Top Hose Pipe Extrusion Line

Spring Hose Clamp 6-22mm Spring Band Type Action Fuel Silicone Vacuum Hose Pipe Clamp Low Pressure Air Clip Clamp-100Pcs

  • 【High Quality】These hose clamps are made of 65Mn Spring Steel. which is durable and sturdy, corrosion resistance in a humid environment, nice construction and hold very well.
  • 【Hose Clamps Size】This hose clamp assortment include 10 different diameters clamps 6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 16mm, 18mm, 20mm, 22mm, each size 10 pieces, Fit many sizes of hoses.
  • 【Easy to Use】The surface of clamps are polishing that can effective prevent pipe damage, using pliers to open the clamps surface, Easy to tighten since it is out away from the hose surface..
  • 【Wide Applications】Spring hose clamps wide used for fuel lines/ vacuum hoses/ gas pipe/ air hose/ water pipe/ silicone hose, great choose for garage, boats, motorcycles, lawn and car engines connection, etc.
  • 【Package】Total 100 Pieces fuel line clamp, come with a plastic storage box has classification figure inside, could facilitate your storage and classification size..
Check Stock

Faucet Supply Lines Connector Stainless Steel Braided Supply Hose 3/8-Inch Female Compression Thread x M10 Male Connector, 24-Inch Long x 2 Pcs (1 Pair)

  • Standard US 1/2 "internal thread, the faucet supply line connector inlet is 3/8" compression connection to the supply stop valve, its outlet is 1/2 "female iron pipe (FIP or IPS), its total length is 11-4/5". There are 6 pieces 1/2 supply line in the package..
  • The 1/2 inch faucet supply lines external and internal are made of high quality 304 stainless steel material, rust proof and corrosion proof, not easy to break, and longer service life..
  • Thick rubber gasket with a high sealing hose, can effectively prevent leakage.The 1/2 inch sink hose is woven of high strength stainless steel to ensure maximum pressure and optimal performance. Let you always avoid the unpleasant of a broken water pipe..
  • The braided faucet line connector is easy to install, flexible hose, easy to handle, sturdy stainless steel nut, plus the hose is equipped with an ABS wrench, no other tools, direct hand tightening to complete installation..
  • The 1/2 inch toilet supply line It can be compatible with most standard size faucets. Suitable for kitchen, bathroom, toilet, washbasin, water heater, toilet, hot and cold water supply, base faucet, etc..
Check Stock

T-Bolt Hose Clamp Adjustable Stainless Steel Titanium Blue Clamp Diameter Ranger for 2.75\ inch（72-80mm）#4124

  • Size & Package: AN8, Included: 4 Pc x Hose Pipe Clamp.
  • Universal: Aluminum Hex AN4 clip pipe finisher, Fit for Braided Fuel Hoses / Vacuum Hose.
  • Fuel line clamp feature: anti-rust, anti-corrosion, waterproof, oil-proof. Pipe clamps are sturdy, strong and reliable.
  • Easy Installation: Design to Hex, better work with the wrench and looks more fashion and tidy appearance to your hoses with easy installation of a hose clamp.
Check Stock

Fuel Line Pliers Quick Release Remover Set, 9 inch Fuel Filter Calipers Tools for Auto Removal Fuel Filter Line & 7PCS Air Conditioning Cooling Pipe Hose Circlip Pliers Kit

  • ...omic Design】The design of the spring automatic rebound function of the fuel filter caliper can help you save time and effort in the operation process. Coupled with the comfortable handle and the cooperation of different sizes and angles, you can easily disassemble the vehicle fuel pipe or air conditioning cooling hose even in the dead corner where the space is narrow or difficult to work..
  • 【Easy To Use】This set of quick disassembly pliers for automobile oil pipe and air conditioning pipe has a variety of sizes, the handle is easy to grasp, and the jaw has a variety of angles such as 45º/ 90º/ 180º, allowing access to small areas that are difficult to reach. Clamp the jaw on the fuel pipe and remove it easily..
  • 【Wide Application】Fuel Line Disconnect Tool Set used to remove and replace the connectors on the in-line fuel filter. They are suitable for cars of various common brands in daily life,such as Ford/GM /Chrysler/Mazda/Benz/VW/BMW/Audi and can also be used for the connectors of some electrical air conditioning hoses..
  • 【Package Includes】This set includes 3 fuel line hose pliers and 7 different sizes ....
Check Stock

55587854 Pipe Turbo Oil Return Pipe Tube for Chevy Cruze Sonic Trax Buick Encore 1.4L Engine Turbocharger Oil Return Hose Line 55569839

  • [Fitment] - Turbo oil return hose tube line fit for 2011- 2019 Chevrolet Cruze 1.4L, for 2016 Chevrolet Cruze Limited 1.4L, for 2012-2019 Chevrolet....
  • [Replace Part Number] - Turbo oil return pipe tube replace number is 55587854 55569839..
  • [Please Note] - This oil tube pipe usually fails when the turbo get too hot or suggested to change whenever the oil turbo hose is replaced..
  • [Material] - Engine turbocharger oil return hose made of high quality materials, supplier quality similar as original. 55587854 pipe direct....
  • [What You Will Get] - We offer 55587854 turbo oil return pipe tube Fitor chevy cruze worry-free 2-years service, any questions about the turbo oil....
Check Stock

8 Size Heavy Duty Ratcheting Hose Clamp 6.1-26.1mm Adjustable Speedy Double Snap Grip Nylon Plastic Hose Clamp 68PCS Black

  • 【Superior Quality:】All the plastic hose clamp all made of high quality nylon material, which with high strength and high hardness, strong corrosion resistance. Durable enough for long time service than nomal hose clamps.
  • 【Hose Clamp Size:】This hose clamp kit contains 8 different sizes: 6.1-6.6mm, 8.1-8.6mm, 9.0-9.9mm, 12.3-14.4mm, 13.9-15.7mm, 16.3-17.9mm, 21.5-23.5mm, 24.5-26.1mm, totally 68 Piece. Packaged into a plastic grids box, each size package into a grid separately, won’t mixed together.
  • 【Adjustable Style:】These snap grip hose clamps with two row of teeth, you can adjust the size according to the diameter of the pipe, clamps are flexible and ductile, so you can install and remove them at any time. The range of clamps represents the minimum and maximum sizes they can be adjusted..
  • 【Easy to Installation】No tools needed for install. Simply to clamp it to the hose tail, and then engage teeth initially by hands. You could adjust the size (radius) of the hose clips to the size you need.
  • 【Widely Application】This hose clamps set total include 68pcs 8 size black double gripping hose clamps, Perfectly used for air hose, water pipe, automotive fuel line, silicone hose, etc. which are edges smooth will not hurt the pipe, perfect for va....
Check Stock

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

  • 「WHAT YOU WILL GET」- The gas hose connector kit mainly includes a 24in gas hose, 2 pc 15/ 16 -16 UN x 3/4'' FIP, 2 pc 15/ 16 -16 UN x 3/4'' MIP (Tapped 5/8'' FIP) and a sealing tape. Factory leak tested 100% pass!.
  • 「COMPATIBLE WITH」- A stainless steel gas line hose mainly use for connecting gas stove, gas dryer, furnace, gas water heater. Gas pipe outside dimension of 1'', inner diameter 3/4''. Thicker pipe diameter can transmission gas quickly..
  • 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
  • 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused f....
Check Stock

uxcell Double Wire Spring Hose Clamp 6mm Inner Dia Fit 6.5-7.2mm OD Hose Fuel Line Silicone Tube Spring Clips Zinc Plated 20Pcs

  • ☆【PRODUCT INFORMATION】--- In this set, we prepared 11 different sizes hose clamps for you, hose diameters includes: 7/8/9/10/11/12/13/14/15/16/17mm, 5-pcs each size, 55pcs in total, package in durable transparent plastic box, widely used them on a number of hoses that it can reducing the chances of a fuel or water pipe leak..
  • ☆【DURABLE AND STURDY】--- These spring hose clamps are made of high quality 65mn spring steel, which is strong and sturdy, corrosion resistance in a humid environment, it can be stored for a long time, have highly sealed, the surface of clamps are polishing that can effective prevent pipe damage.
  • ☆【WIDE APPLICATIONS】--- Spring hose clamps are used in a wide range of applications, suitable for hose/gas pipe/air hose/water pipe/automotive fuel line/silicone hose, connection fastening, etc..
  • ☆【EASY TO USE】--- You can easily move these on the tubes with your fingers, using pliers to open the surface and easily lower it on the tube, it can be reused, come with durable transparent box enough to accommodate all clamps in case of lost..
  • ☆【CUSTOMER SERVICE】--- We will provide you with reliable after-sales service. If you are unhappy with our product fro any reason or have any questions, please feel free to contac....
Check Stock

Glarks 120Pcs 10 Size Mini Fuel Injection Style Hose Clamp Assortment Kit For Diesel Petrol Pipe

  • ☆【Wide Hose Clamp Size:】 In this set, we provide 10 size of hose clamps which are 15pcs 7-9mm, 15pcs 8-10mm, 15pcs 9-11mm, 15pcs 10-12mm, 10pcs 11-13mm, 10pcs 12-14mm, 10pcs 13-15mm, 10pcs 14-16mm, 10pcs 15-17mm, 10pcs 16-18mm total 120pcs packed in a plastic box, easy to storage and carry..
  • ☆【Durable Quality:】 All the hose clamps are made of carbon steel, with zinc plated on the surface, corrosion and acid resistant, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • ☆【Adjustable Style:】 All the hose clamps with screws, you can adjust the size according to the diameter of the pipe, so you can install and remove them at any time with a socket wrench. The range of clamps represents the minimum and maximum sizes they can be adjusted..
  • ☆【Save Time and Money:】These mini fuel injection line style hose clamps are edge polished smooth to avoid damage to the hose, excellent for sealing hoses against loss of liquid, saving your time and money on costly repairs the pipe..
  • ☆【Function and Use:】These clamps are locking secure and tight, widely used in automotive, agriculture, aviation, material handling, marine, plant & construction..
Check Stock

Cole-Parmer Acetal Copolymer Hose Clamps, White, 0.702\ x 0.801\

  • Package includes 3 different sizes spring clips:10mm,11mm,15mm..
  • Made of high quality spring plastic,anti-corrosion and durable for long time use..
  • 360 degree inner ring precision design,prevent damage to the pipeline effectively.The handle design with raised points increases friction and makes it more labor-saving and comfortable to use..
  • Widely used for hose air hose,water pipe,automotive fuel line,silicone hose,etc..
  • Scope of application:automobile industry,automobile parts industry,agriculture,sanitary ware, medical treatment,plastic industry,mechanical oil road,pipe joint,etc..
Check Stock

Five Oceans FO4277 Brass Fuel Hose Barb 1/4 inches NPT Thread x 3/8 inches Hose, Crafted for Fuel Systems, Sharp-Edged Barbs, For Any Portable Tank

  • This Five Oceans Fuel line connector can be installed with confidence using our pipe-to-hose fittings..
  • Perfectly crafted for fuel systems, these pipe hose fittings are the ideal use for any portable tank..
  • This machined brass fitting features a male 1/4 inches NPT thread and sharp-edged barbs for 3/8 inches hose to provide excellent grip. Brass construction resists corrosion..
  • Barbs provide excellent gripping power for fuel line connections.
  • We recommend the use of fuel compatible thread sealant to prevent galling and provide the best possible connection.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

  • ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
  • ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
  • ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
  • ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock