Top Gpu For Q6600

CableMod Vertical PCI-e Bracket Black HDMI + DisplayPort

  • Heavy duty bracket to vertically show off GPU and water cooler. Compatible with most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX....
  • Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800 / Chipset -....
  • Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please....
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals....
Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

  • ...chine system comes with 1800W (176V-260V) professional Low Decibel mining machine power supply (It will not work under 110V household voltage), the decibel is about 50dB, suitable for home use. Up to 90% power conversion efficiency, allowing you to enjoy mining and save your power consumption at the same time..
  • 【8 GPU slots】8 GPU slots in the mining rig frame case, and the 65mm gap between GPU ports makes it quieter and easier to cool. The mining case support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPU simultaneously. But It is recommended to run only 4 PCS 3080,3090. Note: GPU longer than 32 cm in length are unavailable..
  • 【8 Adjustable Speed Fans】The mining computer case is equipped with 8 PCS cooling fans.The design of one air volume in and one out, the air volume is sufficient and silent enjoyment, escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
  • 【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to the official website of the system and downloa....
Check Stock

ASUS ROG-STRIX-RX580-O8G-GAMINGOC Edition GDDR5 DP HDMI DVI VR Ready AMD Graphics Card

  • 1380 MHz boost clock (OC Mode) for 7% performance improvement over reference.
  • Patented Wing-Blade for maximum airflow and longer fan lifespan.
  • ASUS Aura Sync RGB lighting features a nearly endless spectrum of colors with the ability to synchronize effects across an ever-expanding ecosystem of AURA Sync enabled products. Stream Processors - 2304.Engine Clock: 1360 MHz (Gaming Mode).
  • Industry-first MaxContact technology features an enhanced copper surface to allow for twice the GPU contact as traditional thermal solutions. Software : ASUS GPU Tweak II & Driver. Aura(Graphics Card) Utility.
  • Easily monitor and control your GPU's performance and cooling with the intuitive GPU Tweak II interface and Fan Connect II for GPU and CPU temperature sensing.
  • Auto-Extreme manufacturing technology delivers premium quality and reliability with aerospace-grade Super Alloy Power II components. OpenGL 4.5.
Check Stock

LINKUP - 30cm PSU PC Power Extension Cable Metallic Sleeved Silicone Coated Soft & Flexible to Route Custom Mod GPU & CPU w/Comb Kit┃1x 24P (20+4)┃2X 8P (4+4) CPU┃2X 8P (6+2) GPU┃300mm - Silver

  • 【Get Wired】High-quality, super soft, and routable modular 18AWG multi-color PSU cable extensions with durable silicone jacket cables for refined professional builds.
  • 【2 x CPU & 2 x GPU】2 x 4+4-Pin CPU power cables and 2 x 6+2-Pin GPU power cables bundled in one package. Suitable for new CPU & GPU. Also includes 24-Pin motherboard power cable.
  • 【Vivid】Mod your build with 3 unique color options in 30cm and 50cm.
  • 【Robust and Adaptable】All cables are manufactured with thick 18AWG UL 1015 Tinned Copper wires and come in a high-density flexible metallic sleeve allowing for an adaptable temperament. Comes with several cable combs to cleanly route and organize.
  • 【LINKUP Cares!】Backed by a LINKUP Limited 1-Year Warranty and complimentary premium online support. **NOTE: These cables do not arrive pre-curved. The photos listed are a representation of how the cables can be trained. With the braided design, these cables can be easily curved, as demonstrated in the listing photo.
  • 【Stiff Single 8-Pin GPU: B088P8QKRB】 【Stiff Single 8-Pin (4+4) CPU: B085YFQW6M】 【Stiff Single 4-Pin CPU: B08CFTSQ34】 【Stiff 2GPU+1CPU Set: B07JBN1RY6】 【Stiff 2GPU+2CPU Set: B07T8C98ZQ】 【Stiff 3GPU+2CPU Set: B088P7CNT5】 【Soft Cable Version: B08....
Check Stock

8 GPU Mining Rig Frame Fold Case, Ethereum GPU Mining Rig Complete Crypto Miner Including 8GB Ram/Motherboard/SSD/CPU/ Windows System/Hiveos Mining Machine(Excluding GPU PSU)

  • 【Mining rig Including】: B85 motherboard,CPU,128GB SSD, 8G DDR 3, 3000 rpm cooling fan * 5. win10 system (not activated) and HIVEOS installed USB disk (NOTE: GPU CARDS AND PSU NOT INCLUDING)..
  • 【8 GPU Mining Motherboard】: Intel-B85 mining motherboard,65MM slots' distance give a good heat dissipation when GPU cards installed.Usually suitable GPU type(1660/2060/3060ti/3070/3080/3090/A2000/A4000, 5600/5700/6600/580 etc).
  • 【 Complete Crypto Mining Box 】: High-quality steel material and Fold design make it is sturdy, durable and convenience. Full protection for GPU and electronice devices..
  • 【Heat dissipation and noise control】 :5 air out fans work at the same time, high speed air flow to achieve a well heat dissipation and do not make big noise..
  • 【NOTE】: GPU AND PSU DOES NOT INCLUDING. WE HAD SOLD THE MATCHED PSU AT OUR STORE.THE BOX IS SENT BY PARTS, YOU NEED BUILD UP IT BY YOUR OWN.VERY CONVENIENT TO ASSEMBLE..
Check Stock

MLLIQUEA 8 GPU Mining Rig Frame Case, Cryptocurrency Mining Machine System & Platform, Barebone Motherboard for ETH with 6 Cooling Fans, Miner Frame Case with SSD, RAM(Without PSU/GPU)

  • 8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 55mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. Small size, more suitable for mining factories. We can provide 24 hours technical support and no reason to return the product..
  • Upgrade Material - Our mining GPU frame case is made of high-quality steel, which is sturdy and durable, and can be reused. Six cooling fans, fast heat dissipation to ensure your normal use. Can fully protect your GPU and electronic equipment from damage and saves your use cost. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
  • Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 6 , 6 PIN cable to (6 + 2) Pin * 8pcs（male to male）, screws ​​package. There are two power connection methods: the built-in power supply requires you to purchase additional female to male cables, and the external power supply can directly use the male to male cables we give away. For detailed wiring, please ref....
Check Stock

8 GPU Mining Rig, Complete Ethereum Crypto Miner Mining Machine System Case with 4U 2000-3000W Power Supply ＆ 8 Cooling Fans, ETHW/ETC Miner Frame with Motherboard/CPU/Windows System (Without GPU)

  • ... customer support. If you encounter any problems or the goods you receive are damaged, please feel free to contact us and we will solve your problems in time. If you are not satisfied for any reason you can return the mining rig case for a full refund. We can offer a 30-day money-back guarantee..
  • √【Ultra-quiet 8 GPU Mining Rig】It is designed for cryptocurrency mining.The mining machine system comes with 2000-3000W (The power is 2000W when the voltage is 110V, and the power is 3000W when the voltage is 220V.) professional Low Decibel mining machine power supply, suitable for home use. Equipped with multiple power protections to provide your system with a more reliable and stable output voltage, providing more consistent power delivery..
  • √【8 GPU Slots】The mining machine system case comes with 8 GPU interfaces, and the GPU interface spacing is about 65mm. Enough spacing to ensure good heat dissipation is a necessary condition for mining any cryptocurrency. Allowing you to enjoy mining without any adjustment, with super high work efficiency..
  • √【8 Fans Support & Fan Controllers】 The cryptocurrency mining rig case is equipped with 8 PCS quiet cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to ....
Check Stock

LINKUP - 50cm PSU PC Power Extension Cable Metallic Sleeved Silicone Coated Soft & Flexible to Route Custom Mod GPU & CPU w/Comb Kit┃1x 24P (20+4)┃2X 8P (4+4) CPU┃2X 8P (6+2) GPU┃500mm - Gold

  • 【Get Wired】High-quality, super soft, and routable modular 18AWG multi-color PSU cable extensions with durable silicone jacket cables for refined professional builds.
  • 【2 x CPU & 2 x GPU】2 x 4+4-Pin CPU power cables and 2 x 6+2-Pin GPU power cables bundled in one package. Suitable for new CPU & GPU. Also includes 24-Pin motherboard power cable.
  • 【Vivid】Mod your build with 3 unique color options in 30cm and 50cm.
  • 【Robust and Adaptable】All cables are manufactured with thick 18AWG UL 1015 Tinned Copper wires and come in a high-density flexible metallic sleeve allowing for an adaptable temperament. Comes with several cable combs to cleanly route and organize.
  • 【LINKUP Cares!】Backed by a LINKUP Limited 1-Year Warranty and complimentary premium online support. **NOTE: These cables do not arrive pre-curved. The photos listed are a representation of how the cables can be trained. With the braided design, these cables can be easily curved, as demonstrated in the listing photo.
  • 【Stiff Single 8-Pin GPU: B088P8QKRB】 【Stiff Single 8-Pin (4+4) CPU: B085YFQW6M....
Check Stock

SUOHUI GPU Mining Rig Complete System for Ethereum Classic ETC, ETH, RVN, Flux, Ergo Crypto Miner with 8 GPU Mining Motherboard,PSU, RAM,SSD, Stackable Mining Frame Machine(Without GPUs)

  • ...ade of high-quality material, reinforcing the mobo with14 screws to protect it from being overshaped. The open-air frame ensures that the graphics card is not limited in length. You can easily stack multiple SUOHUI mining rigs at will without covering too much space..
  • 【8 GPU Mining Motherboard】: Our mining rig has installed a 8 GPU slots mining motherboard with SSD,RAM,CPU. 65mm spacing provides enough space between GPUs, suitable for AMD/NVIDIA GPUs. Note: The width of GPUs should not exceed 65mm..
  • 【1800W Stable Mining Power Supply】:This mining power supply uses 4U PSU rated output 1800W 12V full-voltage, can work under (110-220v）.10 long-line cables with 16x8 (6+2) pins and 6x6 pins, which can powers the mobo and GPU directly. Effectively improve conversion efficiency and reduce power loss..
  • 【4*4500rpm Silent Cooling Fans】4*4500rpm GPU cooling fans, professional silent design with adjustable fan speed controller, fully accelerating airflow to achieve the ultimate cooling effect. Let you easily enjoy the fun of mining at home..
  • 【Professional GPU Mining Rig】: SUOH....
Check Stock

LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX3090 RX6900XT x570 Z690 Tested] Shielded Gaming PCI Express Gen4 Reverse PCIE Connector w/ 270 Degree Socket {24cm} Compatible with NZXT H1 Without Screw

  • Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets. (Compatible with NZXT H1).
  • Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount.
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity.
  • Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases.....
Check Stock

Thermaltake Core G3 ATX Slim Small Form Factor Tt LCS Certified Gaming Computer Case CA-1G6-00T1WN-00

  • STAY SLIM – A compact micro-slim chassis design for the perfect fit at your desk or living room.
  • LAN PARTY READY – Perfect for at home or on the go, the Core G3 includes GPU padded braces and travel foams to secure your hardware during travel.
  • DUAL PLACEMENTS LAYOUT – Designed for horizontal or vertical layouts, the Core G3 takes both angles for even more.
  • FLOATING GPU DESIGN – Bring your GPU power to the forefront with a custom GPU mount turning the GPU face front for an unprecedented look.
  • OPTIMIZE SYSTEM VENTILATION – Two 120mm front fan pre-installed.
  • HANDY I/O PORTS – USB 3.0 x 2 , USB 2.0 x 2 , HD Audio x 1.
  • EXPANDABILITY – Two 3.5” or 2.5” drive bays with HDD Cage.
  • FULLY MODULAR – Provides multiple configurations and flexibility for custom PC enthusiasts.
  • SFX POWER SUPPLY READY – Thermaltake Toughpower SFX 600W 80+ Gold is the best choice for excellent balance between cost and performance.
  • Max CPU Cooler Height: 110mm / Max VGA Length: 310mm (With Front Fan) / Max PSU Length: 130mm.
Check Stock

LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX3090 RX6900XT x570 B550 Z690 Tested] Shielded Extreme High-Speed Vertical Mount Gaming PCI Express Gen4┃Universal 90 Degree Socket{20cm} 3.0 Gen3 Compatible

  • Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets..
  • Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount..
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity..
  • Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases..
Check Stock