Top Helical Cutting

SVBONY SV106 Guide Scope with Helical Focuser Finder and Guide Scope Multi-Use for Astronomical Telescope 50mm

  • 50mm Guide scope will help guide you to capturing higher quality astrophotos. with its 50mm lens and smooth helical focuser, the versatile 50mm multi-use guide scope with helical focuser is an ideal addition to any astrophotographers collection of gear.
  • Multi-use guide scope with helical focuser features a built-in helical focuser that allows precise focus adjustments with zero flexure for rigid performance. obtaining a clear, sharply focused view of potential guide stars is quick and easy with this sturdy scope.
  • High power guide scope features a machined, knurled ring to make fine focus adjustments nice and easy, while a thumbscrew lets you lock-down the focuser in-place once adjustments are complete. the focuser boasts 8 mm of precise helical focus travel, plus telescoping drawtube housing provides up to 30 mm of additional back-travel if needed for your particular autoguider device.
  • This complete guide scope comes with two heavy-duty guide scope rings and a 3.5" long, 1.18"wide dovetail mounting bar, which is compatible with dovetail finder scope bases for easy attachment. the dovetail bar features five threaded through-sockets for versatile attachment options. the included guide scope rings feature six metal thumbscrews for precise aiming.
Check Stock

OSCARBIDE 15mm Square Carbide Inserts Cutters 15 x15 x2.5-R150 Replacement Insert Cutter 6”Radius Face for Woodworking Spiral/Helical Planer Cutter Head Wood Turning Tool 10pcs

  • Carbide Cutter size: 15mmx15mmx2.5mm,4-indexable cutting edge,30* Cutting bevel, With 150mm Radius and 4 Radius Corners,polished to a mirror finish....
  • Made of Tungstern Carbide, more endurable ,for long time using..
  • This replacement carbide inserts are specifically designed to fit Titan Spiral Shear Heads for surfacing/planing cutterhead,groovers,helical head etc.
  • Each individual cutter insert is sharpened on four sides, all of the 4 edges can be rotated to expose a new cutting edge when dull or chipped..
  • Carbide inserts were sold in boxes of 10,packed with a plastic container for safe and easy storage..
Check Stock

Walton 10124 #12, 4 Flute Tap Extractor With Square Shank

  • For helical coil wire screw thread insert taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

Powermatic 209HH, 20-Inch Planer, Helical Cutterhead, 5HP, 3Ph 230/460V (1791316)

  • TWO-SPEED OIL BATH GEARBOX: Transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM..
  • HELICAL CUTTERHEAD WITH 100 FOUR-SIDED CARBIDE INSERTS: Smoother, quieter cutting and finer finish than conventional knives..
  • DUST CHUTE WITH 5" PORT: Provides efficient chip and dust collection..
  • CHIP BREAKER AND PRESSURE BAR: Assists to reduce snipe..
Check Stock

JET JWP-208-1, 20-Inch Planer, 4 HSS Knives, 3HP, 1Ph 230V (708528)

  • TWO-SPEED OIL BATH GEARBOX: Transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM..
  • HELICAL CUTTERHEAD WITH 100 FOUR-SIDED CARBIDE INSERTS: Smoother, quieter cutting and finer finish than conventional knives..
  • DUST CHUTE WITH 5" PORT: Provides efficient chip and dust collection..
  • CHIP BREAKER AND PRESSURE BAR: Assists to reduce snipe..
Check Stock

Powermatic 201HH, 22-Inch Planer, Helical Head, 7.5HP, 1Ph 230V (1791267)

  • HELICAL CUTTERHEAD WITH 125 FOUR-SIDED CARBIDE INSERTS: Smoother, quieter cutting and finer finish than conventional knives..
  • accommodates rough and fine finish work..
  • INFEED ROLLER AND CHIP BREAKER: Specially designed to allow multiple boards to be planed at the same..
  • DUST CHUTE WITH 5" PORT: Provides efficient chip and dust collection..
  • ROLLER BEARING-MOUNTED FEED ROLLERS: For smooth operation and long life..
Check Stock

Powermatic 201HH, 22-Inch Planer, Helical Head, 7-1/2HP, 3Ph 230V (1791268)

  • HELICAL CUTTERHEAD WITH 125 FOUR-SIDED CARBIDE INSERTS: Smoother, quieter cutting and finer finish than conventional knives..
  • accommodates rough and fine finish work..
  • INFEED ROLLER AND CHIP BREAKER: Specially designed to allow multiple boards to be planed at the same..
  • DUST CHUTE WITH 5" PORT: Provides efficient chip and dust collection..
  • ROLLER BEARING-MOUNTED FEED ROLLERS: For smooth operation and long life..
Check Stock

Indexable Carbide Insert Knife 14.3x14.3x2.0mm-50° 2-Edge Replacement Cutter for Cutech Tool Rikon Carbatec and Most Planer Jointer Helical Cutterheads, 10 Packs

  • Standard Cutter Size: 14.3mm square with straight corners 2mm thick,2 indexable cutting edges, 50 degree cutting bevel. Inserts are used on planers/jointers with helical cutterheads..
  • Made of Premium K10 grade solid tungsten carbide, double life-time than general carbide cutters, and had been increased 30% hardness by our high temperature quenching..
  • Each cutter has 2 indexable sharp edges, if one is dull, no more sharpening, just turn to another edge which greatly reduces you down time. The right geometry or cutting angle is ground to the produce an edge the cuts cleanly and safely..
  • The inserts had been high precision polished, which increased the oxidation resistance and corrosion resistance of the cutter, combined with optimal grinding process to produce the flattest and truest cutting surfaces..
  • What You Get: Pack of 10 14.3 x 14.3 x 2mm square straight replacement carbide cutters, 10 pcs of professional M6 screws, our worry-free 12-month warranty, and friendly customer service. TJATSE committed to give Best Selection for your woodworking job..
Check Stock

Grizzly Industrial G0555LX - 14 1 HP Deluxe Bandsaw

  • RIKON BENCHTOP JOINTER - This 6” becnhtop jointer has a 6 row helical-style cutter head with 12 HSS, 2-insert cutters for super cutting action..
  • HIGH SPEED - With a powerful 10 AMP motor, this benchtop jointer also features a high speed steel insert knives and a large 30” x6-3/16” table..
  • ALL STEEL CONSTRUCTION - Made from rigid, all-metal construction, machined aluminum tables, a quick depth setting mechanism with scale, adjustable....
  • SEE RESULTS - This benchtop jointer also has a spring loaded safety guard and a front on/off switch. You will see results when using this benchtop....
Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

T-Slot Milling Cutters 5mm Depth 35mm Cutting Dia 8 Flutes HSS Shank Diameter 16mm T Slot End Mill High Speed Steel Keyway Knife for Shallow Groove Processing On The Side.

  • Uses: Used To Process T-Shaped Grooves On Various Mechanical Tables Or Other Structures..
  • Features: It Is A Special Tool For Processing T-Slots. The End Edge Of The Milling Cutter Has A Suitable Cutting Angle. The Cutter Teeth Are Designed According To Helical And Staggered Teeth, And The Cutting Is Stable And The Cutting Force Is Small..
  • Precision: After The Straight Slot Is Milled, The T-Slot With The Required Precision Can Be Milled At One Time..
  • It Has High Strength And Is Not Easy To Break And Damage..
  • It Has Sufficient Hardness, Can Easily Cut Into The Workpiece, Has High Wear Resistance, And Prolongs The Service Life..
Check Stock

RIKON Power Tools Jointer with Helical Head

  • RIKON BENCHTOP JOINTER - This 6” becnhtop jointer has a 6 row helical-style cutter head with 12 HSS, 2-insert cutters for super cutting action..
  • HIGH SPEED - With a powerful 10 AMP motor, this benchtop jointer also features a high speed steel insert knives and a large 30” x6-3/16” table..
  • ALL STEEL CONSTRUCTION - Made from rigid, all-metal construction, machined aluminum tables, a quick depth setting mechanism with scale, adjustable fence that tilts from 90 degrees to 45 degrees quickly and accurately..
  • SEE RESULTS - This benchtop jointer also has a spring loaded safety guard and a front on/off switch. You will see results when using this benchtop jointer..
Check Stock