Top High viscosity Glue

Professional Grade CA Super Glue by CYAPRO, Fast Curing Adhesive 2 oz, Low Viscosity, Thin Cyanoacrylate Adhesive for Woodworking, Hobby, Plastic, Ceramic & Metal, transparent

  • Professional Grade Cyanoacrylate Super Glue: CYAPRO cyanoacrylate adhesives offer the best bonding performance, thin, low viscosity super glue will usually give you the bond you need in less than 5 seconds.
  • Instant CA Glue: Low viscosity CA glue, also known as instant CA glue, has a viscosity of 2-5 CPS and provides ultra-fast bonding and deep penetration for repairing small holes and cracks.
  • Precise Micro-Tips Fittings: CYAPRO Super Glue comes with 3 micro-tips fittings to perfectly repair tiny cracks and to assist in controlling the amount used during application. Extra applicator and anti-clogging cap with microneedle on top of the applicator to prevent clogging.
  • Suitable for Multiple Materials: Our CA glue is suitable for wood, metal, rubber, leather, ceramics, gemstones, rocks and minerals, carbon fiber, fiberglass, PVC and most plastics. It is the best choice for DIY enthusiasts, modelers, carpenters and model enthusiasts.
  • WARNING: Do not use on fabric and always wear goggles. Keep out of direct sunlight and store in a cool, dry place.
Check Stock

Xfactor Hydro XFUV10BLK 10ml LOCA UV Glue - Premium Grade LOCA (Liquid Optical Clear Adhesive) - Low Viscosity !!

  • ...AIR: STICKY-iCKY 1000 Liquid Optical Clear Adhesive (LOCA) is formulated especially for bonding the outer glass to the digitizer in a smart phone or tablet display assembly. Compatible with ALL touchscreen devices, phones and tablets needing LOCA to attach glass and/or digitizer to LCD.
  • PROFESSIONAL GRADE, ULTRA LOW VISCOSITY adhesive dries clear! - 2000mPa*s viscosity (general LOCAs average 5000mPa*s). Thanks to such LOW VISCOSITY, bubbles/voids can be easily removed, smaller amounts of glue can be used, easier to clean, flows well, & cures with NO YELLOWING EFFECT, GUARANTEED!.
  • EXCELLENT GAP FILLING & HIGH LIGHT TRANSMITTANCE: Xfactor UV GLUE LOCA fills fine scratches that may occur upon removing the old adhesive. Xfactor UV GLUE eliminates mirror effect, rainbow effect, poor contrast, and low brightness, while improving touch sensitivity for that OEM look and feel you so desire!.
  • BLACK LIGHTPROOF TUBE ensures adhesive will remain in a liquid state, rather than harden like transparent tubes. Note: LOCA is sensitive to UV. Exposure to sunlight will cure adhesive, which is why all our tubes are black.
Check Stock

Professional Grade CA Super Glue by CYAPRO, High Performance Adhesive 2 oz, Medium Viscosity Cyanoacrylate Adhesive for Plastic, Ceramic, Wood, Metal, Glass, Rubber & DIY Crafts, Clear

  • Professional Grade Cyanoacrylate Super Glue: CYAPRO cyanoacrylate adhesives offer the best bonding performance, this medium viscosity super glue will usually give you the bond you need in less than 10 seconds.
  • General Purpose CA Glue: Medium viscosity CA glue, also known as general purpose CA glue, has a viscosity of 100-120 CPS. It provides more control while maintaining good flow and is suitable for most home repair and carpentry projects.
  • Precise Micro-Tips Fittings: CYAPRO Super Glue comes with 3 micro-tips fittings to perfectly repair tiny cracks and to assist in controlling the amount used during application. Extra applicator and anti-clogging cap with microneedle on top of the applicator to prevent clogging.
  • Suitable for Multiple Materials: Our CA glue is suitable for wood, metal, rubber, leather, ceramics, gemstones, rocks and minerals, carbon fiber, fiberglass, PVC and most plastics. It is the best choice for DIY enthusiasts, modelers, carpenters and model enthusiasts.
  • WARNING: Do not use on fabric and always wear goggles. Keep out of direct sunlight and store in a cool, dry place.
Check Stock

MMOBIEL Glass Repair Glue for Smartphone Repair – UV Glue Loca TP2500 – Glue for Phone Screen – Transparent – 5X 5ml

  • MMOBIEL 5 Pack UV LOCA Liquid Optical Clear Adhesive 5 ML – Glue Adhesive Transparent TP-2500 specially designed for cell phone screen repairations. Repair: MMOBIEL Liquid Optical Clear Adhesive (LOCA) is formulated especially for bonding the outer glass to the digitizer and / or LCD in a smartphone display assembly..
  • Please Note: Repairing your cell phone screen is a VERY delicate procedure, please make sure you are confident that you can carry it out successfully before beginning..
  • Excellent gap filling: MMOBIEL LOCA easily fills small scratches left on the digitizer surface which can occur when removing the screen and old adhesive..
  • Low viscosity: The glue is not very thick and flows extremely easily. Lower viscosity means that you can use less glue for the job and increase the optical performance. High light transmittance: MMOBIEL LOCA glue improves the viewing experience by increasing the contrast ration and minimizes quality loss due to reflection..
  • High quality product by MMOBIEL: Each part is tested before shipment. Item in Stock..
Check Stock

Geeetech JT16 PVP Solid Glue Stick, 6pcs/Set,36g,for 3D Printer Hot Bed,Quick Dry,Easy to Stick and Washable,Green Tube

  • ...nd Durable】Designed for all 3D printer enthusiasts, it overcomes warping issues in 3D printing, helps 3D printed parts stick to the build plate during printing, and makes the finished model easy to release. High-capacity and reusable, enabling multiple prints with minimal usage..
  • 【Excellent Adhesion】Solid form viscosity, high viscosity formulation, good adhesion to all surfaces and impermeability. Very stable after pasting, wrinkle-free and smooth bottom. Its water solubility, dispersion stability and thickening properties can make up for various shortcomings of liquid glue and PVA glue. Leading the way in advanced adhesives in the 3D printing industry, gradually becoming a must-have for 3D printing..
  • 【Easy To Use And Clean】Swivel bottom design, lightweight and portable, easy to use and store. Simply apply the glue lightly to the active print area without covering the entire surface. This solid glue stick spreads smoothly and dries quickly. After drying, it can be washed with water or wiped off with a towel..
  • 【Wide Compatibility】Compatible with almost all 3D printer heated beds, suitable for any DIY or craft project, enough for everyday needs. It is recommended to close the cap after each use to prevent the glue from drying out..
Check Stock

EDSRDXS UV Bonding & Welding Glue Kit UV Super Bonding Soft & Hard Glue with Black Light, Quick-Drying for Bonding Glass, Metal, Plastic 2 Pack Each 0.7oz (20ml x 2pack)

  • LIQUID PLASTIC BONDING KIT：EDSRDXS UV bonding glue contains two selected bonding function UV glue (soft & hard), each of which is 0.7 oz, 20ml. It is a low-viscosity, high-strength and UV-curable modified acrylate adhesive..
  • UV super bonding soft glue can still maintain a certain degree of toughness (can maintain a small degree of bending) after bonding. It is specially used for laminating PC, PMMA, PET, PS (excluding PP), and is also suitable for laminating plastic, glass, and metal. combine. UV super viscous hand feeling glue has a viscosity of 450-550 CPS and is a colorless transparent liquid. It can withstand extreme temperatures from -22°F to 275°F (-30°C to 135°C). Under pen light, it cures within 30-40 seconds and remains transparent, never yellowing..
  • UV super bonding hard glue is transparent light yellow liquid, excellent for bonding between glass and metal, glass and glass. It has a special engineering viscosity of 300 to 400 CPS, which provides better adhesion on relatively narrow fracture surfaces. This glue can work at extreme temperatures ranging from -40°F to 194°F (-40°C to 90°C). It can be cured within 60s under the irradiation of....
Check Stock

BSI / Taytools Bob Smith Industries 5 Piece Set Cyanoacrylate CA Super Glue Including Thick, Medium and Thin Viscosities Accelerator and Debonder Fine Tip Applicators 1-2 Ounce Bottles

  • Set includes 1 ounce bottle each of thick (Maxi-Cure TM), medium (Insta-Cure+ TM) and thin (Insta-Cure TM) Cyanoacrylate Glue and Debonder (Un-Cure TM) and 2 ounce bottle of Accelerator (Insta-Set TM)..
  • Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds..
  • Insta-Cure+ (TM) is BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
  • Maxi-Cure (TM) is BSI’s thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly.
  • INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry scent and activates CA without any degrading of the CAs strength. UN-CURE (TM) debonder will soften cured CA to clean up squeeze out, spills or for disassembly..
Check Stock

ECO BOOM Bamboo Viscose Baby Diapers 100% Natural Safe for Sensitive Skin Organic Disposable Diapers Size 2 6-16lb Pure White Eco Diaper 36 Count

  • 100% bamboo Viscose fiber top sheet: ECO BOOM bamboo Viscose diapers top sheet are made of non-woven bamboo Viscose fabric with FSC certification.....
  • Super absorption core: ECO BOOM bamboo Viscose diapers adopt German high quality and high absorption material, which has excellent absorption....
  • 100% natural bamboo Viscose back sheet: 100% bamboo Viscose fiber nonwoven back sheet. ECO BOOM diapers have super breathable and allows internal air....
  • Triple elastic eartips: Super flexible to ensure that your baby's waist is not too tight. Velcro tape material can also avoid cuts from the baby's....
  • Chemical-free: ECO BOOM nappies Use TCF (Total Chlorine Free) pulp, which is the most advanced chlorine-free bleaching process. The adhesives and glue....
Check Stock

MMOBIEL UV LOCA TP2500 50ML Unit Liquid Optical Clear Adhesive Glue Adhesive Transparent Suitable for All Smartphone Repair Jobs Like Display Exchange

  • MMOBIEL UV LOCA Liquid Optical Clear Adhesive 50 ML - Glue Adhesive Transparent TP-2500 Specially designed for cell phone screen repairations. Repair: MMOBIEL Liquid Optical Clear Adhesive (LOCA) is formulated especially for bonding the outer glass to the digitizer and / or LCD in a smartphone display assembly..
  • Please note: Repairing your cell phone screen is a very delicate procedure, please make sure you are confident that you can carry it out successfully before beginning..
  • Excellent gap filling: MMOBIEL LOCA easily fills small scratches left on the digitizer surface which can occur when removing the screen and old adhesive..
  • Low viscosity: The glue is not very thick and flows extremely easily. Lower viscosity means that you can use less glue for the job and increase the optical performance. High light transmittance: MMOBIEL LOCA glue improves the viewing experience by increasing the contrast ration and minimizes quality loss due to reflection..
  • High quality product by MMOBIEL: Each part is tested before shipment. Item in Stock..
Check Stock

DentMagicTools.com TECH-820 12mm 1/2 820 tec Series Professional PDR Glue Gun

  • Quick Heating System: 100W hot melt glue gun, Featured with premium thermal heating system, high quality ceramic PTC heating chip, only takes 3....
  • Improved Process: Glue gun has independent power switch, status indicator, anti-drip/anti-back glue, Protective Nozzle Cover, stable stand, vent....
  • Prodessional glue stickes :Upgraded glue sticks with a strong viscosity and superior pulling power, Does best job on Relatively Hard Parts on Cars..
  • Safe and Efficient: Ergonomic design and suitable size make it comfortable to handle. Made with high quality plastic engineered to sustain high....
  • Widely useI:The mini hot melt glue gun with glue sticks is not only for car dent removal, but also can be used used to stick toy model, artificial....
Check Stock

EDSRDXS UV Bonding & Welding Glue Kit UV Super Bonding Glue with 3W UV Light Quick-Drying & Waterproof Liquid Plastic Welding Kit for Plastic Glass Metal 0.35oz 10ml

  • EDSRDXS UV bonding glue equips with 3W 395nm UV light, which is 0.35oz, 10ml. It is a low-viscosity, high-strength and UV-curable modified acrylate adhesive. This UV glue has a viscosity of 450 to 550 CPS, and is transparent colorless liquid..
  • Our UV bonding & welding glue provides excellent adhesion to plastics, specially allows you to bond PC, PMMA, PET and PS (not including PP), also to bond any glass, metal materials together. Ideal for fixing worn phone cords, broken household items, arts & crafts, jewelry making, laminating decals and much more..
  • The 3W 395nm UV lamp equipped with high-quality LED lamp head has super bright light and emits a strong beam. Under this light, the glue can be cured within 30-40s. Before using, the bonding surface must be dusted, oiled and dried. To ensure that the UV lamp is fully irradiated, one of the surfaces to be bonded is transparent material..
  • After curing, this glue dries clear and humidity without whitening. Once fully cured it can be sanded or painted after it is hardened. It is waterproof and withstands extreme temperatures of -22°F to 275°F (-30°C to 135°C). Very suitable for indoor and outdoor use..
  • EDSRDUS UV glue is made of environmental friendly materials. There is no strong odor after curing....
Check Stock

uxcell Mini Hot Glue Gun Sticks 12-inch x 0.44-inch for Glue Guns, White 12pcs

  • 12-inch long and 0.44-inch diameter hot glue sticks fits most of glue guns on the market. Safe to use with both high and low temperature glue guns..
  • EVA material, with strong viscosity, easy operation, aging resistance and good temperature resistance, will not harden after long-term storage..
  • Tough & versatile, Hot Glue Sticks provide a long term hold even on hard to bond surfaces..
  • 7mm glue stick is used for 12W, 20W, 25W and 30W small glue guns (below 30W, including 30W).
  • 11mm glue stick is used for 60W, 80W, 100w-200w (above 60W).
  • Please Note : Avoid exposing the hot melt adhesive stick to the sun for a long time. The nozzle of the hot melt glue gun and the melted glue sticks are at a high temperature during operation. Do not touch them..
Check Stock