Top Hammer Crimp Tool

Morris 10817 Terminal Kit with Controlled Cycle Crimp Tool, 200-Piece

  • 200 Piece Terminal Kit with Controlled Cycle Crimp Tool - This Multi Piece Terminal Assortment has all the connectors, terminals and the Crimp Tool you'll need..
  • 22-10 Awg Ergonomic Controlled Cycle Crimp Tool.
  • Multi piece terminal assortment contains ring and spade terminals, butt connectors & male and female disconnects.
  • Terminals and Disconnects are cULus Listed.
Check Stock

IWISS Pex Crimping Tool 1/2-inch & 3/4-inch Copper Ring Heavy Duty Dual Size c/w Go/No-Go Gauge Meets ASTM F1807

  • Capability: IWS-1234P PEX Crimp Tool Kit works with 2 sizes of PEX tubing-1/2-inch and....
  • Compatibility:Copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands).Brass or Poly(PPSU) crimp s....
  • Users Manual Included: Contains information on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate t....
  • Calibration & Inspection: Tool calibrations are made easy with adjustable lock screws. The Crimp/Clamp Tools must be checked for cor....
  • Innovation: Tool includes a gadget helps to reshape the deformed 3/4” rings and cinch rings a little bit smaller to avoid rings from slipping off....
Check Stock

IWISS Deutsch Connector Crimping Tool Kit for Deutsch DT Connectors, Solid & Stamped Contacts, Delphi Weather Pack Crimper,Deutsch Pin Removal Tool Kit-12PCS

  • Automotive Harness Wiring Tool Kit: Ideal for pin & depin automotive electrical connectors like Weather Pack connectors, Deutsch Connectors, Molex connectors which are commonly found on cars, RVs, trucks, motorcycles, race cars and boats..
  • Deutsch Crimping Tools: IWD-16, IWD-12 & IWD-20 crimpers are designed for crimping Deutsch solid pins and sockets(Size 16, Size 12 & Size 20) to fit in Deutsch DT, DTP, DTM, HD10, Jiffy Splice connectors..
  • Weather Pack Crimping Tool: Delphi WeatherPack Crimper: IWC-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack connector lines. The crimpers are designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series..
  • Open Barrel Terminal Crimper： IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Pin Removal Tools: ET-01( DT-RT1) Deutsch wedgelock removal tool and depin tools for WeatherPack terminals, Deutsch DT, DTM, DTP connectors release terminals safely without damaging the vehicle wiring harness or terminal block..
Check Stock

IWISS Open Barrel Terminal Crimping Tool for Molex Style DELPHI AMP TYCO Deutsch Terminals Crimper, Molex Crimping Tool,24-14 AWG

  • Open Barrel Terminal Crimper: IWS-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Deutsch Stamped Contact Size 16 Crimp Tool: Designed for crimping Deutsch stamped pins and sockets, Size 16, AWG14 to AWG 18. Series: DT,HD30,HDP20,DRC,HD10,DRB,DTV.AEC,STRIKE,Jiffy Splice..
  • Two Step Crimping: Crimps conductor and insulation portion of contacts in separate cavities. Tool must be closed twice to complete termination..
  • B Profile Crimps: Insulation crimps are "B" type and are produced in two cavities.: 18-14 AWG and 24-20 AWG. Conductor crimps are "B" type and are produced in three cavities: 16-14 AWG, 20-18 AWG and 24-22 AWG..
  • IWS-1424A universal “U” Barrel Crimp Tool is perfect for 24 to 14 gauge wire used with AMP, Deutsch, Delphi or any other stamped terminal. A must when servicing any motorcycle. Made from high quality carbon steel with black oxide finish for corrosion resistance and durability..
Check Stock

HKS Spark Plug Connector Crimping Tool For Ignition Cable and Spark Plug Wire – Ratcheting Wire Crimpers – Max Diameter 8.5mm – Ratchet Terminal Crimper – Electrical Crimping Tool

  • Professional Crimper – This crimper features an efficient ratchet mechanism and finish-machined crimp die for a solid crimp. This crimping tool fits perfectly with spark plug terminals with a diameter of 8-8.5mm..
  • Precise Mechanics – The crimping process is accomplished by pressing the handle through a complete ratcheting cycle until the handle is automatically released. Due to the ratchet, you are able to secure the connector first and then insert the wire into the crimp..
  • Adjustable Crimp Force – The tool has a knob that adjusts the crimp strength to ensure the right crimp force for your project. Equipped with a quick release lever allows the crimper jaw to be opened in any position..
  • Ergonomic Handles – Ergonomic, cushioned, non-slip handles are designed to ensure a strong grip in all situations..
  • Crimp & Strip 2 in 1 – Suitable for single & dual spark plug crimp terminals.The crimper fits for the spark plug wire diameter of 8.5mm..
Check Stock

IWISS IWC-1424A Crimping Tools for Deutsch DT Series Stamped & Formed Contact, Open Barrel Terminal Crimping Tool, AWG14 to AWG24 Wire Crimper

  • Open Barrel Terminal Crimper: IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Deutsch Stamped Contact Size 16 Crimp Tool: IWC-1424A is also designed for crimping Deutsch stamped pins and sockets, Size 16, AWG14 to AWG 18. Series: DT,HD30,HDP20,DRC,HD10,DRB,DTV.AEC,STRIKE,Jiffy Splice..
  • Two Step Crimping: Crimps conductor and insulation portion of contacts in separate cavities. Tool must be closed twice to complete termination..
  • B Profile Crimps: Insulation crimps are "B" type and are produced in two cavities.: 18-14 AWG and 24-20 AWG. Conductor crimps are "B" type and are produced in three cavities: 16-14 AWG, 20-18 AWG and 24-22 AWG..
  • IWC-1424A universal “U” Barrel Crimp Tool is perfect for 24 to 14 gauge wire used with AMP, Deutsch, Delphi or any other stamped terminal. A must when servicing any motorcycle. Made from high quality carbon steel with black oxide finish for corrosion resistance and durability..
Check Stock

FLKQC Wood Gluing Pipe Clamp Set, Heavy Duty Cast Iron Quick Release Pipe Clamps for Woodworking (1, 1/2\)

  • This Pex crimping tool meets the ASTM 2098 standard. Pex Crimping Set works with stainless steel clamps from any manufacturer to make PEX connections from 3/8" to 1"..
  • Our Pex crimp tool/Plumbing tools/Pex cutter/Hose clamp tool has perfect polishing provides no damage during crimping and avoids leaking..
  • It’s easy to switch cinch. And the ratchet design and self-release mechanism will make the cinch easy. The pex fittings pipe tool is factory-adjusted with no requirement for calibration tool..
  • This is a 5 in 1 pex pipe tool that can be used to crimp 3/8, 1/2, 5/8, 3/4 & 1" inch Stainless clamps. No Adjustment on the pex tool is needed to switch sizes..
  • Package Includes: 1pc - Red handle Cinch Crimp tool, 1pc - Red handle pipe cutter, 20pcs 1/2" and 10 pcs 3/4" Clamps set, 1pc Storage Bag..
Check Stock

RJ45 Crimp Tool for Pass through and legacy connectorsProfessional High Performance Crimper Tool by Ethernet Connector for pass through and legacy connectors Bonus CAT6 Connector 20 Pack

  • FAST, RELIABLE modular-crimp connection for data and voice-over applications. Create clean, flush trim on RJ11/12 and RJ45 extended copper with our precision ground crimping dies??Ratcheted, high leverage and stable platform for consistent, repeatable terminations,Compatible with RJ45 Pass through connectors and regular RJ45 connectors.
  • VERSATILE electronics tool lets you cut, strip and crimp Ethernet and telephone cable. Compatible with all RJ45 CAT6/7 connectors (including shielded), RJ45 CAT5E connectors, and RJ11/12 connectors (not AMP). HARDENED STEEL construction is durable and delivers more torque during the crimping cycle. Die head assembly provides 360 degrees of connector support for terminating modular plugs on stranded or solid cable..
  • These RJ45 crimpers / crimp tool’s blade guard on cutting and stripping knives reduces risk of injury and helps maintain razor sharpness. Textured handle grips reduce hand fatigue and prevent slipping during cutting, stripping and crimping..
  • Long-lasting durability and easy use PETECHTOOL RJ45 Wire Crimping Tool is made of professional-grade heavy-duty steel so it delivers exceptional torque without bending. Expanded surface area on contact drivers delivers full uniform crimp force for fast, accurate ....
Check Stock

Zhushan Spark Plug Wire Crimping Tool Kit, Ratchet Spark Plug Crimper Diameter 8.5mm for Crimping and Stripping Plug, 24PCS 180 °/90 °/Straight Spark Plug Coil Terminals and 24PCS Terminals Boots

  • 【Spark Plug Crimp Tools】Spark Plug Crimp Tools are made of high quality steel, hardened and durable.
  • crimp spark plug wire terminals and strip 8.5mm spark plug wires, spark plug wire crimp tools are suitable for most types of connections.
  • 【Crimp Tool Kit Includes】1 x spark plug crimping tool ,180, 90 and 180 degree spark plug coil terminals with boots,8 of each type.
  • 【Adjustable Crimping Force】The tool is equipped with a star wheel, built-in thickened ratchet automatically adjusts to the appropriate to ensure proper crimping force. The quick release lever allows the crimping jaws to be opened at any position.
  • 【Spark Plug Coil Terminals】Spark plug coil terminals for 8mm wire. They are made of high-quality brass for good electrical conductivity, and the black rubber boots protect the terminals from dust and moisture.
  • 【Appication】Professional insulated wire terminal ratchet crimping tool can be used for home appliance repair, home circuit repair, car circuit connection, and everything about circuit connection.
Check Stock

Hydraulic Cable Crimper and Swage Tool. Great for Crimping Battery Lugs, Large Electric Cables or Swaging Stainless Steel Cable/Rope.

  • Can crimp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job done..
  • Great to swage stainless steel wire/rope up to 1/8th inch. Although our test show it will crimp 3/16th we do not warranty it for use on 3/16th but we always accept returns in the first 45 days. Easily make a wire rail fence around the deck, yard, or install new rigging in your boat. Anytime you're installing new steel cable this does the job with less effort..
  • Hydraulic tools allow for way more force from a much smaller package. It requires a 36" mechanical crimper/swage tool to compare to the force this tool generates. Imagine trying to crimp a battery terminal under the hood with one of those. Trust us this is better..
  • Our kit includes 8 different size die heads, these can be adjusted 180° to help accommodate tight spaces. Please note this tool requires very little effort to crimp. During our testing we had a lot of over-crimping. It should never feel like the crimp has to be forced. Especially important on the 00 electric or the 3/16th stainless.....
Check Stock

IWISS PEX Crimping Tool Combo1/2-inch 3/4-inch Plumbing Tool Copper Crimp Ring with Go/No-Go Gauge Conforms to ASTM F1807 Standards

  • Built-in Dual Jaw: IWS-1234PS copper ring crimp tool with built-in 1/2”&3/4'' well-polished jaw, Go/No-Go gauge,and instruction manual on how to....
  • Purpose: IWS-1234PS F1807 PEX crimp tool is designed to compress copper crimp rings to secure PEX or PE-RT tubing to brass or poly crimp fittings.
  • Capacity: Works with 2 major sizes of PEX tubing - 1/2" and 3/4" Factory calibrated and meets ASTM F-1807 standard.
  • Compatibility: Copper crimp rings (Sioux Chief, Watts, Nibco and other brands). Brass or Poly crimp style PEX fittings. All types and brands of PEX....
  • Smooth actuation mechanism allows secure connections with minimal force required. Hardened steel construction ensures reliability and durability.
Check Stock

RIDGID 43853 1/2-Inch ASTM F 1807 Close Quarters Manual PEX Crimp Tool

  • This is a tool intended for use with Crimp ring pex pipe installations.
  • The Sharkbite pex Crimp tool compresses small Copper Crimp bands to secure tubing with pex barb fittings.
  • This product is available in a range of sizes to fit various installation needs.
Check Stock