Top High Pressure Tubing

Seaboard Air Line Passenger Service: The Streamlined Era

  • Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
  • Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
  • Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
  • Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
  • Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
Check Stock

Beduan Pneumatic Tubing Pipe 3/8\ OD Blue Air Compressor PU Line Hose Tube for Water Fluid Transfer 10Meter 32.8ft

  • PU Tubing Pipe Material: PU( Poly Urethane ).
  • PU Tubing Pipe Size: 3/8" (Outer diameter) , 1/4" (Inner diameter). Package Total Length:32.8 Feet (10meters).
  • Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2.
  • Tubing Pipe Features: Excellent flexibility, Small bending radius.
  • Wide range for working temperature and pressure.
  • Excellent chemical properties, Minimal pressure loss.
Check Stock

(100-PACK) - 1/4\ Inch 360 Degree Drip Emitter On 6\ Stake Sprayer Adjustable Flow 0-20 GPH, Fits 1/4 (4-6mm) Irrigation Tubing - Micro Bubbler Drippers for Drip Irrigation (100 Pack Dripper on Stake)

  • SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing)..
  • PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur..
  • DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE..
  • ECO FRIENDLY: Provide water directly where you need it without any overspray!.
  • EASY TO INSTALL: Install emitters directly into the 1/2 main line or branch off with 1/4 inch tubing and connect fittings to the ends! INCLUDES CONNECTORS!.
Check Stock

In-Ground Sprinkler System with Hose Watering Timer

  • EVERYTHING YOU NEED: Kit contains digital timer, 6 high-efficiency sprinklers, Blu-Lock tubing and fittings, tubing cutter, and 200 lb. pressure gauge.
  • FAST AND EASY INSTALLATION: Blu-Lock has reduced required insertion force by half of traditional barb fittings, making installations faster and easier on your hands.
  • PUSH-ON QUICK-RELEASE FITTINGS: Blu-Lock quick-release collars allow for easy removal, yet the stronger the water pressure, the more the retaining rings grip the pipe to ensure against leaks.
  • ENVIRONMENTALLY FRIENDLY: Blu-Lock requires no glue or plumbers tape, protecting the environment from harmful chemicals used with traditional PVC fittings.
  • CONSERVE WATER: The timer features rain delay so you arent watering in the rain.
  • FLEXIBLE PROGRAMMING: A run time of 1-240 minutes, with intervals from every 6 hours to once every 7 days.
  • AREA COVERAGE: Ideal for medium to medium-large area coverage from 2,300-6,900 sq. ft. with average residential water pressure and flow.
  • ADJUSTABLE DISTANCE: Easy to adjust spray distance for each sprinkler from 15-25 ft. radius.
  • PART OR FULL CIRCLE: Simple to adjust from 40 to 360 degrees while the water is on or off.
  • TOOLS INCLUDED: Test water pressure before installation with the included 200 lb. gauge to ensure system....
Check Stock

Beduan Pneumatic Tubing Pipe 5/16 OD Clear Air Compressor PU Line Hose Tube for Water Fluid Transfer 12Meter 39.4ft

  • PU Tubing Pipe Material: PU( Poly Urethane ).
  • PU Tubing Pipe Size: 5/16" (Outer diameter) , 3/16" (Inner diameter). Package Total Length:39.4 Feet (12meters).
  • Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2.
  • Tubing Pipe Features: Excellent flexibility, Small bending radius.
  • Wide range for working temperature and pressure.
Check Stock

Brass Barbed Tee 3 Way Fitting 1/4 inch by 1/4 inch by 1/8 inch Hose Connector fittings for air fuel water lines 1

  • Lead Free Brass See photo for materials composition report.
  • Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way..
  • They are commonly used for low-pressure applications in the food and beverage, marine, and chemical processing industries to convey air, fluids, and chemicals through a pipe system..
  • Ideal for quickly connecting polyethylene tubing for use in environmental pneumatic controls and other low-pressure applications with water and air..
  • Hose barb fittings are used most often in applications where we're using soft tubing. That could be beverage dispensing. That could be running an airline to your fish aquarium for your air filter. That could even be a low-pressure re-circulating pump on your aquarium as well. In a nutshell, hose barb fittings are used almost anywhere you use soft-side tubing and not in a high-pressure application. They make things versatile, very easy to use..
Check Stock

Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter - Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4" FHT

  • ...PER FIT. Compatible with many models of Rainbird, Orbit, Dig, Hunter and Toro tubing as well as generic 1/2″ blank drip irrigation tube or drip line. Large fitting ID means less flow restriction..
  • ZERO LEAKS. Power-Loc fittings don’t leak. Barb design ensures tubing will not slip out or blow off at high pressure and temperature. No slippage or leaking, even under high pressure..
  • REUSABLE & LONG LASTING. Unlike other types of fittings, these parts are reusable and may be removed and reinstalled for a long, versatile life. Simply loosen nut to remove tubing. Durable construction provides years of reliable use..
  • PATENTED LOCKING TECHNOLOGY. Power-Loc fittings are quickly revolutionizing irrigation fitting expectations worldwide. The patented locking technology works great under high pressures and around heavy foot traffic. A more rugged alternative to insert and compression fittings, these adaptors have a locking mechanism that is easily tightened after the drip line is pushed on..
Check Stock

mistcooling High Pressure Misting System 1500 PSI - Flexible (60 Feet - 20 Nozzles)

  • Features: Base 20 Nozzle Kit Contains: - 1 - Max1500 psi High pressure pump with built-in water on/off valve, low water cut off switch, pressure bypass, commercial 5-micron filtration, Outdoor Rust Proof Enclosure with on/off Switch.
  • - 60ft 1/4" Nylon Tubing-Black - 20 - HP Push Lock Misting Tees.
  • - 20- Stainless Steel Orifice Nozzles (0.006") - 1 - Push Lock End Plug - 2- Nozzle plugs - 2- Replacement Nozzles - 1- Drain Valve Assembly - Stainless Steel Mounting Clamps.
  • Specs:1500 PSI Misting Pump: 0.15 & 0.30 GPM - For up to 40 Misting Nozzles - Pressure Adjustment Valve to allow increase or decrease of the outlet water pressure. - Pump pre-set for ideal working - Solenoid Valve – controls flow of water in the misting pump - Pressure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
  • Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
  • However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
Check Stock

Hromee Compressed Air Piping System with 3\\/4 inch x 100 feet HDPE Tubing and Aluminum Outlet Blocks for Garage Connect Air Compressor Hose Accessories 37 Pieces

  • LEAK-LESS - High-density polyethylene(HDPE), a layer of aluminum is sandwiched between layers of HDPE, is extremely ductile, lightweight and corrosion resistant. And it has a smooth surface, which reduces the energy to push compressed air through the compressed air system. Above of all, it will keep pressure while running for long time. Operating Pressure: 200PSI at 73℉and 160PSI at 140℉..
  • EASY TO CONNECT - No glue, soldering or crimping needed. L-shaped and T-shaped fittings are equipped in the kit for different tubing extending directions. Double O-ring compression style ensures 100% sealing in high working pressure..
  • FLEXIBLE - Do not need to worry about elbows because HDPE tubing is flexible enough to be bent to any shape. The 3/4-inch inside diameter of the pipe has a bend radius of 6-8 inches. 100 Feet continuous pipe lengths which means less leak points. Inner Diameter: 3/4”.
  • EASY TO MODIFY - It’s convenient and low-cost to expand or make another drop. Just purchase additional accessories and install based on present pneumatic line. Perfect for garages, workshops, barns and etc..
Check Stock

DAVCO 3/4 ID x 5 ft PVC Reinforced Tubing With Spiral Steel Wire High Pressure Flexible Vinyl Hose Heavy Duty Clear Suction Tube,Non-Toxic Vacuum Dust Collection Pipe

  • [Durability]. DAVCO steel wire tubing with double layer of high quality PVC material and reinforcement layer of spiral steel wire, longer service....
  • [Tubing Details]. 3/4 inch inner diameter, 1 inch outer diameter, wall thickness: 1/8 inch , 5 feet length. Max Working pressure:120 PSI. Temperature....
  • [Strong Pressure Resistance]. DAVCO tube wall is thickened design, strong resistance, in vacuum and high temperature environment can maintain a good....
  • [High standards]. DAVCO clear vinyl tubing use professional technology and teams. The DAVCO brand has high requirements for products, and every....
  • [Experienced and professional]. DAVCO is a professional brand that is committed to the water hose production industry. For the past 10 years, our....
Check Stock

Thogus Nylon Tube Fitting, Tee, White, 5/8\ Barbed (Pack of 10)

  • Nylon for strength, flexibility, and resistance to abrasion, crushing, and cracking.
  • 200 series barbed fitting creates a secure seal with flexible tubing in high-pressure applications.
  • Meets standards set by RoHS for hazardous materials.
Check Stock

Food Grade Silicon Tubing Hose - 3/16\ ID x 5/16\ OD 3 Feet High Temp Pure Silicone Hose, Flexible Silicone Rubber Tube For Home Brewing Pump Transfer Winemaking, Kegerator,Aquaponics

  • ...stance to common acid and alkali,chemicals, solvents. (Strong acid and strong alkalis will react chemically with food grade silicone tube).
  • This silicone tube is soft and flexible, which is suited for solids of suitable granular size, such as factory air lines automation machinery and pneumatic lines and general low pressure industrial applications for the conveyance of chemicals, liquids, gases..
  • This food grade silicone pipe is widely used for home brewery, water distiller, AC and HVAC tubing, wine and beer making line, home zone generator, hot water dispenser, milk and food handling processing, pumps, ponds, gardens and low pressure industrial transferring system of chemicals, liquids, gases, and solids of suitable granular size, such as factory air lines automation machinery and pneumatic lines..
  • The pre-cut silicone rubber tubing won't decompose under the high temperature, and have a longer service than plastics tube and latex tubing. Good flexibility, not easy to deform.UV resistant, does not deteriorate outdoors. Extremely durable. Smooth inner surface for easy flow and easy cleaning, is a perfect choice for beverage and brewing in the kitchen.
Check Stock