Top Hose Swage Kit

Hilmor 1839022 Swage Expander Head - 1-1/8 HVAC Swage Tool and Pipe Bender Accessory

  • SWAGE EXPANDER HEAD: A variety of heads available to make a picture-perfect swage.
  • CORRECT SIZING: Find the size that works for you. Expander heads range from 3/8" to 1-5/8".
  • COMPATIBLE: Use with hilmor's Compact Swage Tool and Pocket Size Deburring Tool.
  • VERSATILE: For use with soft metals - Copper, Steel, Aluminum, Brass tubes.
Check Stock

Swage It® S750C Primer Pocket Swager for Large and Small Primers - for The Dillon 750, XL750, XL-750

  • This will remove the crimp in the primer pocket that is common in military brass. This will mount to your press and if you use a case feeder you can swage over 1000 rounds / hour!.
  • Engineered to properly swage on the Dillon 750, XL750.
  • Our swager actually re-sizes the primer pocket and adds the correct fillet..
  • The easiest setup available to Swage on your Dillon XL50!7.
Check Stock

Hydraulic Cable Crimper and Swage Tool. Great for Crimping Battery Lugs, Large Electric Cables or Swaging Stainless Steel Cable/Rope.

  • Can crimp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job done..
  • Great to swage stainless steel wire/rope up to 1/8th inch. Although our test show it will crimp 3/16th we do not warranty it for use on 3/16th but we always accept returns in the first 45 days. Easily make a wire rail fence around the deck, yard, or install new rigging in your boat. Anytime you're installing new steel cable this does the job with less effort..
  • Hydraulic tools allow for way more force from a much smaller package. It requires a 36" mechanical crimper/swage tool to compare to the force this tool generates. Imagine trying to crimp a battery terminal under the hood with one of those. Trust us this is better..
  • Our kit includes 8 different size die heads, these can be adjusted 180° to help accommodate tight spaces. Please note this tool requires very little effort to crimp. During our testing we had a lot of over-crimping. It should never feel like the crimp has to be forced. Especially important on the 00 electric or the 3/16th stainless.....
Check Stock

Kaka Industrial FSM-16 Metal Shrinker Stretcher, High Quality Manual Metal Forming Shrinker Stretcher With Foot Pedal, 6" Throat Depth, 16 Gauge Mild Steel Capacity

  • Design: Each dapping punch is etched with its no/size and fits well into the wooden base next to their correct numbers for staying organized. This flat dapping box with small and medium sizes, a flat forming block with U-shaped grooves, and a swage block with U-shaped, V-shaped, and flat wire grooves..
  • Features: The smooth dapping block half-sphere cavities help to form perfect dome shapes without leaving any machining mark on metal. This equipment tool set is a vibration-absorbing base that reduces vibration for improved user comfort..
  • Multi Tool and Sizes: One Wooden Base, One Dapping Block 5x2.5x1", One Forming Block 8x1.5x1.5", One Swage Block 2.5x2.5x2", And One Dapping Cube 2.5x2.5x2.5", 36 Dapping Punches {Dimension 1" - 36" Inches ( 3.5mm- 25mm)}..
  • Usage: This jewelry-making metal forming set is great for forming soft metals for coin making, ring making, metal smiths, plus goldsmith & silversmith applications and repairs..
Check Stock

Dillon Precision 21079 XL 650 Casefeeder Small Pistol 110v SM Plate 21073 97074

  • The Super Swage 600 comes with: Large and small swage rods, .22 and .30 caliber backup rods, A 45ACP adapter..
Check Stock

Rectorseal 87011 Pro-Fit Precision Swaging Kit

  • Stopper ensures a consistent length of the flare/Swage surface.
  • Tip guides the bit into the tube & forms a standard 45° flare or consistent Swage.
  • Standard 1/4" hex shank fits directly into most power tools without adapter.
Check Stock

Lulultn 20 Pairs Stainless Steel Cable Railing Hardware Kit, for 1/8 Cable Railing System, for Wood Posts, Adjustable Angle, T316 Marine Grade

  • The angle of the cable railing hardware can be freely adjusted between 0 and 180 degrees, so they can be used in cable railing systems of various angles..
  • This kit is suitable for 1/8 inch cable railing, for wood post..
  • The kit is made of T316 marine grade stainless steel, which is rust-proof and durable..
  • This product includes 20 Adjustable Swage Toggle Turnbuckle Tensioners, 20 End fittings, 80 screws, 1 multifunctional small wrench.
Check Stock

Prima Causa HVAC Flaring and Swaging Tool Kit Flares Soft Refrigeration Copper Pipe with Tubing Cutter & Ratchet Wrench

  • Easy operation, save time and energy. Versatile tool kit in a combination tubing flaring and swaging to fit all your needs.
  • For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.....
  • The special cone eccentric revolution allows the internal opening gradually and accurate from 45° and regual flare without effor, preventing tube....
  • Eccentric cone will be rebound automatically after the work is finished, make the idle top head in revolution again for 1-2 times and have the flare....
  • Flaring tool kit is supplied in a Blow Mold Case.
Check Stock

48 Pack Swage Lag Screws Left & Right for 1/8\ Cable Railing kit,T316 Stainless Steel Stair Deck Railing Wood Post of Cable Railing Kit, Decking Railing Hardware, DIY Baluster Kit

  • 【LEFT & RIGHT DESIGN】 With the Left hand lag screws and Right hand Lag Screws design, it can rotate wire rope in the same direction, which resolves the problem of twisting the wire rope. Products without Left & right design might damage the cable. The wrench multi-tool is handy, it will help you drill the lag screw into the wood easily..
  • 【PROTECTOR SLEEVES】 These stainless steel protector sleeves will prevent the wire cable from wearing into the post, and maintain the cable rail tension for preventing wire rope vibration..
  • 【COMPATIBILITY】 These Cable Railing Kits are suitable for 1/8" diameter wire rope cable railing system, perfect for DIY your own wood baluster post stair or decking railing project, good for indoor or outdoor applications..
  • 【HIGH-QUALITY 】 Made of premium stainless steel for weather-tough durability, super-strong resistance to rust and corrosion, low maintenance and lasting beauty..
  • 【WHAT YOU WILL GET】 The cable railing kit includes 30 PCS left handed thread swage lag screws, 30 PCS right handed thread swage lag screws, 80 PCS protector sleeves, 2 PCS drill bits (The 6.5mm drill bit is used for drilling the protector sleeves holes, and the 5mm drill bit is used for drilling the lag screws holes), 1 PCS wrench..
Check Stock

Deck Man T316-Stainless Steel Adjustable Angle 1/8' Cable Railing Kit/Hardware for Wood Post，Marine Grade (10 Pack)

  • The angle of this professional cable railing hardware 0 to180 degrees could be free adjusted；So they can be used to all kinds of complex cable railing system：railing of stairs，deck railing and Garden fence….
  • This railing kit made of high quality Marine Grade T316-Stainless Steel，It is anti-rust、 durable and easy to maintain；.
  • It applies to standard 1/8″ inch cable， Hydraulic crimper is needed to connect this kit with the cable and 4# dies is suitable.
  • Max expanding size of the Swage Turnbuckle is 10 inch and it can be retract to 7 inch.
  • this item include 40 Pcs stainless steel countersunk screws and 1 pcs drill bit for wooden post, length of screws is 1.2inch；.
  • Under strict process control and with advanced technology, our products have high quality and excellent workmanship. We believe that you will like this kit..
Check Stock

Deck Man T316-Stainless Steel Adjustable Angle 1/8' Cable Railing Kit/Hardware for Wood Post，Marine Grade (30 Pack)

  • The angle of this professional cable railing hardware 0 to180 degrees could be free adjusted；So they can be used to all kinds of complex cable railing system：railing of stairs，deck railing and Garden fence….
  • This railing kit made of high quality Marine Grade T316-Stainless Steel，It is anti-rust、 durable and easy to maintain；.
  • It applies to standard 1/8″ inch cable， Hydraulic crimper is needed to connect this kit with the cable and 4-6# dies is suitable.
  • Max expanding size of the Swage Turnbuckle is 10 inch and it can be retract to 7 inch.
  • this item include 120 Pcs 304-stainless steel countersunk screws and 1 pcs drill bit for wooden post, length of screws is 1.2inch；.
  • Under strict process control and with advanced technology, our products have high quality and excellent workmanship. We believe that you will like this kit..
Check Stock

Uniweld UEK1 Hydraulic Swage Tool Kit

  • Kit includes: 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1-1/8″ O.D. Expander Heads, Inside/Outside Deburring Tool and Carrying Case with Storage Compartments..
  • Hydraulic power to easily make precision swages from 3/8″ to 1-5/8″ O.D. on soft tubing including copper, brass, aluminum and steel. Expander Heads 1-3/8″ and 1-5/8″ O.D. Sold Separately..
  • Compact pistol grip design able to work in tight spaces and the hydraulic lever mechanism and release button allow for quick and easy one-handed swage..
  • All tubing must be soft or fully annealed to prevent cracking, see product video on how to properly anneal tubing..
  • Save time and money by eliminating fittings, soldering joints, re-round deformed tubes and fittings for precision fit..
Check Stock