Top Gpu Motherboard Minings

HUAXUCHENG BTC-X79-5 Card Mining Machine Motherboard, 5 PCI-E 3.0 Graphics Slot with 4GB ddr3 128GB MSATA, Support 3060 GPU Mining Rig (Mining rig(8GB RAM))

  • ...(spark), nicehash, minero (os) and other operating systems.) Provide professional technical support.
  • ❤ 3060 graphics card single-card computing power is as high as 48MH/s or more, which perfectly supports graphics card mining ETH, greatly improving the computing power mining function. BTC-X79-5 card mining machine motherboard, supports RTX3060TI, 3070 3080, 3090, 6800/6800XT, 6900/6900XT and other graphics cards..
  • ❤ X79-5 card mining machine motherboard adopts H61 chip, single-channel 2011 socket CPU. Design 5 Pcie3.0X8 interfaces. GPU Port Clearance: The port clearance between GPUs is 60mm. When using hiveos to start, enter the BIOS to set the U disk to start, wait for 2-3 minutes, and then enter the system. (The display is black at this time, which is normal.).
  • ❤ Specially designed for cryptocurrency mining - Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin and more. The noise of the BTC-X79-5 card mining machine is about 55db when running. It runs very quietly and is perfect for home use..
  • ❤ If you want to use other CPU, please use the CPU below Intel E5-2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2.
  • ❤Please note: Please connect the power supply to the 6pin of motherboard 1.3.6 for power supply to the motherboard. Pleas....
Check Stock

8 GPU Mining Rig Frame 68mm Slots with 8 Fans, Cryptocurrency Mining Machine with Barebone Motherboard for ETH/ Ethereum, Miner Case with RAM, SSD

  • 【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
  • 【8 Fans Support & Fan Controller 】 The cryptocurrency mining rig is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please....
Check Stock

SUOHUI Complete GPU Mining Rig Open-air Crypto Miner for Ethereum Mining Prebuilt 8 Slots Mining Motherboard,1800W PSU,4 Cooling Fans, 8GB RAM,128GB SSD, Win10 OS(Excluding GPU/1 Layer Miner)…

  • 【Professionally Installed and Test 】 This stackable miner is sturdy and durable with high-quality steel.Unique bottom plate not only for dust-proof and moisture-proof but also accelerate air convection and enhance heat dissipation. Fully protection for your GPUs and mining hardware..
  • 【8 GPU Mining Motherboard 】 Professional mining motherboard, designed for cryptocurrency mining. 8 NVIDIA or AMD graphics cards can be mixed use without additional GPU risers. 65mm spacing slot perfectly fits most GPUs and achieves high heat dissipation. Ensure better performance of GPU mining..
  • 【1800W Full Voltage Power Supply】 4U industrial control power supply, designed for GPU mining. The stable output of 1800W high power and conversion up to 90%. Available at 110V and 220V. 10 long-line power connection cables directly connect to the motherboard and GPUs. Reduce power loss and extend service life..
  • 【Ultra-quiet Controllable Cooling Fans】The mining machine has installed 4*4500 RPM silent GPU cooling fans and a fan speed controller. Controllable win speed allows accelerating airflow flexibility for optimal cooling. The professional mute design lets you easily enjoy the fun of mining at home..
  • 【Warmly Notes】: After receiving the miner, you need to conne....
Check Stock

SOONTECH Complete Mining Rig, Crypto Mining Rig Frame for Ethereum, 8 Gpu System Mining Rig, Including Motherboard, CPU, SSD, RAM, PSU(without GPU)

  • Please note: This product includes HP Power 750W (model: HP DPS-750RB A), with a power cord (110V and 220V can be used) when running without noise, very quiet. Does not include GPU and fan. win10 system (not activated, please do not buy if you mind).
  • Eth mining rig, including: motherboard, Intel CPU (with CPU cooler), 128GB SSD, 4G RAM,PSU,Breakout Board ,6 PIN cable to (6 + 8) Pin * 17pcs, ,win10 system. installation instructions。.
  • Two HP Power 750W (MODEL: HP DPS-750RB A) can be used at the same time, please contact customer service for purchase..
  • GPU Port Gap: the port gap between GPUs is 55mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 50mm, otherwise you will just put only less than 4pcs GPUs on the motherboard at the same time..
  • Note: If you have any questions, please contact us. We will solve your problem in time..
Check Stock

8 GPU Mining Rig 68mm Slots, Crypto Ethereum Miner Frame with Barebone Motherboard for ETH/ZEC, Cryptocurrency Machine System Case with SSD/RAM (Without GPU/PSU)

  • 【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
  • 【4 Fans Support】 The mining rig case is equipped with 4pcs 3000rpm cooling fans, which can provide airflow allowing for assistive GPU cooling..
  • 【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please feel free to contact me and we will provide you with technical support..
  • 【Mining rig case package】 Including: motherboard, Intel CPU, 12....
Check Stock

Cooler Master ELV8 Addressable RGB Vertical Universal Graphic Card Holder, Built-in ARGB 3-Pin Strip, Adjustable Length & Height Support

  • Protect the GPU: prevents GPUs from bending and sagging after long period of use..
  • Universal GPU support: Compatible with most GPUs using length and height adjustment.
  • Protect the motherboard: reduces stress on motherboard PCI-E slot by supporting the weight of GPU.
  • Co-designed with tantric mods: co-designed with one of the top modders and system builders in the world.
  • Rgb ready: Sync with as US, MSI, Gigabyte and ASROCK addressable for up to 16.8 million colors of control.
Check Stock

IIAzimps PCI-E Riser Card 010S 8 Solid Capacitors GPU Risers Adapter Card PCI-Express 1X to 16X Riser Card for Bitcoin Ethereum Mining BTC ETH Miner Rig (3 Pcs Pack)

  • Upgraded Version: The 010S PCI-E risers card is the newer upgraded version of the GPU risers 009S, expand the motherboard PCIE 1X to PCIE 16X slot, use gold plated contacts to ensure flawless connectivity and long life. Mainly designed for Bitcoin Ethereum Crypto Mining rigs and other GPU mining equipment..
  • More Stable and Secure: The graphics card power supply adopts 8 solid capacitors to ensure the graphics card mining stably and secure..
  • Multi-interface Design: 4PIN+6PIN interface design, With SATA 15pin Male to 4pin/6pin power cable, makes the graphics card power independent of the motherboard to reduce the burden on the motherboard when connecting multiple graphics cards..
  • Thoughtful Design: The PCI-E USB 3.0 cable uses multi-layer shielded wire, which can be connected to a maximum of 3M without attenuating the signal. 6 marquee LED lights display working status. The graphics card slot is metal shielded to prevent interference and with a fastening buckle, which provide a firmly connect..
  • Wide Compatibility: This GPU riser kit is compatible with 1x, 4x, 8x, 16x PCI-E slot of th....
Check Stock

TAYCCEU ATX CPU 8 Pin Female to 8 Pin (4+4) Male Power Extension Cable 2-Pack for Motherboard CPU Power Supply PSUs, 12 inch

  • Motherboard ATX CPU 8 Pin Extension Cable. Help you extend the connection from power supply to motherboard..
  • Connector A: ATX CPU 12V 8 pin female ( NOTE: it is CPU 8 pin, not pci-e 8 pin).
  • Connector B: ATX 12V 8 pin (4+4) male (Detachable CPU 8 pin(4+4) end could be used as EPS ATX 8 pin or P4 ATX 4 pin by sliding on/off the 4 pin.).
  • Compatible with power supplies with ATX 8 pin male port output & motherboards with ATX 4 pin or ATX 8 pin port.
  • (This cable is a common power supply extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output.).
  • Length:12inch(30cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Max power rating: 500W, Quantity: 2pcs.
  • Warning: This cable is used to extend the connection from power supply to motherboard.It does not work with GPU. If you use it to connect your GPU, it will definitely burn or damage the GPU and we won’t take any responsibility for wrongly using or installing..
Check Stock

Mining Rig Case 8 GPU Mining Case with 8 Powerful Cooling Fans and Mining Motherboard (Without GPU, PSU) for ETH/ZEC GPU Mining Rig Cryptocurrency System Machine

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports,and the GPU interface spacing is about 70mm. You can install 8pcs of GPUs on the motherboard at the same time. It’s compatible with a wide range of graphics cards..
  • 【8 Powerful Cooling Fans】The mining rig case include 8 powerful cooling fans. More quite, accelerating the air convection,the design of one air volume in and one out with more space keep the graphics card running at high performance..
  • 【Safe and Effective】The low power consumption, reduce heat generation, energy-saving, and safe use. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc..
  • 【Mining rig case Including】 motherboard, CPU, power switch line, 4G RAM, 3000 rpm cooling fan * 4, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package..
  • 【Tips】The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply Hard drive, and GPU to work normally. Please feel free to contact us if you have any questions..
Check Stock

SOONTECH Complete Mining Rig System for Ethereum Coin with Windows 10 Mining Motherboard Including CPU,SSD RAM,PSU Open-Pit Mining Machine,Frame Mining Machine EXCLUDING GPU/1 Layer Mining RIG

  • OUR FRAME MINING MACHINE DOES NOT CONTAIN GPU.This rack-mounted miner is made of the highest quality iron material and is durable. Fully protect your....
  • B85 frame type mining machine, professional design, accelerate air convection, super heat dissipation design. Sufficient space is reserved between the....
  • Please note: This product does not include GPU, install win10 mining system (The system is not activated), including 1800W, with power cord (both 110V....
  • B85 frame type mining machine, including: motherboard, Intel CPU 1840/1820 (with CPU cooler), 128GB SSD, 4G RAM,PSU,win10 system（The system is not....
  • GPU Port Gap: the port gap between GPUs is 65mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 60mm,....
Check Stock

EZDIY-FAB GPU Holder Brace Graphics Card GPU Support Video Card Holder Bracket Video Card Sag Holder/Holster Bracket Support AMD6700/Nvidia 3090- 309EZ-White

  • Lengthened and Bending shape design for latest big GPU, Supports Nvidia RTX 3000 AMD RX5000/6000 series..
  • Use sturdy aluminium alloy as the main structure to keep in lightweight and provide strong support.Prevents GPUs from bending and sagging after long....
  • The universal design of the support arm offers easy adjustment to fit a high range of graphics card and PC case combinations..
  • Protect the motherboard, reduces stress on motherboard PCI-E slot by supporting the weight of GPU.
  • Two kinds of rubber pad included, design for different cooling fan spacing of GPU..
Check Stock

EZDIY-FAB GPU Holder Brace Graphics Card GPU Support Video Card Holder Bracket, Video Card Sag Holder/Holster Bracket Support RX6700,RTX3090- 309EZ-Black

  • Lengthened and Bending shape design for latest big GPU, Supports Nvidia RTX 3000 AMD RX5000/6000 series, Only fits PC case with 7 or more-PCI Slot..
  • Use sturdy aluminium alloy as the main structure to keep in lightweight and provide strong support.Prevents GPUs from bending and sagging after long period of use..
  • The universal design of the support arm offers easy adjustment to fit a high range of graphics card and PC case combinations..
  • Protect the motherboard, reduces stress on motherboard PCI-E slot by supporting the weight of GPU.
  • Two kinds of rubber pad included, design for different cooling fan spacing of GPU..
Check Stock