Top Go Kart Torque Converter Clutch

AlveyTech 5/8' Shaft Series 30 Torque Converter Driven Clutch for Coleman KT196 & CK196 196cc 6.5 Hp Go-Karts

  • This Comet TAV2 Series 30 style driven or secondary clutch pulley works in conjunction with a 3/4" shaft driver clutch and an asymmetrical drive belt..
  • Our 5/8" shaft Series 30 torque converter driven clutch for the Coleman KT196 and CK196 196cc 6.5 Hp go-kart is a high-quality aftermarket component of the go-kart's drive system..
Check Stock

Zipper Gap Buckle compatible with Neverfull Pochette Little Pouch Chain Strap Connective Buckle (Gold)

  • 【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
  • 【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
  • 【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
  • 【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
  • 【Go Kart Torque Converter Kit comes with】1 x 3/4" Drive....
Check Stock

MOOSUN GO-KART TORQUE CONVERTER CVT CLUTCH 3/4" COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420

  • 【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
  • 【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
  • 【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
  • 【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
  • 【Go Kart Torque Converter Kit comes with】1 x 3/4" Drive....
Check Stock

BLACKHORSE-RACING 30 Series Bore GO Kart CVT Torque Converter 3/4' Bore 6' Diameter Driven Asymmetric Go Kart Mini Bike + 5/8'' Driven Clutch Comet Kit + 725 Belt

  • ▲5/8″ Clutch 6″ Driven 30 Series Torque Converter: Part Number(Comet 219457a),6″ Diameter, 5/8″ Shaft Bore, 8hp Max.
  • ▲30 Series Torque Converter Driver Clutch, 3/4″ Bore, Replaces Comet 219552, 5957.
  • ▲ Replace Part Number: Comet 219552, Manco 5957, Yerf Dog Q43201W.
  • ▲ Perfect replacement driver clutch for small engines with up to 7 HP,Fitment: Mini Bike, Go Kart, Lawnmower And Many More.
  • ▲ Brand new high quality 30 series asymmetrical driven clutch with 3/16” key way and 3/4” ID hole..
Check Stock

MOOSUN 30 Series 6.5 HP Go Kart Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4' Bore 10T #40/41/420 China (Complete 3/4' Torque Converter Set)

  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches, fit all engines with a 3/4 inch straight crankshaft..
  • Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75.
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors..
  • Driver clutch bore: 3/4″(16mm), Driven unit: Overall Diameter 6″ (5/8″ driven pulley) , Belt Top Width: 19mm(3/4″), Sprocket teeth: 10 teeth for #40/41/420 chain.
  • This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware..
Check Stock

Go Kart Cart Torque Converter Kit 40 Series Clutch Pulley Driver Driven 8-18 HP

  • 40 Series Clutch Pulley Driver Driven 8-18 HP.
  • Fits all 8HP - 18HP engines with a 1" straight crankshaft with 1/4" keyway.
  • Includes: Driver Clutch, Driven Clutch, Belt, Jackshaft.
  • Includes: All mounting hardware attached to an easy to mount backing plate.
Check Stock

Centrifugal Go Kart Clutch, 3/4" Bore 10T 10 Tooth 6.5 HP for #40/41/420 Chain Predator 212cc Small Engine Minibike Lawnmower Fun Kart, 3/4 inch Clutch

  • This Go Kart Clutch 3/4" Bore 10 Tooth for #40/41/420 Chain, Fit for go kart, Mini Bike, Lawnmower, and fun kart，Also fits any other engines with 3/4 crankshaft and 3/16" keyway, most 5.5 HP clones, 6.5 HP clones, and 2-6.5HP motors in all brands..
  • 3/4 inch Bore Centrifical Clutch for Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
  • Compatible with 2-6.5HP engines HONDA GC160, GC190, GX120, GX140, GX160, GX200..
  • This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
  • 100% high quality material. MOJTBE Centrifugal Clutch is made of high quality iron material, sturdy, wear-resisting, fast heat dissipation, and with maximum torsion. Good quality not only can provide a safer guarantee for your life, but also good materials can increase product life..
Check Stock

Drive Belt For Coleman Powersports KT196 Go Kart Buggy 4 Wheelers 196cc 6.5HP

  • Our replacement torque converter asymmetric belt for the Coleman KT196 go-kart replaces the belt numbers 203589, 203589A, 203589 A/DF, and 5959 used on Comet style torque converters. Fits many converter 30 series Torq-a-verter drive systems..
  • Used On Most Manco, American Sportworks and Ken-bar Karts with 5Hp-7Hp engines. Also used on the Comet Tav2 bolt on Torque-a-verter kit..
  • Compatible with torque converters with a 6" distance between the driven pulley and the driver clutch. This distance is measured from the center of each pulley. Not compatible with units with a distance of 7" center to center distance. The belt is asymmetric with a 3/4" wide top face, 18 degree angle on one side, 2.5 degree angle on the other side..
Check Stock

Sibosen Torque Converter for Predator 212CC, 3/4' Go Kart Comet CVT Clutch 10T 40/41 and 12T 35 Chain Engine Drive Replacement Set of 30 Series

  • ✅Quality Ensurance for More Power: This go-kart torque converter is made of high-quality iron and aluminum material which is lightweighted, sturdy and durable while allows higher speeds out of small engine, and smoother acceleration. This clutch will help you get more power out of your small engine by reducing engine load..
  • ✅Complete Parts for Easy Assembly: This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Important parts have been assemblied.
  • ✅Universally Fit: This go-cart torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.
  • ✅Package Includes: 1 x 3/4" Driver Pulley.
  • 1 x 10 Tooth Sprocket for #40/41/420 Chain.
  • 1 x 12 Tooth Sprocket for #35 Chain(Chain not included).
Check Stock

30 Series Torque Converter Driver Clutch 212CC Go Kart Torque Converter Pulley Clutch 3/4 in Bore Replaces comet TAV2 30-75 Replaces predator 219552 manco 5957 yerf dog Q43201W Max Torque

  • 【 30 series go kart torque converter Engine comet manco】：Featuring 6" diameter with 3/4" Bore, 3/16" Key way . 3/4" bore designed for 6.5hp....
  • 【This 3/4" 30 series Torque Converter is a direct replacement kit for the most popular comet TAV2 go-kart torque converter】Fits for engines with....
  • 【Applicable engines and model】comet 30 Series Replacement Torque Converter Driver bolts on to most engines with a horizontal shaft including :....
  • 【High Quality】Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat....
  • 【Excellent Customer Service】：We have professional team to offer you excellent service. If you have any problem, Please feel free to contact us..
Check Stock

VASHLY Go Kart Clutch 3/4" Bore 10T with #40 41 420 Chain for Go Kart Minibike and Fun Kart Engine

  • ...- 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200. And for Briggs Stratton and 2-6.5 HP with 3/4" Shaft..
  • 【Product Material】 The Go kart ​clutch is made of quality iron material, which is lightweight, portable, sturdy, and durable, has maximum torque, is wear-resisting, and has fast heat dissipation..
  • 【Easy to Install】 Easy to install, Metric Property Bolt and Washer Kit are Included. Mounts Onto Crankshaft Using Bolt and Washer on the End of the Crankshaft. Bi-directional Operation, Clutch Can be Mount Inward or Outward on Crankshaft..
  • 【Before Purchasing】Package Includes 1 x 3/4 10 Teeth Clutch, 1 x #40/41/420 Chain, 2 x Clutch Bolts 、2 x Washer Kits, and 2 x Screw wrenches, Please check carefully up and below information about our go kart clutch 3/4" Bore 10T shaft fitment before your purchasing, If you have any question, please contact us first, thank you!.
Check Stock

Flieeya Polaris RZR 1000 XP & S Drive Clutch Aluminium Alloy Powersports Clutch Compatible with 2014-2020 RZR 1000 XP XP4 & 2016-2019 RZR 1000-S Models, with Weights & Spring

  • Go Kart Clutch 3/4 Bore 12T for 35 Chain, Perfect for Go Kart, Minibike and Fun Kart Engine 3/4 Bar.
  • Centrifugal Clutch Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Briggs and Stratton Tecumseh Engines 2-6.5 HP with 3/4” shaft.
  • Mini Bike Clutch Fits Any Other Engines with 3/4 Crank Shaft and 3/16” Keyway, Most 5.5 HP Clones, 6.5 HP Clones and 4-7HP Motors in All Brands.
  • Double Protection: Predator Engine Go Kart Clutch Bolt,Washer,Screws and Allen Wrench are All Included. Mounts Onto Crankshaft Using Bolt and Washer on the End of the Crankshaft and Using Screws Set for Double Secures Your Clutch to the Engine.
  • OEM Replacement Quality: Made of Quality Iron Material, Which is Lightweight, Portable, Sturdy, Durable, Maximum Torque, Wear-resisting and Fast Heat Dissipation.
Check Stock