Top High Strength Boring Bar

9pcs 2 Boring Head R8 Shank 1/2 Carbide Boring Bar Set Milling

  • 2" Boring Head With R8 Shank.Head size: 2".Boring bar Hole: 1/2".
  • Cross Hole Dia: 1/2".Maximum Offset: 5/8".Thread: 1.5"-18.Graduations: 0.001/0-50.
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting.
  • Packing including:1pcs 2" Boring Head, 1pcs R8 Shank, 9pcs 1/2" Carbide Boring Bar,3pcs Allen Wrench.
Check Stock

Boring Head Set, Carbide Boring Bar MT2 -M10 F1-12 50mm Boring Head with 9pcs 12mm Boring Bars Milling Machine Accessories for Boring and CNC Milling Machine Tools

  • SUITABLE FOR : The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
  • USED FOR : This tool set is made of high quality material, good wear resistance, and durable in use.It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
  • PACKAGE LIST : This tool set contains 1 x drawbar thread: MT2 M10*1.5 1-1/2"-18UNF,1 x F1-12 50mm boring head with 12mm hole accept ,9 x boring carbide tips with 12mm shank,3 x keys ,1 x plastic case.
  • QUALITY ASSURANCE :100% brand new and the quality of our products is guaranteed.We supply fast and convenient return or replace service to insure purchasing without worries. If you have any questions about our products,please feel free to contact.
Check Stock

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MCLNR12 with 10pcs CNMG431 / CNMG120404 Indexable Carbide Turning Inserts

  • ★S16Q-MCLNR12 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction:right hand..
  • ★CNMG431 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
  • ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
  • ★Package : 1pc S16Q-MCLNR12 boring bar + 10pcs CNMG431 carbide insert + 1pcs wrench.
Check Stock

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MTJNR16 with 10pcs TNMG331 / TNMG160404 Indexable Carbide Turning Inserts

  • ★S16Q-MTJLNR16 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction:right hand..
  • ★TNMG331 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
  • ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
  • ★Package : 1pc S16Q-MTJLNR16 boring bar + 10pcs TNMG331 carbide insert + 2pcs wrench.
Check Stock

2\ Boring Head SET 9 Pcs Carbide Boring Bars with R8 Shank 1/2'' Mill

Check Stock

4\ BORING HEAD SET 6 PCs CARBIDE BORING BAR WITH R8 SHANK 4 INCH BORING 1'' MILL

Check Stock

HGC BT30 Tightening Fixture CNC Tool Holder Tapers For BT30 Machine Tool Handle

  • For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
  • Heavy Duty Boring Bar Holder to holds 3/4" tool with bushing, 1" diameter without bushing.
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter.
  • Precision ground and hardened. Completely sealed for maintenance free operation.
Check Stock

Oregon 72LGX100U PowerCut Saw Chain, 100' Reel

  • Recommended saw size: 50 to 100cc, bar length: 16 to 36-inch (41-91cm).
  • Patented chain steel-oregon ocs-01 steel is patented and provides greater durability, especially in cold cutting conditions.
  • Blued cutters provide superior corrosion resistance and improved strength.
  • "X" grind-Enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes.
  • Warning: oregon 72, 73, and 75lgx super guard chains may be capable of kickback that could result in serious injury to the saw operator or bystanders.
Check Stock

Oregon 73LGX100U PowerCut Saw Chain, 100' Reel

  • Recommended saw size: 50 to 100cc, bar length: 16 to 36-inch (41-91cm).
  • Patented chain steel-oregon ocs-01 steel is patented and provides greater durability, especially in cold cutting conditions.
  • Blued cutters provide superior corrosion resistance and improved strength.
  • "X" grind-Enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes.
  • Warning: oregon 72, 73, and 75lgx super guard chains may be capable of kickback that could result in serious injury to the saw operator or bystanders.
Check Stock

Oregon 72DPX100U VersaCut Saw Chain, 100' Reel

  • Oregon 72DPX100U 3/8" Pitch .050" Gauge Saw Chain - 100' Reel.
  • Blued cutters provide superior corrosion resistance and improved strength which makes the DPX chain excellent for dusty or dirty conditions.
  • "X" grind - Enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes.
  • Round-cornered "semi-chisel" cutters work fast and typically are more tolerant of sharpening errors than most cutter types.
  • Recommended Bar Lengths: 16 to 36 in. (40 - 90cm) Recommended Saw Sizes: 50 to 100cc.
Check Stock

OREGON 20LPX081G 81 Drive Link Super 20 Chain 0.325-Inch

  • Recommended saw size: 38 to 62cc, bar length: 11-20-inch (28-50cm).
  • Blued cutters provide superior corrosion resistance and improved strength.
  • "X" grind-Enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes.
  • Warning: oregon 20, 21, and 22lgx super 70 chains may be capable of kickback that could result in serious injury to the saw operator or bystanders.
Check Stock