Top Gm Battery Terminal Adapter

Power Wheel Adapter with Fuse & Switch, Secure Battery Adapter for Dewalt 20V Lithium Battery, with 12 Gauge Wire, Good Power Convertor for DIY Ride On Truck, Robotics, RC Toys and Work Lights, 1 Pack

  • ...njection-molded，excellent scratch&shock resistance and chemical resistance and is impervious to heat, moisture, and corrosion, perfect for indoor and outdoor use..
  • Warning: This product is not a charger, it only outputs battery voltage and power directly from your battery. The red wire is connected to the positive terminal, and the black wire is connected to the negative terminal.
  • When using, the two wires shouldn't be in contact. If the adapter not be used for a long time, please separate it from the battery..
Check Stock

OTC 4614 5/16 Inch Side-Terminal Battery Wrench for GM Vehicles

  • Designed for use on GM side-terminal batteries or any 5/16 inch hex head battery bolt - perfect for the tight spaces often found under modern vehicle hoods.
Check Stock

Power Wheel Adapter for Ryobi 18V Battery with 30A Fuse & Wire terminals, Power Connector for Rc Car, 14 Gauge Robotics, Rc Truck, DIY, Work for Ryobi 18V P108 P107 P102 P100 Li-ion & Ni-Cd Battery

  • Better security: The adapter(1pcs included) is equipped with a fuse and high-quality silicone copper wire to prevent excessive transient current from damaging the battery and equipment. You can use it safely.
  • Perfectly compatible : work with for Ryobi 18V P108 P107 P102 P100 Li-ion & Ni-Cd Battery . Easy to install ,locks on you battery very well..
  • Easy to DIY operate:The adapter is equipped with wiring terminals, which is convenient for you to connect the power cord of the device with the power cord of the adapter faster and better..
  • Multi-scene use: Power wheels adapter has 12.5 inches of 14 gauge wire installed.
  • You can use it to upgrade your power wheels, Rc toys, Robotics DIY etc. Maximum permissible current 20A. This adapter will surely allow you to quickly and safely upgrade your power wheel and enjoy the beauty of DIY..
  • Tips: The red wire is connected to the positive terminal, and the black wire is connected to the negative terminal.When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter.If you don’t use it for a long time, please be sure to remove the battery form the adapter.
Check Stock

Power Wheel Adapter for Dewalt 20V Battery with Fuse & Wire terminals，Work with for Dewalt 20V DCB205 DCB206 DCB200 Lithium Battery；Power Connector for Rc Car, Robotics, Rc Truck,DIY use

  • Better security: The adapter(1pcs included) is equipped with a fuse and high-quality silicone copper wire to prevent excessive transient current from damaging the battery and equipment. You can use it safely.
  • Perfectly compatible : work with for Dewalt 20V /18V DCB200 DCB203 DCB205 DCB206 Li-ion batteries. Easy to install ,locks on you battery very well..
  • Easy to DIY operate: The adapter is equipped with wiring terminals, which is convenient for you to connect the power cord of the device with the power cord of the adapter faster and better..
  • Multi-scene use: Power wheels adapter has 12.5 inches of 14 gauge wire installed.
  • You can use it to upgrade your power wheels, Rc toys, Robotics DIY etc. Maximum permissible current 20A. This adapter will surely allow you to quickly and safely upgrade your power wheel and enjoy the beauty of DIY..
  • Tips: The red wire is connected to the positive terminal, and the black wire is connected to the negative terminal.When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter.If you don’t use it for a long time, please be sure to remove the battery form the adapter.
Check Stock

2 Packs Power Wheel Adapter for Dewalt 20V Battery with Fuse & Wire terminals, Work with for Dewalt 20V DCB205 DCB206 DCB200 Lithium Battery; Power Connector for Rc Car, 14AWG Robotics, DIY use

  • Perfectly compatible : work with for Dewalt 20V /18V DCB200 DCB203 DCB205 DCB206 Li-ion batteries. Easy to install ,locks on you battery very well..
  • Easy to DIY operate: The adapter is equipped with wiring terminals, which is convenient for you to connect the power cord of the device with the power cord of the adapter faster and better..
  • Multi-scene use: Power wheels adapter has 12.5 inches of 14 gauge wire installed.
  • You can use it to upgrade your power wheels, Rc toys, Robotics DIY etc. Maximum permissible current 20A. This adapter will surely allow you to quickly and safely upgrade your power wheel and enjoy the beauty of DIY..
  • Tips: The red wire is connected to the positive terminal, and the black wire is connected to the negative terminal.When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter.If you don’t use it for a long time, please be sure to remove the battery form the adapter.
Check Stock

Conext Link BTZ1-2 Battery Terminal Postive Negative 8 4 2 1/0 Gauge 2 Pack

  • Battery Terminal with Outputs: (1) 1/0 or 2 Gauge, (1) 4 Gauge, (2) 8 Gauge.
  • Included Negative Adapter to Use as Negative Battery Terminal.
  • Set Screws Hold Wire Securely in to Place.
  • Shinny Nickel Plated Finish Ensures Optinal Power Transfer.
Check Stock

Ten F1 to F2 Terminal Adapters for Lead Acid Battery - Step Up Adaptor

  • Package Includes : Ten Terminal Adapters.
  • Compatible with Sealed Lead Acid Batteries With an F1 Connector.
  • For 12v 5Ah, 12V 7.2Ah, 12V 8Ah, 12V 12Ah, 12V 10Ah that has F1 terminal.
Check Stock

Ampper Brass Long Stud Side Post Battery Terminal Bolt Standard Battery Side Post Extender Stud for GM Post Pack of 2

  • Brass standard side post battery extender terminal long side stud for GM battery post adapters..
  • One side (short side) stud thread: 3/8"-16, the other side (long side) stud thread: 3/8"-24..
  • Easy to install: direct fit replacement unit..
  • Used for side post bolt extender and wire directly hook up to battery..
  • 100% SATISFACTION : no reason for return or change, hassle free 1 years ..
Check Stock

Kicker 46BT4 Car Audio Positive - Negative Power Wire Cable Battery Terminal BT4

  • The KICKER BT4 battery terminal works with 1/0 to 8 Gauge wire..
  • This battery terminal uses Versa-Gauge connection points with oversized convex screws for rock-solid connections..
  • The wire receptacles work perfectly for clean, sharp install and a negative-post adapter collar that locks into place..
Check Stock

Power Wheel Adapter for V20 Craftsman 20V Battery with Fuse & Wire terminals, Power Connector for Rc Car, 14 Gauge Robotics, Rc Truck,DIY use, Work for MAX CMCB204 CMCB202 CMCB201 CMCS500B Battery

  • ... heat-resistance 14 AWG wire which own 20A max permissible current, you can use it safely..
  • Perfectly compatible : work with for V20 Craftsman 20V MAX CMCB204 CMCB202 CMCB201 CMCD700C1 CMCS500B Li-ion batteries. Easy to install ,locks on you battery very well..
  • Easy to DIY operate: The adapter is equipped with wiring terminals, which is convenient for you to connect the power cord of the device with the power cord of the adapter faster and better..
  • Multi-scene use: Power wheels adapter has 12.5 inches of 14 gauge wire installed.
  • You can use it to upgrade your power wheels, Rc toys, Robotics DIY etc. Maximum permissible current 20A. This adapter will surely allow you to quickly and safely upgrade your power wheel and enjoy the beauty of DIY..
  • Tips: The red wire is connected to the positive terminal, and the black wire is connected to the negative terminal.When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter.If you don’t use it for a long time, please be sure to remove the battery form the adapter..
Check Stock

Power Wheel Adapter for Dewalt 18V & 20V DCB205 DCB206 DCB200 Li-ion Battery, Power Wheels Battery Converter Kit with Switch & Fuse & Wire terminals, Work for Rc Car, 14AWG Robotics, DIY use(2 Packs)

  • ... and safely upgrade your power wheel and enjoy the beauty of DIY..
  • Work for Dewalt 18V 20V DCB 183 DCB200 DCB203 DCB205 DCB206 Li-ion batteries. Easy to install ,locks on you battery very well..
  • The adapter is equipped with wiring terminals, which is convenient for you to connect the power cord of the device with the power cord of the adapter faster and better..
  • The red wire is connected to the positive terminal, and the black wire is connected to the negative terminal.When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter.If you don’t use it for a long time, please be sure to remove the battery form the adapter.
Check Stock

ACDelco GM Original Equipment 15-73952 Heating and Air Conditioning Panel Mode Door Actuator

  • Corrects mode door malfunction caused by a failed actuator. Body Material- Plastic.
  • GM-recommended replacement part for your GM vehicle’s original factory component.
  • Offering the quality, reliability, and durability of GM OE. Terminal Type: Pin.
  • Manufactured to GM OE specification for fit, form, and function.
Check Stock