, IT IS RECOMMENDED TO USE DIFFERENT DRILLING SPEEDS TO PREVENT DRILL BIT DAMAGE CAUSED BY WRONG DRILLING SPEEDS..
  • ☺[1 x K Kwokker Ceramic Drill Bit Replaces Two Drill Bits (1 x Glass & Tile Drill bit + 1 x Masonry drill bit), Higher Efficiency] Custom triangle spear tip solves drill bit wander and slipping. U-shaped groove drill body, the drill body is central ground and anti-rust treatment, so that the drainage is smoother..
  • ☺[15 Years of Industry Experience, Professional Grade Ceramic Drill Bit Used in] General drill, electric drill, hand drill and bench drill, the drill bit can be installed and used. Impact drill is not recommended. High speed spiral can be effective in the removal of debris and it can improve your work efficiency. Here are t....
Check Stock

Gunpla 10Pcs Multi-Material Drill Bits Set, Cemented Carbide Masonry Drill Bits for Glass, Plastic, Tile, Concrete, Brick, Wall, Wood and Brick Wall 6mm

  • 【ALLOY STEEL MATERIAL】: Gunpla drill bits set forged from premium ALLOY STEEL quality, glass drill bits provide smooth, accurate drilling in ceramic tile, marble, mirrors, glass, aluminum, concrete and wood. The durable drill bit must be kept well lubricated for the best possible results. This is most commonly done by running water over the drilling surface.
  • 【DIMENSION】: Designed with a 6mm Spear-pointed Tip, the multi material drill bits have a 1/4 inches design that reduces breakout. Length: 70mm, Shank: approx. 3/16 inches. Our spear head drill bits are heavy duty, meant to serve for a very long time..
  • 【APPLICATION】: Ideal for drilling ceramic tiles, glass, marble, and mirrors. When drilling hard materials, please use water for lubrication, good cooling can extend the service life of the drill bit. The glass drill bits are typically used with electric drills to create holes in all these cited material.
  • 【TUNGSTEN CARBIDE TIP】: The ceramic drill bit feature a Tungsten carbide tip for extended bit efficiency and life. During the process of drilling, the coating rubs away the glass, creating a perfect hole in the material being drilled.
  • 【WHAT YOU GET】: The package includes 10pcs 6mm glass and tile drill bits and a plastic storage box, ....
Check Stock

6PCS Ceramic Tile Drill Bits, Mgtgbao Masonry Drill Bits Set for Glass, Brick, Tile, Concrete, Plastic and Wood Tungsten Carbide Tip for Wall Mirror and Ceramic Tile with Size (6mm-12mm).

  • _6 pieces fine grade high durable drill bits in 4 different sizes: that is 2 x 6 mm(1/4"), 1 x 8 mm(5/16"), 1 x 10 mm(3/8"), 1 x 12 mm(1/2") fit your different needs.
  • _ High Quality Multi-purpose Drill Bit Set: Tungsten Carbide Tipped for prolonged life and heavy-duty use.
  • _Special Design: U type slot design with fast drilling dust remove, 3-flats shank allows drill bit to be held tightly and stably in power drill..
  • _Cut Perfect Circles Holes: Suitable for glass, ceramic tile, wood, ceramic, stone, concrete, brick, etc. When drilling hard material (glass, porcelain floor tile, marble or granite), please use water for lubrication.
  • _ One drill bit replaces two drill bits (1x glass & tile drill bit + 1x Mansonry drill bit). Ideal for drilling fastner holes in bathroom tiles, or wall mirrors. Once it drills through the tile or mirror this drill bit will cope easily with any masonry behind it.
Check Stock

COMOWARE Masonry Drill Bit Set 10 pcs, Concrete Drill Bit for Ceramic Tile, Glass, Cinderblock, Hard Plastic, Cement, Cr45 Material

  • What you receive: you will get 12 pieces glass concrete drill bit set, with the size of approx. 6 mm, fitting your daily needs.
  • It can be installed in the general electric hand drill, bench drill.
  • The machine drill clamp range is 10 mm and above.
  • Reliable to use: the masonry drill bits are made of quality alloy, sturdy and reliable, anti-rust and wear-resistance.
  • With a reinforced head and nice hardness prevent bit cracking, it can provide a longer life.
  • Easy to use: designed with 1/4 inches hex shank, the carbide tip drill bit can be applied to all power tools more easily and securely, which will drill faster and smoother, saving your time and efforts.
  • Wide applications: the drill bit set can be applied to drilling glass, tile, ceramics, wood, marble, concrete, etc..
  • You should note that you have to remember to add water or coolant when drilling continuously.
  • Fine function: this glass and tile drill bit has a small incision and fine drill edge, the hole is smooth and complete, without leaving burrs, which will give you wonderful experience.
Check Stock

12 Pcs Diamond Drill Bits for Ceramic, Diamond Hole Saw Drill Bit Set Kit, Premium Glass Drill Bit for Bottles, Pots, Marble, Granite Stone, Tile Cutting 0.16 Inch - 1.18 Inch（4 mm - 30 mm）YLYL

  • 12 PCS DIAMOND HOLE SAW DRILL BIT SET INCLUDES: 0.16“/4mm(2pcs), 0.23“/6mm, 0.31“/8mm, 0.39“/10mm, 0.47”/12mm, 0.55“/14mm, 0.62”/16mm, 0.7“/18mm, 0.78”/20mm, 0.86”/22mm, 1.18“/30mm. The different sizes glass cutting drill bit to meet you various demands!.
  • SUPER MATERIAL: Glass drill bit for bottles are made of industrial grade carbon steel, sharp, fine workmanship and super wear-resistant, extended service life. Glass cutting drill bit are high quality and good performance that excellent for making clean and accurate hole..
  • WIDE USAGE: Diamond hole saw drill bit set kit removes a complete circle from glass, marble, tiles, granite, ceramic or other. Perfect for drilling glass, porcelain tile, granite, bottles, wood, blocks jars, ceramic marble and and other hard surfaces etc..
  • DIAMOND DRILL BITS FOR CERAMIC TIP: When you using the diamond hole saw, please use iubrication (water), iubrication will extend drill bits life..
  • SATISFACTION GUARANTEED: Our team is committed to providing every customer with good products and satisfactory service. If there are any probl....
Check Stock

Dremel Max Life 9903HP 1/8" (3.2mm) Tungsten Carbide Rotary Tool Carving Bit

  • Dremel's line of Max Life high-performance rotary tool accessories provide long-lasting performance and impressive durability that are built to give you longer lasting, stronger performing, versatile accessories.
  • The Max Life 9903HP tungsten carbide carving bit is coated in titanium nitride and is engineered to last 1.5X longer than the standard, non-coated Dremel 9903 bit.
  • The tungsten carbide bits can be used for more aggressive applications to shape, smooth, or grind hard materials such as metals, hardened steel, fire ceramics, cast iron, plastics, and hardwoods.
  • Ideal for projects like metal or glass engraving, stone carving, or removing flash from castings.
  • The ball nose shape of the carving bit can be used for deep removal or to hollow out material, the sides can be used to cut flat areas or round edges, and the tip makes round-bottom slots and grooves and can be used for rounded side cuts.
Check Stock