Top Gpus For Mining Ethereum

MLLIQUEA 8 GPU Ports Mining Rig, Crypto Complete Mining Frame Machine with 2500W Mining Power Supply, Barebone B75 Motherboard for ETH with 8 Cooling Fans, Miner Frame Case with PSU, RAM, SSD

  • ...on - Upgraded version of the 8 fans with adjustable speed (2500rpm-4500rpm). If you feel that the fan is very noisy at work, you can adjust the fan speed regulator to reduce the rotation speed and reduce the noise. Low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum, and any other cryptocurrency..
  • Excellent Customer Service - Please read the manual before use. If you are not completely satisfied with your purchase for this miner, just contact us, and we will give you a satisfactory answer within 24 hours, You take no risk orders from MLLIQUEA..
Check Stock

PCIE Riser Cable VER006C,GPU Risers for Mining Rigs,GPU Extension Cable,GPU Crypto Currency Mining Cable with 6Pin-SATA Power Cable and 23.6in Extension Cable,Extend PCIE X1 to PCIE X16(PCE-VER006C)

  • 1.GPU Currency Mining Risers: PCE-VER006C is a premium quality PCIE riser cables for Bitcion, Ethereum GPU Mnining Rigs..
  • 2.Enough Power Supply: PCI Express Risers equipped with 20cm (11.81in) SATA to 6Pin power supply cable give GPUs sufficient power supply. Make sure GPUs works in high performance all the time..
  • 3. Expand to PCIE X16: This PCIE riser will extend PCIE X1 from mother board to external PCIE X16 slot for air cool GPU Mining rigs..
  • 4. Safety and Stable Risers: 3X solid capacitors,1X volatge transformer and 1X onductance inductance will prevent PCI Express Device over current,over voltage and over heat..
  • 5. Flexible GPU Connection:60cm/23.6in fully shielded USB 3.0 cable will extend PCIE signal out with little signal loss.Long enough extendsion cales will let user easy to place GPUs..
Check Stock

PXY-ELEC Complete 8GPU Mining rig System. B85 Full Mining Machine Includes Mining Motherboard ,CPU,(256) SSD,(8) RAM and PSU.Used for Build GPU Frame Mining rig ETH Miner(Without GPU)

  • ..., the B85 can be equipped with an additional layer (with support columns).more space-saving and organized. It is recommended not to exceed 4 layers.
  • The GPU interface spacing is about 65mm, enough spacing to ensure good heat dissipation is a necessary condition for mining any cryptocurrency such as Bitcoin (BTC) and Ethereum (ETC), but also please note that the width of your GPU should not exceed 65MM, otherwise Cannot install 8 GPUs.
  • B85 miner 128GB SSD pre-installed with Windows 10 (not activated) and Hiveos and 16GB USB. Can be modified to RaveOS, PiMP OS or other operating systems..
  • Customer service: If you encounter problems during use, please contact us, we will reply within 8 hours, please understand because of the time difference,.
Check Stock

8 GPU Mining Rig Frame with Mining Motherboard/SSD/RAM/CPU/Cooling 4 Fans ,Crypto Ethereum Mining Rig Case 8 GPU Slots for Cryptocurrency Bitcoin/Crypto ETH Miner (Without GPU and PSU)

  • 【Mining Rig Frame 】:It is specially designed for cryptocurrency mining (Monero/Ethereum/Ripple/Zerocoin/other),with 8 GPU slots (but without GPU), has 4 USB ports and 1 VGA ports.Support single power supply(Two cables of the power supply are connected to the motherboard, and the remaining eight cables are connected to the GPU. The power supply can directly supply power to the GPU, and there is no need to supply power to the GPU from the motherboard. ).
  • 【8 GPU -16X Slots】: 8* Pcie 3.0 slots on mining motherboard.The spacing between each GPU slot is 65mm (about 2.56in),gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,because 3060 GPU need dedicated motherboard)..
  • 【Upgrade Material】:Our mining GPU frame case is made of high-quality steel, the surface is flat and smooth, and the internal space is large. The internal motherboard design is great, the overall size of the chassis is 27.55in*15.75in*6.69in..
  • 【ETH Mining rig case Including】:motherboard, Intel CPU (with CPU cooling plate*1), power cord, 128GB mSATA SSD, 4G DDR 3, 5200 rpm cooling fan * 4, 8*(6+2)Pin graphics power cable (motherboard and fan power,all cables are 12V),screws*12, power switch....
Check Stock

Mining Rig Case 8 GPU Mining Case with 8 Powerful Cooling Fans and Mining Motherboard (Without GPU, PSU) for ETH/ZEC GPU Mining Rig Cryptocurrency System Machine

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports,and the GPU interface spacing is about 70mm. You can install 8pcs of GPUs on the motherboard at the same time. It’s compatible with a wide range of graphics cards..
  • 【8 Powerful Cooling Fans】The mining rig case include 8 powerful cooling fans. More quite, accelerating the air convection,the design of one air volume in and one out with more space keep the graphics card running at high performance..
  • 【Safe and Effective】The low power consumption, reduce heat generation, energy-saving, and safe use. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc..
  • 【Mining rig case Including】 motherboard, CPU, power switch line, 4G RAM, 3000 rpm cooling fan * 4, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package..
  • 【Tips】The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply Hard drive, and GPU to work normally. Please feel free to contact us if you have any questions..
Check Stock

MLLIQUEA 847 Mining Motherboard, 8 GPU Slots Mining Machine System, Cryptocurrency Miner Barebone Motherboard for BTC/ETH/ZEC with SSD, RAM

  • ... equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W PSU, which is sold in our store, more efficient mining..
  • Safe and Silent - It can ensure silent performance, low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
  • Eth Mining Rig - Motherboard: LGA(1150) CPU(with CPU radiating plate), 128GB SSD (Installed), 4G RAM, 6 PIN cable to (6 + 2) Pin 8pcs. Note: The hard disk is not equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use..
  • Note - The GPU miner machine system doesn't come with GPU or PSU. Our mining rig frame also can be used for RTX 3080/3090, but we recommend that you install 4-6 graphics cards, because after exceeding, the motherboard will automatically limit the computing power of the graphics card. You need to install your own power supply to work, and our motherboard only supports a single power supply. If you want to use a multi-channel power supply, you need to short-circuit it..
Check Stock

HUAXUCHENG BTC-X79-5 Card Mining Machine Motherboard, 5 PCI-E 3.0 Graphics Slot with 4GB ddr3 128GB MSATA, Support 3060 GPU Mining Rig (Mining rig(8GB RAM))

  • ...nterfaces. GPU Port Clearance: The port clearance between GPUs is 60mm. When using hiveos to start, enter the BIOS to set the U disk to start, wait for 2-3 minutes, and then enter the system. (The display is black at this time, which is normal.).
  • ❤ Specially designed for cryptocurrency mining - Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin and more. The noise of the BTC-X79-5 card mining machine is about 55db when running. It runs very quietly and is perfect for home use..
  • ❤ If you want to use other CPU, please use the CPU below Intel E5-2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2.
  • ❤Please note: Please connect the power supply to the 6pin of motherboard 1.3.6 for power supply to the motherboard. Please connect the fifth GPU to the monitor. Please contact us when the black screen appears..
Check Stock

MLLIQUEA 8 GPU Mining Rig Frame, 70mm Mining Machine System & Platform, Barebone Motherboard for ETH with 4 Cooling Fans, Miner Frame Case with SSD, RAM (Without PSU/GPU)

  • ...6 PIN cable to (6 + 2) Pin * 8pcs, screws ​​package. Compatible with Win10 /iOS, but you'll need to install the system yourself. (Graphics cards longer than 320mm cannot be used.).
  • Safe and Effective - It can be low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum (ETC), and any other cryptocurrency. Note: The hard disk is not equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use..
  • Note - The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply to work, and our motherboard only supports single power supply. If you want to use a multi-channel power supply, you need to short-circuit it. Please feel free to contact us if you have any questions..
Check Stock

MLLIQUEA 8 GPU Mining Rig Frame Case, Cryptocurrency Mining Machine System & Platform, Barebone Motherboard for ETH with 6 Cooling Fans, Miner Frame Case with SSD, RAM(Without PSU/GPU)

  • ... additional female to male cables, and the external power supply can directly use the male to male cables we give away. For detailed wiring, please refer to the picture or contact us..
  • Safe and Effective - It can be low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum (ETC), and any other cryptocurrency.(Graphics cards longer than 320mm cannot be used.) Note: The hard disk is not equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use..
  • Note - The GPU miner machine system doesn't come with GPU or PSU. Our mining rig frame can be used for rtx 3080/3090, but we recommend that you install 4-6 graphics cards. After exceeding, the motherboard will automatically limit the computing power of the graphics card. You need to install your own power supply to work, and our motherboard only supports single power supply. If you want to use a multi-channel power supply, you need to short-circuit it..
Check Stock

Dracaena 6 Pack PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X (6pin/ MOLEX/SATA Powered) LED Status Riser Adapter + 60cm USB 3.0 Cable (GPU Ethereum Mining)

  • Upgraded Version: The Dracaena PCIE Riser is a high-performance PCI Express riser that can convert a PCIE X1 slot to a PCIE X16 slot on the mother board. With more PCIE X16 graphic cards, it will give a safe and dependable connection. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs..
  • Stable solution: The 60cm USB 3.0 extension cable is soft and flexible, making it simple to position and route. The operating state is shown by three LED lights. The slot has a fixed buckle that makes it easy to remove and replace the graphics card without it falling out..
  • Simple extend PCI Express X1 slot from mother board to PCI Express X16 slot for heavy GPUs. Added fixed buckle on the PCI Express X16 slot ensure stable GPU connection..
  • Power Supply Options: While other PCIE has only 1 option for power connector which is 6 pin power connector. Dracaena Riser provides 3 different options which are 6pin, Molex and SATA.
  • 3 Solid Capacitors improve power stability to GPU and prevent interference. Coil unit added for absorbing electromagnetic wave.
Check Stock

SUOHUI Complete GPU Mining Rig Open-air Crypto Miner for Ethereum Mining Prebuilt 8 Slots Mining Motherboard,1800W PSU,4 Cooling Fans, 8GB RAM,128GB SSD, Win10 OS(Excluding GPU/1 Layer Miner)…

  • 【Professionally Installed and Test 】 This stackable miner is sturdy and durable with high-quality steel.Unique bottom plate not only for dust-proof and moisture-proof but also accelerate air convection and enhance heat dissipation. Fully protection for your GPUs and mining hardware..
  • 【8 GPU Mining Motherboard 】 Professional mining motherboard, designed for cryptocurrency mining. 8 NVIDIA or AMD graphics cards can be mixed use without additional GPU risers. 65mm spacing slot perfectly fits most GPUs and achieves high heat dissipation. Ensure better performance of GPU mining..
  • 【1800W Full Voltage Power Supply】 4U industrial control power supply, designed for GPU mining. The stable output of 1800W high power and conversion up to 90%. Available at 110V and 220V. 10 long-line power connection cables directly connect to the motherboard and GPUs. Reduce power loss and extend service life..
  • 【Ultra-quiet Controllable Cooling Fans】The mining machine has installed 4*4500 RPM silent GPU cooling fans and a fan speed controller. Controllable win speed allows accelerating airflow flexibility for optimal cooling. The professional mute design lets you easily enjoy the fun of mining at home..
  • 【Warmly Notes】: After receiving the miner, you need to conne....
Check Stock

Fanhasi 8 GPU Mining Rig Frame Case for ETH Crypto Miner with 8 GPU Mining Motherboard & 2000W Power Supply & 128GB SSD & 4G RAM & 8 Cooling Fans (Without GPU)

  • 8 GPU Slots Mining Rig System: Designed for Ethereum miner, you can put at most 8 Pcs GPU cards in the mining case. 65mm gap between each GPU ports gives the video cards enough space for air circulation for cooling. It's fit for most GPU card except 3060. NOTE: GPU cards are NOT Included.
  • 110V - 264V Input Power Supply: Built in 2000W PSU is designed for mining rig with up to 90% conversion efficiency. 110V - 264V universal AC input design allows you to enjoy mining at home easily. Without any modifying, it can work at a household voltage of 110V..
  • 8 Pcs Powerful Cooling Fans: This ETH mining rig case comes with 8 PCS adjustable cooling fans which help to accelerate air convection and keep the GPU card working at high performance. With the help of controller, you can control the fan speed to reduce the noise..
  • Case Type Mining Machine: The Ethereum miner case is made of high quality steel material which is sturdy and durable, can fully protect your GPU and electronic devices from damage. NOTE: GPU cards which are longer than 12.6 inch / 32cm in length are UNAVAILABLE for this mining rig..
  • Mining Rig Including: B75 motherboard, 2000W Supply Power (110V - 264V input ), CPU, 128GB mSATA SSD, 4G DDR3, 8 PCS 4500 RPM cooling fans. (NOTE: GPU cards are NOT Inc....
Check Stock