Top High Power Smd Module

UMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino

  • It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
  • 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
  • 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.
Check Stock

WICHEMI Storefront Lights RGB SMD 5050 Multi-Colors LED Window Lights 120FT 240PCS 3 LED Modules Window Strip Light Waterproof Business Light for Store Advertising Signs Indoor Outdoor Decor

  • 【Enough Brightness】- 3 LEDs for each module light, which ensure the brightness of your store, advertisements or any other attractive signs. There are 7 colors with the light: red, green, blue, purple, yellow,white, light blue. which can be switched between these 7 colors through the remote control..
  • 【Premium Commercial LED Light】- IP68 waterproof LED module lights with sticky Self-Adhesive tape on the back of each module, which is convenient for you to install. Just plug. No need to crimp male female connectors any more. You should pay special attention to the positive and negative poles of the connectors to avoid short circuit..
  • 【Ideal Decorative Light】- 5050 SMD module, 12V DC input voltage. With ABS plastic material, Waterproof led window lights can work in -20~60℃. Besides, the color of the plastic will not gradually become yellow after long-term using. You can cut it each led into the length you want, DIY your own LOGO or Lighted Store Signs. ideal for indoor and outdoor different DIY applications.
  • 【Energy-saving】- Low power consumption, high energy efficient. The business decorative window lights can....
Check Stock

LED Storefront Lights Pomelotree 40ft 80 Pieces Waterproof Decorative Light for Letter Advertising Signs 4 Set 5050 SMD LED Light Module Storefront Window Strip Light RGB Light

  • ✔Enough brightness- With upgrade 5050 SMD lamp beads, the LED storefront lights are brighter. The storefront LED light can expose a larger area with....
  • ✔Waterproof- The LED module lights can work in damp conditions, will not cause a short circuit. But you should pay special attention to the positive....
  • ✔Energy-saving- Low power consumption, high energy efficient. The business decorative Lights can make your signs attractive with less cost. A remote....
  • ✔Type- 5050 LED window lights, 40 Ft 80 Pieces, have 240pcs big 5050 SMD led chips with project lens. It is convenient for you to install with....
  • ✔Widely applications- The store window led lights are perfect for home, business store, wine shop, cars, signs, stereo shine word, marking, light....
Check Stock

WICHEMI Storefront Lights RGB SMD 5050 Multi-Colors LED Window Lights 100FT 200PCS 3 LED 5050 LED Modules Window Strip Light Waterproof Business Light for Store Advertising Signs Indoor Outdoor Decor

  • 【Enough Brightness】- 3 LEDs for each module light, which ensure the brightness of your store, advertisements or any other attractive signs. There are 7 colors with the light: red, green, blue, purple, yellow,white, light blue. which can be switched between these 7 colors through the remote control..
  • 【Premium Commercial LED Light】- IP68 waterproof LED module lights with sticky Self-Adhesive tape on the back of each module, which is convenient for you to install. Just plug. No need to crimp male female connectors any more. You should pay special attention to the positive and negative poles of the connectors to avoid short circuit..
  • 【Ideal Decorative Light】- 5050 SMD module, 12V DC input voltage. With ABS plastic material, Waterproof led window lights can work in -20~60℃. Besides, the color of the plastic will not gradually become yellow after long-term using. You can cut it each led into the length you want, DIY your own LOGO or Lighted Store Signs. ideal for indoor and outdoor different DIY applications.
  • 【Energy-saving】- Low power consumption, high energy efficient. The business decorative window lights can make your signs attractive with less cost. A remote controller, a receiver, a power plug and 18pcs wire connectors are included in ....
Check Stock

Pomelotree Storefront LED Lights 60ft 120 Pieces 3 LED 5050 SMD Window LED Lights LED Module Lights Waterproof Business Decorative Light for Store Advertising Letter Signs Strip Light RGB

  • ... light: red, green, blue and white. Each color have 5 different brightness, which can be adjusted through remote control. All Accessories are included (LED Lights, Power Plug, Remote controller and sealed connector)..
  • 【Popular commercial LED light】- IP68 waterproof LED module lights with sticky Self-Adhesive tape on the back of each module, which is convenient for you to install. Come with solder seal wire connectors in the package, it will be much easier for you to connect the lights wires. Please pay special attention to the positive and negative poles of the connectors to avoid short circuit..
  • 【DIY Business Decorative Light】- 5050 SMD module, 12V DC input voltage. With ABS plastic material, Waterproof led window lights can work in -20~60℃. Besides, the color of the plastic will not gradually become yellow after long-term using. You can cut it each led into the length you want, DIY your own LOGO or Lighted Store Signs..
  • 【Energy-saving】- Low power consumption, high energy efficient. The business decorative window lights can make your signs attractive with less cost..
Check Stock

AURSINC SHARI PiHat - Portable SA818 Ham Allstar Radio Interface Compatible with Raspberry Pi 2/3/4 | Raspberry Pi Hosted Allstar Node | UHF Frequency Range 1W 420-450MHz/70cm | Amateur Radio Operator

  • ... Ham Allstar Radio Interface) is designed for construction and uses in the amateur radio service, works with a Pi2/Pi3 or Pi4, SHARI RF output power is 500 to 1000(default) milliwatts.
  • [Allstar Node] SHARI PiHatU implements a Raspberry Pi hosted Allstar node using a NiceRF SA818 embedded UHF (420-450 MHz|70cm) radio module.
  • In order to create an Allstar node, SHARI plugs into two USB jacks on a Raspberry Pi2/Pi3 or Pi4 for power, the Allstar interface and radio programming (a short M/F USB extender cable can be used if desired) ；Note: only work with allstar node or any analog node.
  • [Power Supply] SA818 Ham Allstar Radio Interface is a power supply intended for the version of the Raspberry Pi. These supplies typically provide 5.1 to 5.2 VDC to the Pi. Current requirements vary with version. Numerous problems with Allstar Nodes have been traced to inadequate power supplies..
  • [Feature 1] Front panel LEDs indicate the status of SHARI-POWER (green), USB Audio CONNECTION STATUS (blinking green), COS (green) and PTT (red).
  • SHARI PiHat uses 5 volts from the Pi, and the best place to measure it is from pin 8 (+5) to pin 9 (GND) of the SA818 module.
  • [Feature 2] SHARI PiHat uses a single circuit board which contains installed surface mount (SMD) parts as well as ....
Check Stock

GIGABYTE Z790 AORUS Elite AX (LGA 1700/ Intel Z790/ ATX/ DDR5/ Quad M.2/ PCIe 5.0/ USB 3.2 Gen2X2 Type-C/Intel WiFi 6E/ 2.5GbE LAN/Q-Flash Plus/PCIe EZ-Latch/Gaming Motherboard)

  • Intel LGA 1700 Socket: Supports 13th and 12th Gen Intel Core Series Processors.
  • DDR5 Compatible: 4*SMD DIMMs with XMP 3.0 Memory Module Support.
  • Commanding Power Design: Twin 16+1+2 Phases Digital VRM Solution with 70A Power Stage.
  • Cutting-Edge Thermal Design: M.2 Thermal Guard III, Fully Covered MOSFET Heatsinks, PCIe Ultra Durable Armor, 6-Layer PCB.
  • Next Gen Connectivity: SMD PCIe 5.0, 4* PCIe 4.0 x4 M.2, USB 3.2 Gen 2x2 Type-C.
Check Stock

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..
Check Stock

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Check Stock

Weewooday 15 Pieces 5V Relay Module 1- Channel Relay Control Boards with Optocoupler Isolation High and Low Level Trigger Expansion Board

  • Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
  • Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
  • The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
  • Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
  • All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
  • High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
  • Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.
Check Stock

200pcs 160 Deg DC 12V Daylight White 0.72W Injection LED Module Backlight 2835 SMD Waterproof Decorative Light for Letter Sign Advertising with Tape Adhesive Backside

  • 3 LED 2835 SMD Module, Color :White, 12V DC input voltage..
  • 20 modules per string, 14.4 watt per string, cuttable, power supply NOT included.
  • Applications: Store, Restaurant, Coffee, Bar, Bank, Airport, Railway, public advertise and notice .Channel Letters Backlighting, Advertisement Signs, and Signage letters.
Check Stock

EC Buying AD620 High Accuracy Low Power Programmable Instrumentation Amplifier Module Voltage Amplifier Module Differential Amplifier Single-Ended/Differential Small Signal/Small Amplifiers Module

  • ... range of 1 to 10,000. Ideal for portable (or remote) applications. With high accuracy, low offset voltage, and low offset drift, the AD620 is ideal for precision data acquisition systems such as electronic scales and sensor interfaces. Also features low noise, low input bias current, and low power consumption. The module has a fixed voltage output..
  • ♥Basic Features: ✭Module Name AD620 Instrument Programmable Amplifier ✭Module size:50mm * 50mm ✭Module power supply: 5V-24V ✭Module input signal type: single-ended signal or differential signal ✭Module signal input and output range: the input signal range is within 100 microvolts of the power supply, and the output signal range is within the power supply ✭Module bandwidth: AD620: 120KHz (G=100), AD623: 800KHz (G=1), AD620/623 is lower than 50KHz at high gain, and higher than 1MHz at low gain.
  • ♥ Other Features: ✭Module gain: When there is no solder slip, the AD620 will zoom by 10 times by default, and the AD623 will zoom by 20 times by default. During welding slip, AD620: G=1+50K/Rg, AD623: G=1+100K/Rg ✭Maximum magnification of the module: more than 2000 times (actual measurement), due to the large gain of the waveform frequency band, it is recommended to use multi-stage amplification wi....
Check Stock