Top Heavy duty Flaring And Swaging Tool

Flexzion Flaring & Swaging Tool Kit 45 Degree Tubing 1/8 to 3/4 inch for Soft Copper Tube Extrusion Type Water Gas Line Automotive Plumbing 14 Pieces Cone with Portable Carring Case

  • Copper tubing flaring + swaging kit in a combination tubing flaring./swaging kit to fit all your needs.
  • For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing.
  • The 45 degree cone for flare. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation.
  • Self centering, slip-on forged steel yoke. All in a hand carrying plastic case red color box.
Check Stock

Prima Causa HVAC Flaring and Swaging Tool Kit Flares Soft Refrigeration Copper Pipe with Tubing Cutter & Ratchet Wrench

  • Easy operation, save time and energy. Versatile tool kit in a combination tubing flaring and swaging to fit all your needs.
  • For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.....
  • The special cone eccentric revolution allows the internal opening gradually and accurate from 45° and regual flare without effor, preventing tube....
  • Eccentric cone will be rebound automatically after the work is finished, make the idle top head in revolution again for 1-2 times and have the flare....
  • Flaring tool kit is supplied in a Blow Mold Case.
Check Stock

Bonvoisin Hydraulic Tubing Expander Flaring Tool 2 in 1 Swaging Tool Kit 3/16’’-7/8’’ Copper Pipe Expanding 45° Flare Tool with Tubing Cutter 6 Dies for HVAC Air Conditioner Refrigerator Repair

  • [Expanding & Flaring 2 in 1] - This hydraulic swaging tool kit can be used for flaring and expanding of copper pipes, which can meet your maintenance....
  • [Parameters] - Suitable for 12 different pipe diameters: Φ3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 6mm, 10mm, 12mm, 22mm.....
  • [High Efficient & Portable] - Compared with manual flaring tools, hydraulic type is more time-saving, labor-saving and more efficient. The thickened....
  • [Wide Application] - This repair tool is applicable to soft copper / aluminum pipes, and widely used in the maintenance of HVAC, refrigerators, air....
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the product, you can replace it for free..
Check Stock

SeonFook 6 PCS Swaging Tool Drill Bit Set 1/4-Inch Hex Shank HVAC Tool Copper Pipe Flaring Bits Portable Tube Expander Drill Bit Repairing Kit 1/4 3/8 1/2 5/8 3/4 7/8

  • 【Swaging Tools】 Come with 6 different sizes: 7/8'', 3/4", 5/8", 1/2", 3/8", 1/4".
  • Hex Shank Diameter: 1/4 inch. They can meet your various work....
  • 【Flaring Bit Set】Made of high quality bearing steel for durability and long life. Flares drill bits have high and uniform hardness and wear....
  • 【Pipe Expander】The innovative drill bit expander for expanding tubes using heat by friction way more surface of between the flare and the Valve.....
  • 【Copper Pipe Swaging Tool】When air conditioning is installed, expand copper tube, make two copper tube mutual link (The drill bit is installed on....
  • 【Drill Bit Expander】This swages tool present a perfect depth and a tight fitting, which will make the brazing easier, reducing the fatigue stress....
Check Stock

YELLOW JACKET 60430 Lightweight Swaging/Flaring Tool 6 Positions

  • Six quick-change positions for flaring soft chopper and aluminum tube.
  • The chrome finish of the swaging pins allows for an easy swaging operation.
  • Strong aluminum bars – each hole flare tested more than 1000 times.
  • Swage pin sizes are molded into the case for easy organization and differentiation.
  • Quick connect feature on lightweight yoke saves time during pin/cone changing.
Check Stock

Saipe 5 Pcs Swaging Tool Drill Bit Set 1/4 Inch Hex Shank Copper Pipe Flaring Tool Tube Expander Air Conditioner Copper Pipe Swaging Flaring Tool for Copper Tubing 1/4 3/8 1/2 5/8 3/4

  • 【Swage Drill Bit Set】Size: 1/4'' (6.35mm), 3/8'' (9.5mm), 1/2'' (12.7mm), 5/8'' (15.9mm), 3/4'' (19mm). Total Length: 50/54/57/60/63mm. Shank....
  • 【Tube Expander】Suitable for【Tube Expander】Suitable for hard and soft copper standardized, easy to braze swaging set. Come with 5 different....
  • 【Durable For Use】Made of high quality bearing steel for high and uniform hardness and wear resistance. High elastic limit for good performance and....
  • 【Swaging Tool】When installing the air conditioner, use a pipe expander to widen the copper pipe, so that the two copper pipes can be accurately....
  • 【Easy to Use】Just need to install it on the electric hand drill to use. Flaring tool drill bit set are small in size, so you can take it with you....
Check Stock

4LIFETIMELINES Flaring Tool – Professional Turret Brake Line Flare Tool – 5 Tubing Sizes – Compatible with Stainless Steel Copper Coils

  • 5 TUBING SIZES: The 4LIFETIMELINES heavy duty turret brake line flare tool allows you to create 45 degree highly precise double, single and bubble flares in 5 sizes of tubing, 3/16″, 1/4″, 5/16″, 3/8″ and 4.75mm..
  • COMPATIBLE MATERIALS: This brake flaring tool can work with stainless steel, steel and nickel copper tubing, being a smart and practical solution for brake lines, fuel lines and transmission cooler lines..
  • EASY TO USE: Unlike similar products on the market, this professional flaring tool features a quick-release T handle ensuring fast holder die changeovers for a smooth and user-friendly experience..
  • CONVENIENT TURRET CARRIER: Keep all your dies ready, available and within immediate reach with the convenient turret carrier, which saves you the hassle of groping for small parts or losing them!.
  • PRECISION IS KEY: Keep your brake flares and brake system safe and at optimal length with this highly precise and accurate flaring tool, which requires minimal time, effort and cost!.
Check Stock

Wostore Double Flare Tool Adapters 7 Pcs 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 Inch Tube Expander Flaring

  • The kit includes 7 PCS flaring adapters..
  • Flaring tool adapters apply to 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" O.D.tubing..
  • Designed to use when flaring double flare in copper, aluminum, magnesium,and brass tubing as well as soft steel brake line tubing..
  • Multiple size options,meets almost all your flare needs..
Check Stock

ABN Bubble Flare Tool & Double Flaring Kit – Tubing Bender Flare Tool & Pipe Cutter (1/8in to 5/8in / 3-16mm)

  • MAKE DOUBLE & BUBBLE FLARES: The ABN Double Flare Kit & Bubble Flaring Tool create flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more.
  • Fixed head and angles make clean, precise flares.
  • Yoke type compressor with T-bar handle for firm grip.
  • For 3/16″, 1/4″, 5/16″, 3/8″, 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing.
  • QUICK & PRECISE CUTS: Use the included small pipe cutter to cut 1/8-inch to 5/8-inch (3-16mm) steel, aluminum, and copper tubing.
  • Pull back the blade and revolve the pipe while compressing.
  • 2 rollers prevent skipping and jumping for most consistent tracking.
  • Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut.
  • BUILT TO LAST: Swivel constructed from chrome-plated alloy steel to reduce friction.
  • Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion.
  • EASY STORAGE: Heavy-duty 11.9” x 2.8” x 9.2” inch (30.2cm x 7.1cm x 23.4cm) plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization.
  • Includes double flaring and bubble flaring instruct....
Check Stock

Rustark 14Pcs Double Flares Adapters Tool Kit Replacement Head Fit 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 Inch OD Tubing Expander Double Flaring Tool for Tubing Expander Flaring Replacement

  • ★1.【What You Get】 — We have prepared you with 14pcs double flaring adapters kit in a variety of sizes for your choice, measures 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″ and 5/8″ O.D. tubing, Each size come in 2 pieces. Full range of sizes is convenient for you to choose the appropriate one for your projects..
  • ★2.【Premium Quality】— Made of heavy duty alloy steel material, sturdy and tough, these flaring tool adapters are heat treated for greater durability and excellent performance, which will last for a long time. Besides, the surface is clearly marked the size for quick and easy identification..
  • ★3.【Precise Design】 — Our flaring adapters are precise in size, and have no burr that is easy to fit the compatible flaring tools. It is convenient for you to choose the right size that fit for your specific needs. Give them a try!.
  • ★4.【Widely Used】These flaring adapters are great for brake line, fuel line, air condition and refrigeration repair applications. Widely applied when flaring in copper, aluminum, magnesium, and brass tubing as well as soft steel brake line tubing..
  • ★5.【After-Sale Service】 – If you have any questions about our products or any problems with your packages, please feel free to contact us. ....
Check Stock

Durable Universal Hydraulic Pipe Expander Fuel Line Flaring Tool Set Dilator Scraper Cutter Hole Splint

  • Expanding & Flaring Functions: This hydraulic flare tool features 2-in-1 tube expanding and flaring functions with eight expanding dies(3/16", 1/4",....
  • Manual Hydraulic Mechanism: This flaring tool set achieves the pipe expanding and flaring with a hydraulic mechanism. The hydraulic tool is designed....
  • Pipe Cutting & Deburring: This flaring tool comes with one pipe cutter and one deburring tool, both of which are easy to use with the handwheel....
  • Durability & Portability: The flaring tool is made of durable hardened steel, which is reliable and built to last, saving your money. Besides, the....
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding and flaring soft metal tubing and piping, such as copper and aluminum....
Check Stock

Mophorn Hydraulic Flaring Tool Kit with Tube Cutter Flare Tool Kit Deburrer Fuel Line 8PCS Swage Adapter Flaring Tool Kit for 3/16 to 7/8 Inch

  • Expanding & Flaring Functions: This hydraulic flare tool features 2-in-1 tube expanding and flaring functions with eight expanding dies(3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″) and one flaring cone for 5-22 mm tubes. It is compatible with a single expanding die only, but it can satisfy your needs easily and efficiently..
  • Manual Hydraulic Mechanism: This flaring tool set achieves the pipe expanding and flaring with a hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as non-slip PVC handles and no-leakage oil cylinder, to serve you well. You can easily operate this tool with no fatigue..
  • Pipe Cutting & Deburring: This flaring tool comes with one pipe cutter and one deburring tool, both of which are easy to use with the handwheel design. The pipe cutter cuts the pipes quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing..
  • Durability & Portability: The flaring tool is made of durable hardened steel, which is reliable and built to last, saving your money. Besides, the flaring tool kit is stored in a plastic toolbox that is not easily broken, reducing the possibility of missing parts. It is compact and easy to carry..
Check Stock