Top Gorilla Two part Epoxy

Oatey 31270 Tubes Epoxy Putty, Display 4-Ounce, Sold as 3 Pack

  • All Purpose Epoxy Putty: A hand mixable two-part epoxy putty stick quickly repairs and fills anything made of metal, wood, glass, ceramic, stone, and plastic after kneading evenly..
  • Cure TIme: Use a scraper to cut the cement crack filler in 1:1 ratio, knead by hand evenly until the epoxy putty turn to light gray. The mixture start hardening after 8 minutes. After 24 hours, plastic epoxy will harden like steel..
  • Superior Performance: Hand mixable 2 part epoxy putty sticks are tough, waterproof and resistant to heat and cold. metal epoxy putty can be cured underwater and can also withstand continuous temperatures from -50°C to 120°C. When epoxy clay putty is fully hardened, it is strong enough to sand, drill, mold and paint..
  • Eco-friendly Formula: Our plastic bonder is made of epoxy resin, which has strong adhesion. And the plastic filler putty does not contain any irritating substances or odors, safe for the elderly and children..
  • Our Promise: Choose us, you will get 120g universal repair filler, scraper*1, disposable gloves*1. We pursue high-quality products and customer service.....
Check Stock

RTG Wood Rot Repair Epoxy (Quart)

  • Clear, two-part, liquid epoxy treatment penetrates deeply to stabilize, harden, & seal damaged wood..
  • 100% waterproof epoxy restores the structural integrity and original strength of the wood..
  • Once cured, may be sanded lightly then primed & painted, or varnished..
  • No VOCs, no odor, and suitable for interior and exterior use..
  • Available in Pint, Quart, and Half-Gallon Kits. Each kit contains Part A (resin), and Part B (hardener)..
Check Stock

RTG Wood Rot Repair Epoxy (Half-Gallon)

  • Clear, two-part, liquid epoxy treatment penetrates deeply to stabilize, harden, & seal damaged wood..
  • 100% waterproof epoxy restores the structural integrity and original strength of the wood..
  • Once cured, may be sanded lightly then primed & painted, or varnished..
  • No VOCs, no odor, and suitable for interior and exterior use..
  • Available in Pint, Quart, and Half-Gallon Kits. Each kit contains Part A (resin), and Part B (hardener)..
Check Stock

Epoxy Putty, 120g 2 Part Fast Repair Epoxy Glue, Metal, Plastic, Wood, Glass, Ceramic Crack Filler, Heat Resistant and Waterproof (Grey)

  • All Purpose Epoxy Putty: A hand mixable two-part epoxy putty stick quickly repairs and fills anything made of metal, wood, glass, ceramic, stone, and plastic after kneading evenly..
  • Cure TIme: Use a scraper to cut the cement crack filler in 1:1 ratio, knead by hand evenly until the epoxy putty turn to light gray. The mixture start hardening after 8 minutes. After 24 hours, plastic epoxy will harden like steel..
  • Superior Performance: Hand mixable 2 part epoxy putty sticks are tough, waterproof and resistant to heat and cold. metal epoxy putty can be cured underwater and can also withstand continuous temperatures from -50°C to 120°C. When epoxy clay putty is fully hardened, it is strong enough to sand, drill, mold and paint..
  • Eco-friendly Formula: Our plastic bonder is made of epoxy resin, which has strong adhesion. And the plastic filler putty does not contain any irritating substances or odors, safe for the elderly and children..
  • Our Promise: Choose us, you will get 120g universal repair filler, scraper*1, disposable gloves*1. We pursue high-quality products and customer service. If you are not satisfied with waterproof putty, feel free to contact us via Amazon and we will provide you with a free replacement and a full refund..
Check Stock

SUPERCOAT Stone Gray Epoxy Floor Coating

  • Breathable two-part waterborne epoxy coating, Decorative flakes, Anti-slip aggregate, Cleaner/Degreaser included.
  • Professional grade floor covering, Easy to install, No acid etching or mechanical prep necessary in most cases, Clean with degreaser included, mix and apply with roller, Scatter flakes in wet epoxy.
  • Epoxy coating breathes allowing moisture vapors to pass through eliminating blistering and peeling, Resistant to automotive fluids, hot tire lift, Good adhesion to concrete and wood.
Check Stock

3M Panel Bonding Adhesive, 38315, 50 mL Cartridge

  • Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass).
  • A high performance two component epoxy adhesive..
  • Bonds a variety of steel, aluminum, SMC, and FRP (traditional fiberglass) non-structural components..
  • Also use to reinforce welded or riveted structural components..
  • Use with 08190 Performance Manual Applicator and 38191 Static Mixing Nozzle. The Net Fill amount is 47.5mL. Cartridge Volume is 50mL.
Check Stock

MMDENT New Composite Caulk Carpules Syringe Dispenser Gun Unidose Tip Applicator

  • Suitable Cartridge:It's NOT suit for 30cm and it works well on the 50ml kits. Don't be distracted by the plunger diameters as this tool also works on similar material kits with 2:1 and 1:1 ratios., Works replacment for Loctite, replacment for Devcon, replacment for Araldite, replacment for Gorilla, and others with standard 50ml cartridges..
  • Size：Fitting mixing.Applicable Rate: 【1:1 ratio and 1:2 ratio adhesive】 Fitting Capacity of Tube Cartridges : 【50ml Cartridges ONLY】.
  • Thick material: The handle is user-friendly, the appearance is generous, and the push rod is durable and not easy to wear. The cartridge slides in and is held firmly in place with the lever, then you can dispense mixed epoxy smoothly by squeezing the handles together. Note that you will need disposable mixing nozzles too..
  • Specifically used to smear or drip a variety of two-component adhesives or coatings, can completely solve the two-component adhesive products mixed uneven problems..
  • If you have any question, feel free to contact us and we will try our best to give you a satisfactory answer for you..
Check Stock

Loctite Epoxy Metal/Concrete, 0.85 fl oz, 1, Syringe

  • For Concrete and Metal Projects: Permanent, high-strength bond works great on railings, awnings, posts, brick, concrete and cinderblock without conducting electricity.
  • Fast and Professional: High-strength epoxy sets in just 5 to 12 minutes to a metallic grey finish to blend with metal and concrete.
  • Two-Part Adhesive: Convenient double syringe applicator dispenses equal parts epoxy resin and hardener for a tough, rigid, high-strength bond.
  • Resilient: Does not shrink and is resistant to humidity and water, most common solvents, and has high impact resistance and can be sanded, drilled, and painted.
  • Multi-Purpose: Versatile epoxy can be used as an adhesive for a wide range of materials like tile, wood, metal, ceramic, and glass or as a filler for gap filling, surface repairs and laminating.
Check Stock

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz, Pack of 2

  • No Drip Formula: Thicker no-drip gel formulation is idea for vertical surfaces and overhead repairs.
  • Fast & Easy: High-strength epoxy sets in just 6 minutes for quick repairs and fully cures in 24 hours.
  • Two-Part Adhesive: Convenient double syringe applicator dispenses equal parts epoxy resin and hardener for a tough, rigid, high-strength bond.
  • Resilient: Does not shrink and is resistant to humidity and water, most common solvents, and has high impact resistance and can be sanded, drilled, and painted.
  • Multi-Purpose: Versatile epoxy can be used as an adhesive for a wide range of materials like tile, wood, metal, ceramic, and glass or as a filler for gap filling, surface repairs and laminating.
Check Stock

TotalBoat TotalProtect Epoxy Barrier Coat System White Quart

  • High-build two part epoxy primer and barrier coat for use above and below the waterline.
  • Excellent for gelcoat blister prevention and repair work on fiberglass boats.
  • Provides superior protection on all underwater metals.
  • Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat..
  • Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200..
Check Stock

TotalBoat-439900 TotalProtect Epoxy Barrier Coat System (Gray, Gallon)

  • High-build two part epoxy primer and barrier coat for use above and below the waterline.
  • Excellent for gelcoat blister prevention and repair work on fiberglass boats.
  • Provides superior protection on all underwater metals.
  • Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat..
  • Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200..
Check Stock

TotalBoat-439901 TotalProtect Epoxy Barrier Coat System White Gallon

  • High-build two part epoxy primer and barrier coat for use above and below the waterline.
  • Excellent for gelcoat blister prevention and repair work on fiberglass boats.
  • Provides superior protection on all underwater metals.
  • Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat..
  • Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200..
Check Stock