Top Hex Threaded Insert Tool

40Pcs Anwenk 1/4"-20 x 20mm Furniture Screw in Nut Threaded Wood Inserts Bolt Fastener Connector Hex Socket Drive for Wood Furniture Assortment (with Hex Spanner)

  • Material: High quality carbon steel with high hardness. These furniture screws are wear-resistant and very durable to use. Standard internal hex socket type without burr and non-slip design..
  • Applications:These furniture screws are suitable for furniture hardwood/ solid wood, for furniture combinations..
  • 40pieces Pack of Furniture Screws Threaded Inserts for Wood Furniture.1/4″-20x20mm screw type. Comes with 6mm Hex Spanner..
  • Usage: Pre-drill /drill a well-sized hole (Suggest that the diameter of the hole is 9.6 +/- 0.2mm, the length is about 23mm), then use a proper 6mm internal hex tool to screw in. Tip: If the furniture wood is with high-hardness, please enlarge the screw hole..
  • Size: Internal Thread Insert Type: 1/4″-20, External Diameter: 10.5mm, Total Length: 20mm. (1/4″-20x20mm).
Check Stock

50pcs M6 x 1.0 x 3D Length Threaded Inserts Wire Thread Inserts Steel Sheath Helicoil Type Screw Repair Sleeve Assortment Set

  • Have High Hardness and Corrosion-Ressistance, More Sturdy and Durable For Long Term Service.
  • Wide Use: For Wood Inserts, Bolt Fastener Connector and Furniture Screw in Nut Threaded,.
  • Includes : 40pcs Nuts Insert, 1pcs 6mm Hex Tool.
Check Stock

50pcs 1/4-20 Threaded Insert for Wood Furniture Insert Nuts Screw in Nuts 3/5\ Length

  • Pack of 50 Hex Drive 1/4-20 Threads x 3/5" Length Threaded Insert Wood Insert Nuts Furniture Screw in Nut..
  • Threaded insert head diameter: 0.461" / 11.7mm, body diameter: 0.315" / 8mm, threads diameter: 0.410" / 10.4mm..
  • 1/4-20 Insert nut goes into a predrilled hole in wood and has internal threads, the Screw-In insert offers a strong permanent thread for wood..
  • In Soft wood, recommended drill bits are 8.5mm, 9mm, 3/8 inch, (As best practice varies between applications, you should decide the proper drill bit yourself according to the hardness of your material.).
  • In Hard wood such as white oak or maple, recommended drill bits are 3/8 inch, 9.5mm, 10mm, (As best practice varies between applications, you should decide the proper drill bit yourself according to the hardness of your material.).
Check Stock

6 Pieces 8/32 Inch M4 12 Inch Threaded Rod with Hex Nuts Set Includes 6 Pcs M4 x 300 mm 304 Stainless Steel Fully Threads Studs Rods and 6 Pcs Thread Hex Nuts for Beaded Garden Stake Rods

  • What You Will Get: the package comes with 6 pieces of 8/32 inch M4 12 inch threaded rods and 6 pieces of M4 hex nuts, 12 pieces or 6 set in total, nice combinations for you to make 6 pieces of fairy garden stakes, as well as other DIY crafts.
  • Detailed Size: threaded studs: thread diameter is M4, and measures approx. 300 mm/ 12 inch in fully length.
  • Hex nut: the coarse thread diameter is M4, pitch: 0.7 mm/ 0.03 inches, flat across width: 7 mm/ 0.28 inch and about 2.8 mm/ 0.11 inch high.
  • Threaded Rods Studs: the threaded steel rod is made of quality 304 stainless steel material, sturdy, and resistant to rust or corrosion, with strong construction, hard to deform or break, which can be applied for a long time, and ideal accessories for assembly fastening, just screw into the threaded nut or threaded hole.
  • Hex Nut: the hex nut can be screwed to this threaded rod well, not easy to slip off, besides, it is also an ideal accessory for fasteners, it is also essential in daily life, just need to screw it to the thread metal rods, bolts and other tools of the same size are fine.
Check Stock

1/4-20, 5/16-18, 3/8-16 Threaded Inserts, Wood Inserts, Steel Threaded Inserts for Wood Furniture Screw, HELIFOUNER 143 Pieces 1/4'-20, 5/16'-18, 3/8'-16 Threaded Inserts Kit with Hex Wrench

  • 【Detailed Dimensions】1/4″-20 x 10mm/15mm/20mm/25mm, 5/16″-18 x 13mm/15mm/20mm/25mm, 3/8″-16 x 20mm/25mm, 10 sizes commonly used threaded inserts in a plastic case, different sizes can satisfy your different needs, coarse thread, fit standard 1/4 20 screws bolts and 5/16 18 screws bolts perfectly..
  • 【Color Zinc Plated Steel】Made of high quality carbon steel, color zinc plated on the surface which have good corrosion resistance in bad environment like high temperature, high hardness and perfect wear resistance, standard internal hex socket, without burr, smooth, non-slip, which can ensure long time using..
  • 【Easy To Install】You can drill a hole by using a 9.5mm /12mm /15mm drill bit, ensure a precise 90 degree angle for inserting the threaded inserts, then you need to screw the inserts into the 9.5mm /12mm /15mm holes by using our hex wrench. Make sure you countersink the hole to head size before you insert the threaded sleeve, fit standard 1/4 20, 5/16 18, 3/8 16 screws bolts perfectly..
  • 【Threaded Inserts Assortment Kit】Total 143 pieces 10 sizes threaded inserts are packed in a durable transparent box with label for you. It is easy to distinguish the size of the product, you can choose the suitable one to use in your wood furniture. O....
Check Stock

15 Pcs Thread Inserts M14x1.5 Female Thread Repairing Accessory Assortment Kit Drill Helicoil Repair Kit

  • ...as aluminum alloy to form a standard internal thread with high strength, wear resistance and high precision. Typical applications: high voltage switchgear, microwave communication, automotive parts, air separation equipment, radiators, etc..
  • Cost effective thoughtful kit: The use of wire screw sleeves for mm ---inch threaded hole conversion is convenient and fast. The imported equipment or mechanical inch thread is damaged, and it needs to be changed to mm thread due to the supply of spare parts.
  • All accessories are integrated in a box for convenient transportation and carriage..
  • Definitely recommend: Thread helical coil repair tool kit is ideal for restoring damaged threads, suitable for engine repair and otherautomotive applications for steel, cast Iron and aluminium. This kit helps create a stronger internal thread in soft metals and protects tapped threads against wear and damage..
Check Stock

PGMJ 80 Pieces 1/4\-20 Wood Inserts Bolt Furniture Screw in Nut Threaded Fastener Connector Hex Socket Drive for Wood Furniture Assortment (1/4\-20 x15mm)

  • 80 pieces 1/4"-20 furniture screws threaded inserts for wood furniture. Comes with 9.0 mm white steel twist drill and 6mm hex spanner..
  • Internal thread insert type: 1/4"-20, it is not a metric nut, the thread inside the nut is different, match this type when selecting accessories.
  • Material: High hardness and high quality carbon steel.
  • Usage: Use the matching bit pre-drill /drill a well-sized hole (depth is 1-2mm longer than furniture screw), then use a proper 6mm internal hex tool to screw in. Tip: If the furniture wood is with high-hardness, please enlarge the screw hole..
  • Applications:These furniture screws are wear-resistant and very durable to use. Suitable for furniture hardwood/ solid wood, for furniture combinations..
Check Stock

40 Pack Threaded Insert Nutsert, 1/4\-20 x 15mm Screw in Nut Threaded Wood Inserts, for Wood Furniture(with 1/4\ Allen Wrench)

  • Size: Insert head diameter: 0.445" (11.3mm), body diameter: 0.315"(8mm), threads diameter: 0.410"(10.4mm),1/4-20 threaded insert length: 0.591"(15mm).
  • Material: High quality carbon steel with high hardness, can keep a long-lasting hold..
  • Application: These furniture screws are suitable for wood furniture, hardwood or solid wood, such as furniture combinations(Threaded inserts are used to drill the right size hole and Install with hex key provided, and screw in nut connector screws)..
  • Recommended drill bit for wood: For Soft Wood-- 3/8" (8.5mm/9mm)dirll bit in soft wood, the threads cut will easily go into the wood.
  • For Hard Wood-- 3/8" (10mm),pls drill a hole that close to the outside threads diameter.If the hole is too small, Screwing it may split the wood or insert. If you are not sure the harness of the wood material, pls drill a proper sized hole for test before installing it..
  • Package included: 40 *1/4-20 Threaded Insert Nutsert + 1*1/4"(6mm) Allen Wrench..
Check Stock

VIVOHOME 45mm Portable Spinning Dance Stripping Pole for Home Fitness Black

  • PREMIUM MATERIAL - Made of premium chrome steel material that is durable and resists rust and corrosion.
  • The seamless surface is extremely smooth so you will not get scratched or hurt when using it.
  • User-friendly design allows you to use it for daily workouts.
  • ADJUSTABLE HEIGHT - A threaded rod is built into the main pole.
  • Simply insert the fixing rod and rotate it into place.
  • The threaded rod allows you to extend or contract the pole to fit it into any space.
  • Also comes with 2 extension poles to extend the length from 88” to 108”.
  • 2 USING MODES - There are 2 different modes (static mode/ spinning mode) designed to meet your different needs.
  • Simply use a Hex key to tighten the pole and keep it from spinning.
  • Easy to choose the suitable style that works for you.
  • WIDE APPLICATIONS - A perfect assistant for pole dancing.
  • Suitable for dancers, athletes, and someone who is trying to get a workout.
  • Great for gyms, yoga rooms, bars, clubs, or your home.
Check Stock

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

  • EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
  • Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
  • SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
  • Our strut compressor features detent pins that keeps the strut spring in place during compression.
  • Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
  • STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
  • Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
  • WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
  • Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
  • WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
  • Attach the threaded rods so that the hooks are set 180° apart.
  • Evenly compress both sides of the strut spring compression tool.
Check Stock

O'SKOOL 5 Star T-Track Knobs Kit 4-Pack with Star Threaded 1/4-20 Knobs, Bolts and Washers

  • INCLUDES: (4 ) Red 5star knobs 1/4”-20 UNC threaded knobs , (4 ) hex head bolts 1/4”UNC X 3 inch,(4 ) washers, (4 ) plastic washers.
  • Red knob kit with an ergonomic design for smooth handling and comfort . Stainless steel hex head bolt has pullout resistance and durability. Washers for your convenience，It is mainly used to reduce pressure and friction..
  • EASY TO USE : Tighten the knob, bolts, and washers arranged together to help secure and enhance your woodworking jig assemblies..
  • HOW TO USE : To use on your T-track, insert the head of a bolt into the track with a washer and align it with the threaded knob.
  • APPLICATION: This is for a retaining clip for use with a T-track slot, fixtures, and splint..
Check Stock

Accusize Industrial Tools 5/8\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0058

  • Smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
  • 9pcs hex screw, Hexagon key and Aluminum fitting case..
  • *** Insert kit Item#: 2988-0058INSERTS (Sold Separately on Amazon)***.
Check Stock