Top Hss Drill Saw

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

COMOWARE Drill Bit Set, 246 Pcs Drill Bits, Drill Bit Sets for Cordless Drill, Drill Driver Bit Set for Wood, Metal, Masonry, Cement and Screwdriver Bits Set Combo Kit

  • 【ALL-IN-ONE CONVENIENCE】- COMOWARE 246 pcs drill bit set includes a wide variety of bits for wood, metal, masonry drilling and screw driving. It is a must-have drill driver bit set in your home garage. Ideal for DIY project and home repair..
  • 【CAPABILITY & DURABILITY】- Drill bits and screwdriver bits are made from superior HSS material for improved strength and durability. And the titanium finish and black oxide coating help the bits deliver higher drilling performance on wood and metal. Whether you are a mechanic or a DIY enthusiast, this drill bits combo kit will assist you in every application..
  • 【WELL ORGANIZED CASE】- The 246 pcs drill bits sets come with a portable storage case with uncluttered layout. There is a sponge cushion inside to help prevent the drill bits from falling off or mixed use. And the blue labels with drill bit sizes on are designed for easy identification of the bit size..
  • 【COMPLETE DRILL ACCESSORIES KIT】- Screwdriver bit set: 66 x 1" screwdriver bits, 30 x 2" screwdriver bits, 6 x nut drivers and 2 x hex keys. Twist drill bit set: 57 x HSS titanium drill bits, 30 x HSS b....
Check Stock

HSS Hole Saw Kits, High Speed Steel Drill Bits Hole Saw Opener Cutting Tool for Metal, Copper, Stainless Steel, Iron Plate (thick less than 1/9\(3mm)) Big Size 9/15”(15mm) ~ 2-4/25”(55mm) Set of 8

  • Material: These metal hole saw arbors made of high speed steel, and carbide steel saw teeth, highly hardness, strong toughness, low abrasion, wear resistance, long using life.
  • Available application: These hole saw kits can be used for stainless steel sheet, iron plate, thin aluminum, copper, pipes, wood, plastic etc(less than 3mm). And it can compatible with pistol drill, bench drill, vertical electric drilling machine etc.
  • Set of 8 different size: 9/15”(15mm), 25/32”(20mm), 1-1/10”(28mm), 1-8/45”(30mm), 1-11/30”(35mm), 1-13/20”(42mm), 1-22/25”(48mm), 2-4/25”(55mm). Multi different size HSS hole saw set for your choose, it will meet most of your needs..
  • Attention: When you use the hole saw drill bit, you should fixed the plate first, and make the angle of drill and plate at 90 degree. Also, the rotating speed should be increased slowly, the bigger of saw, the slower of the speed, and add the fresh water to cool the saw when it working..
  • Warranty: We promise to provide satisfied service for all of client, if there is any quality issue, we can give you a new replacement or full refund..
Check Stock

M42 HSS Hole Saw Set, Ankoow 9Pcs 16-38mm Heavy Duty Hole Saw Tooth Cutting Opener Drill Bit for Wood Aluminum Iron Sheet Pipe Plastic

  • ❤ [9 SIZES HOLE SAW IN 1 SET]: 16mm, 18mm, 20mm, 22mm, 25mm, 30mm, 32mm, 35mm, 38mm. Each drill is individually packaged for easy carrying and finding the required specifications..
  • ❤[HIGH-QUALITY MATERIALS]: Hole saw set made of M42 HSS steel and BI metal, the blade is sharp with high hardness, stronger wear resistence and long service life..
  • ❤ [WIDE APPLICATION]: Suitable for Pistol Drill, Bench Drill,Vertical Drilling Machine etc. Widely used in Plate Hole, Home Wood, Galvanized Pipe, Fire Pipe, Plastic, Soft metal, Gypsum Board and Other Opening Operation. NOTE: Not recommend used in hard wood, hard metal and stone..
  • ❤ [SMOOTH AND FAST CUTTING]: Teeth are sharp with little vibration, pressurized spring Improves the removal speed of cylindrical iron filler in the hole and makes chip evacuation easier. And the hole can be quickly balanced, making the operation more stable..
  • ❤ [WARM TIPS]: Keep the drill be stable when drilling, the larger the hole saw is, the slower the drill rotary speed should be, this way can protect the centre bit from getting snapped. And we recommend that customers use cutting fluid to keep the hole saw cold during use to prevent overheating, damage or even burned up..
Check Stock

Qjaiune 51mm/2\ Hole Saw BI-Metal Heavy Duty Hole Cutter for Wood Cornhole Boards Plastic Drywall Fiberboard

  • Package Include: 1 x 2" hole saw, 1 x hole saw arbor, 2 x extra center bits, 1 x Allen wrench (Includes everything you need to do it yourself).
  • High Performance Matieral: The 2in hole saw is made of HSS carbon steel & Bi-metal steel, with hardness up to 65HRC, which has superior performance and higher cutting strength than others hole saws.
  • Proessional Cutting: With the non-binding clean edge design, this hole saw cuts smooth and easy. The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole..
  • Appliaction: Hole Saw Drill Bit is designed for wood / plastic cutting, smooth and fast cutting the holes through wood, drywall, plaster, cutting a smooth and clean circle for your project such as corn hole boards, recessed lights, speakers, air ducts, etc..
  • Purchase Guarantee: Please rest assured to buy our products. If you are not satisfied with the product, we provide a 100% money back guarantee within 90 days..
Check Stock

HSS Hole Saw Kits for Metal, 15pcs High-Speed Steel Hole Saw Bits, Sharp and Durable, for Cutting Holes on Wood, Plastic Sheet, Stainless Steel, Iron, Aluminum Plate(Hole Size: 15-53mm, 0.6-2.1in)

  • 【Hole Saw Kits】- There are 15 sizes of hole saws for you to choose. You can cut holes from 15mm/0.59in to 3mm/2.1in according to your needs..
  • 【Resistance and Durable】- The hole saw kit is made of HSS high-speed steel. The saw blade is extremely sharp, low consumption, durable, impact resistance and wear resistance..
  • 【High Hardness】- The saw blade is quenched and has high hardness and strength(hardness 59-60HRC). Hole saw kits can drill about 7/9" depth for the wood, and 1/5" for the stainless steel..
  • 【Individual Package】- Each HSS hole saw is individually packaged in a plastic box. You can easily use and store them..
  • 【Wide Range of Applications】-The carbide teeth of the hole saw kit is able to cut clean, round holes in stainless steel, mild steel, iron, aluminum plate, alloy plate, plastic sheet, copper and brass..
Check Stock

WoWSupM 6-3/8 ,4-3/8 inch Recessed Light Installation kit Carbide Grit Hole Saw Cutting Drywall, Ceilin Tile　for 6” ,4”Lights

  • 【Package】The Carbide grit hole saw Installation light kit includes:1pcs of 4-3/8”, 1pcs of 6-3/8" carbide drill bits(Black or Red), 1pcs of 0.43” hex shank arbor, 2pcs of Ø0.25”x 3.5" HSS pilot drill bits..
  • [Application] This Carbide grit installation light hole saw kit is For 4”, 6” recessed light, Cutting Drywall, Plaster, Ceiling ,Corn Hole Board, Acoustical Tile. Cutting depth: Up to 1” ..
  • [Advantage 1] The carbide grit teeth hardness over 80HRC.It is more sharp ,hard. It’s a longer life in abrasive material..
  • [Advantage 2] The specially back removes the plug easily. It’s faster than bi-metal hole saw 2 times..
  • [Advantage 3] The specially sharp teeth cuts more smooth,clean . It is more faster than tradition carbide grit hole saw up to 30%. It is more faster than tradition bi-metal hole saw up to 50%..
Check Stock

Qjaiune 108mm/4.25\ Hole Saw BI-Metal Heavy Duty Hole Cutter for Wood Cornhole Boards Plastic Drywall Fiberboard

  • Package Include: 1 x 4.25" hole saw, 1 x hole saw arbor, 2 x extra center bits, 1 x Allen wrench (Includes everything you need to do it yourself).
  • High Performance Matieral: The 4.25in hole saw is made of HSS carbon steel & Bi-metal steel, with hardness up to 65HRC, which has superior performance and higher cutting strength than others hole saws.
  • Proessional Cutting: With the non-binding clean edge design, this hole saw cuts smooth and easy. The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole..
  • Appliaction: Hole Saw Drill Bit is designed for wood / plastic cutting, smooth and fast cutting the holes through wood, drywall, plaster, cutting a smooth and clean circle for your project such as corn hole boards, recessed lights, speakers, air ducts, etc..
  • Purchase Guarantee: Please rest assured to buy our products. If you are not satisfied with the product, we provide a 100% money back guarantee within 90 days..
Check Stock

MKC 6 inch Hole Saw Cutter with Big Arbor & Extra Measure Tape for Wood, PVC, MDF, Drywall, Aluminum

  • 2，Ideal for Wood, Plasterboard, PVC, MDF, Drywall, Thin Aluminum & Copper (NOT for black Metal). For home projects on air ducts, speakers, ceiling lights, etc..
  • 4, The hole saw is made of BI-metal strip with high toughness and high hardness. With the clean edge design, cutting smooth and easy..
  • 5, TIPS: When you drilling: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
Check Stock

MKC 5 inch Hole Saw Cutter with Big Arbor & Extra Measure Tape for Wood, PVC, MDF, Drywall, Aluminum

  • 2，Ideal for Wood, Plasterboard, PVC, MDF, Drywall, Thin Aluminum & Copper (NOT for black Metal). For home projects on air ducts, speakers, ceiling lights, etc..
  • 4, The hole saw is made of BI-metal strip with high toughness and high hardness. With the clean edge design, cutting smooth and easy..
  • 5, TIPS: When you drilling: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
Check Stock

Huanyu Mini Table Saw Multifunctional Liftable Blade 6T with Miter Gauge 300W Power DIY Woodworking Handmade Tool 885 Motor Cutting Polishing Carving Punching Metal Jade Plastic (Fits Group 3, Golden)

  • 【INTRODUCTION:】 The table saws of this link are all 6T versions. It has the function of adjusting the lifting of the saw blade, and the combination of different accessories can realize the functions of cutting / grinding / engraving / drilling. Mini but powerful professional table saw to help you complete all kinds of DIY, handmade works, wooden models, metal models, handmade crafts! Multi-function in one, you will love it!.
  • 【PROFESSIONAL】885 upgraded motor, high power 300W, easy to complete professional cutting work, reliable and efficient. The angle of the set square and the distance of the aluminum backing can be adjusted to precisely control the cutting angle!.
  • 【EXCELLENT DESIGN: 】the saw blade can be raised and lowered, and the cutting depth is adjustable from 0-29mm! Adjustment range of drill chuck: 0.6-9MM.
  • used with accessories, cutting, grinding, engraving, drilling, all done!.
  • net weight is about 4.5kg, working decibel is extremely small, mute and low noise. Portable and small size, save working space! Miniature multi-functional table saw gives you the perfect processing experience!.
  • 【ACCESSORIES GROUP】 -【G1: alloy woodworking saw blade can cut wood / acrylic / ABS plastic, etc. -【G2: On the....
Check Stock

HSS Hole Saw Kits for Metal, Rocaris 15 pcs High-Speed Steel Hole Saw Cutting Kit Drill Bits Opener Cutter Tool for Stainless Steel,Copper, Iron 15~53mm

  • The gears is made from HSS and the rigidity varies from the hole saw has a twist drill bit inside, which is undetachable..
  • 64HRC to 65HRC. Sharp gears and anti-cutting with lower consumption make the product a long service life..
  • Carbide teeth for fast cutting of clean, round holes.Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass.Can drill about 20mm depth for the wood, and can drill about 5mm for the stainless steel.
Check Stock