Top Pe Pipe Extrusion Line

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

  • ...r Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe....
Check Stock

PVC Cutter 2-1/2\

  • 【Wide range of applications】: The ratchet cutter is designed up to 2-1/2-inch (63mm) outer diameter,cutting knife is very suitable for all kinds of plastic pipes(PVC, CPVC, PP-R, PEX, PE, etc),Great helper for home handy man, plumbers, electricians, and vehicle mechanics..
  • 【Heavy duty】: The tubing cutter blade itself is made of SK5 material with high strength and hardness. The surface is covered with Teflon coating,high hardness,smooth, sharp,Cutting quickly..
  • 【Ratchet design】: The pipe cutting machine adopts ratchet drive technology, cutting pipe with less effort and improving work efficiency. Pressing the self-locking during use can prevent the cutter from springing back, cutting the pipe faster, saving energy and safety.and the triangular convex point design at the blade can better cut the pipe..
  • 【Ergonomic design】: The bottom handle adopts ergonomic grip to protect the hand, which can make single stroke cutting quickly and easily, Suitable for long hours..
  • 【Safe and convenient for you】: Put the pipe to be cut into the corresponding knife edge, and continuously clamp and tighten the handle to easily cut the pipe. After use, just fasten the safety lock at the bottom, and the pipe cutting machine will become small and easy to carry o....
Check Stock

Car Hose Removal Plier Tool, Fuel Vacuum Tube Pliers Hose Removal Tool, Fuel and Vacuum Line Remover Separator Pliers Pipe Repairing Tool

  • Hose Removal: This line and pipe separator pliers is mainly used to remove stubborn hoses on heater water tanks, radiators, pumps, air filters, etc..
  • Durable Material: This line and pipe separator pliers are made of steel, sturdy and durable, not easy to damage.
  • Strong Practicability: This line pipe separator pliers has a compact design and strong practicability.
  • Comfortable Handle: This line pipe separator pliers is designed according to ergonomic principles, and the rubber-coated handle is labor-saving and comfortable to use.
  • Applicable Size: This line and pipe separator is suitable for removing fuel, vacuum or heater hoses with a diameter of 5/32 inches to 1/2 inches (4mm to 14mm).
Check Stock

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

  • Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
  • Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
  • High Quality Material: The connector made of high quality plastic and stainless steel.
  • corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
  • Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
  • Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 1-1/2 x 1 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 3/4 x 1/2 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

JOR Aquarium Siphon, Fish Tank Gravel Cleaner Kit, for Small Fish Tanks and Aquarium, 65-inches

  • ✔【Multifunctional Fish Tank Cleaner】This aquarium gravel cleaner integrates gravel cleaning, sand washing, water changer, and dirt suction functions. Composed of excellent PVC water pipe and ABS siphon head, it is resistant to extrusion, not easy to scratch and damage, and can be used for a long time. It can help you to achieve efficient cleaning of the fish tank, and there is no need to immerse your hands in water when using it!.
  • ✔【Safe Manual Design】Compared with most electric fish tank cleaning tools, this manual fish tank gravel cleaner is not electrified and will not harm your beloved fish during use. The manual design can also help you better control the pressure and water flow , So it is simpler, safer, and noiseless. In addition, the built-in 3D filter plug can effectively prevent your small fish, gravel and water plants from being sucked out..
  • ✔【Simple Working Principle】The principle of this aquarium siphon gravel cleaner is gravity, so the water outlet must be at least 19.7 inches lower than the water inlet when in use. The air-pressing button can produce a strong siphon after being pressed, so press the button several times until the water fills the entire inlet pipe, then release the button, and the water will flow out aut....
Check Stock

Twinkle Star Sewer Jetter Kit for Pressure Washer -100 ft Hose, 1/4 Inch NPT, Drain Cleaning Hose, Button Nose & Rotating Sewer Jetting Nozzle, Orifice 4.0, 4.5, 5.5, 4000 PSI

  • ...ong toughness sewer line hose with couplings, allowing hose and nozzles to fit through sewer line. PE tube, PVC cover, Dual-layer terylene reinforcement, which is very durable and can resist weather,oil, ozone and abrasion..
  • [3 + 1 Sewer Jetter Nozzle]: 3 Button Noses, 1 front jet at 0° to clear the blockage in the pipe, 3 rear jets at 33° pushes forward and washes loose debris before. Orifice: 4.0, 4.5, 5.5. Rotating Nozzle rotates 3 rear jets at 33° for shot blasting, the water unblock pipe, clear and flush debris. Orifice: 4.5..
  • [Widely Used]: Work with lots electric and gas-powered pressure washers up to 4,000 PSI. The sewer jetter hose can be used for pressure washer pump with American standard M22-14 Solid Brass. It also can be connect to trigger gun or pressure washer wand with 1/4″ quick connector..
  • [Tips]: Always disconnect the accessory when finished using it. Do not leave the fitting unattended or under pressure when not in use. If for any reason you’re not 100% SATISFIED, please let us know and our customer team will help you RETURN OR REFUND..
Check Stock

Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings

  • ...ic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
  • ❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
  • ❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the figure 8 end cap plugs used for clamp the end of 1/2" irrigation tubing for stopping water flow. These irrigation fittings can be used as connectors and end plugs for the irrigation hose after using hole punch, helping the hose continue to irrigate evenly during pressure fluctuations, and effectively use water resources..
  • ❀【Multiple Usage】: Ideal for use in elevated flowerbeds, lawns, vineyards, residential, farm, forest gardens, greenhouse gardening and agricultural watering applications.....
Check Stock

EAONE Misting System 50FT, Water Mister for Outside Patio, Cooling System Set Includes 15 Brass Nozzles 1 Faucet Connector, etc. for Greenhouse Garden Trampoline Fan Lawn Waterpark

  • Package Includes- 1*50ft preassembled misting Line, 15 T-type tees and 1 straight-through, 15 brass misting nozzles, 1* 3/4" faucet connector,1 misting hose cutter, 10 hanging snap clips, 40 hanging clamps, 40 cable ties,1 teflon tape,1 user manual.
  • Excellent Tube Material- Using PE pipe, the pipe thickness is 0.4mm, thicker than others. 50 FT misting hose, 15 T-Joints with a cutter, you can freely customize the length and angle you want. Flexible and sunlight-resistant black PU tubing for long-life use..
  • High-Quality Nozzles: Made from brass material, anti-rust and mist effectively. The holding part is made from recyclable plastic material, which is good sealing, no leak, sleek and sturdy..
  • Effective Misting Cooling Systems- The misting system produces water mist, which absorbs the heat from the outdoor surrounding in hot summer, and provides cooling outdoor areas, cools the surrounding air temperatures up to 20℃ - 68℉.
  • Wide range of uses- Misting cooling system widely apply for garden, vegetable land, landscaping, greenhouse, humidification, trampoline water park, umbrella, shade sail, swimming pool/animal cage.Bring you a cool summer.
Check Stock

Stihl 0000 930 4300 CF3 Pro Trimmer Line

  • The CF3 Pro Trimmer Line is formed using 3-component, tri-extrusion technology..
  • The CF3 Pro Trimmer Line is compatible with all STIHL nylon line trimmer heads, making the CF3 Pro at home on any landscape trailer or in any garage..
  • Its high-quality polyamide components ensure strong durability with excellent cutting performance..
Check Stock

Husky 5/8 in. Junior Tube Cutter

  • Husky 1-1/4 in. ratcheting PVC cutter cuts up to 1-1/4 in PVC (1-5/8 in. O.D.) for cutting PVC, CPVC, PP, PEX, PE, rubber hose.
  • Husky flexible tube cutter cuts PVC, CPVC, PEX pipe and flexible pipe.
  • Comes with foldable pouch for storage and transportation.
Check Stock