Top Head Gaskets

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

260-1000 Small block Chevy overhaul gasket set & head Bolts kit compatible with 1955-79 283 327 350 SB Chevy's

  • Features composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.
  • Great deal with this combined gasket set.
  • Save time and money getting multiple gaskets in one convenient part #.
  • The head gaskets in this set measure approximately .070″ thick before installation.
Check Stock

ASTOU Cylinder Head Gasket Sets for Saab for 9-2X Head Gasket Kit for Subaru for Legacy GT 2.5L HS26415PT-1

  • ❤GASKET SET INTERCHANGE PART NUMBER – HS26415PT-1, HS26170PT-1.
  • ❤GASKET SET SPECIFICATIONS – Our seals and gaskets are designed to meet or exceed all original equipment (OE) specifications for proper sealing, stabilize engine efficiency and increase driving comfort..
  • ❤GASKET SET FUNCTION – The cylinder head gasket set is an important component of the engine combustion chamber. They are fitted between the engine block and the cylinder head. The function of the cylinder head gaskets is to prevent engine coolant or engine oil from entering the cylinder while ensuring maximum compression..
  • ❤GASKET SET FEATURES – Our gaskets are designed to save customers money and time by providing accurate gaskets. The gasket has a non-viscous hard-wearing layer and good sealing innovation and technology to ensure that it can withstand the harsh conditions of the engine compartment and maintain the best operation..
  • ❤SUGGESTION – Please confirm whether the model is suitable before purchase. It is recommended to be installed by professionals. Package Includes: as shown in the figure..
Check Stock

LIMICAR Valve Cover Gasket & Grommets Kit For 2000 2001 2002 2003 Dodge Dakota Durango 1999 2000 2001 2002 2003 Grand Cherokee 2002 2003 Dodge Ram 1500 4.7L V8 VS50521R

  • ...003 Dodge Dakota Durango 4.7L SOHC 16 Valve V8 Vin N 1999 2000 2001 2002 2003 Grand Cherokee 4.7L SOHC 16 Valve V8 VIN J N 2002 2003 Dodge Ram 1500 Pickup 4.7L SOHC 16 Valve V8 VIN N.
  • SPECIFICS: LIMICAR can offer an extensive line of OE-quality ready for installation. Valve cover gaskets are the most common leak repair product.LIMICAR Head Gasket prevents liquids and gases from escaping into adjacent cylinders and the surrounding oil and coolant galleries.The purpose is to seal the cylinders to ensure maximum compression and avoid leakage of coolant or engine oil into the cylinders..
  • FUNCTION: LIMICAR Head Gasket systems can withstand high pressures, high temperatures and aggressive media of a car. Head Sets give technicians not only the gaskets the project requires, but the very best technology available.Cylinder head gaskets also act as a force transmission element. LIMICAR give technicians not only the gaskets the project requires, but the very best technology available..
  • NOTICE: Please check the description and compatibility chart before your purchasing. All the products have been inspected before sending out. Instruction is not included. Professional installation is highly recommended. Any questions, please feel....
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Finish 1 4.1 VOC Gray Enamel Sealer Undercoat (Gallon)

  • Fast-drying, metallic copper sealant that helps dissipate heat.
  • Prevents gasket burnout and improves heat transfer.
  • Resists all types of automotive fluids, especially gasoline.
  • Typical applications include cylinder head gaskets, carburetor gaskets, exhaust manifold gaskets and other high temperature applications.
Check Stock

Loctite 37464 Grey RTV 598 High Performance Silicone. 80 ml.

  • Fast-drying, metallic copper sealant that helps dissipate heat.
  • Prevents gasket burnout and improves heat transfer.
  • Resists all types of automotive fluids, especially gasoline.
  • Typical applications include cylinder head gaskets, carburetor gaskets, exhaust manifold gaskets and other high temperature applications.
Check Stock

Ford Racing M-6067-3V46 Head Changing Kit for 4.6L 3V Engine

  • Fits 3-Valve 4.6L modular engine with standard 90.2mm bore and 3-valve head....
  • Kit includes multi-layer steel head gaskets and high-strength torque-to-yield head boltsOver the years, racing has become big business for teams, sponsors, and manufacturers around the world. However, "grassroots" motorsports remain at the core of Ford's DNA. Grassroots performance began with Ford and has become a part of American culture. The Model A is the most modified car in history, and enthusiasts the world over continue to embrace Ford, Mercury, and Lincoln cars and trucks from the....
Check Stock

Tusk Top End Gasket Kit For HONDA TRX 400EX 1999-2008

  • See fitment guide image for additional Machines this item fits. Tusk Top End Gaskets are made from the highest quality materials available..
  • Kits come complete with head and base gaskets and other necessary gaskets and parts to rebuild the top end on your motorcycle or ATV..
Check Stock

KIPA Head Gasket Set for Impreza WRX EJ205 2.0 Turbo Replace OE Part # 11044AA483 Pack-2 Durable

  • Kipa Head gasket is multi-layered steel. Gaskets have been shown to hold up under extensive boost pressures and high temperatures..
  • Fitment: Replace for Subaru Impreza WRX Dohc EJ205 2.0 Turbo 2002-2005.
  • MPN: Replace for OE Part Number # 11044AA483 11044-AA483.
  • Direct aftermarekt Head Gasket. Which means that this is the factory issued head gasket that came equipped with your engine as soon as it rolled off....
  • If you are replacing your head gaskets, then you will have the comfort of knowing that you are using a proven product that will deliver the....
Check Stock

CNS MLS Head Gasket Set Compatible with 99-05 SAAB/Subaru 2.5L 2458CC H4 SOHC 16 Valve EJ25

  • COMPATIBLE WITH: 99 - 05 SAAB / SUBARU 2.5L 2458CC H4 SOHC, (16 Valve), "EJ25".
  • Upper Intake Manifold Gaskets (Plenum Gaskets) are "NOT" Included.
Check Stock

Partman Replacement Wisconsin TE, TF, TH, TJ, V4, VD4, VE4, VE4D, VF4, VF4D, VH4, VH4D Cylinder Head Gasket Set Q28B, Q29A, Q28, Q29, Q28A

  • ★Condition – 100% brand-new, never ever been utilized, all parts are tested and quality controlled prior to shipment.
  • ★Fitment -fit for a Wisconsin VE4 VE4D VF4 VF4D VH4 VH4D or W4-1770 engine. Contains head, manifold and valve cover gaskets..
  • ★Feature – Kits come complete with head and base gaskets and other necessary gaskets and parts to rebuild your engine.
  • ★Made with top quality materials for maximum durability and leak prevention..
  • ★Package including – 1X Complete Engine Gaskets Kit Set as images show.
Check Stock