Top Hss Tool Bits

Hi-Spec 99 Piece SAE Multi Drill Bit Set. 14 Sizes from 1/16in to 3/8in. Metal, Wood, Drywall & Plastics Drilling with HSS Titanium Steel Bits. Complete in a Tray Case

  • ...ng jobs in metal, wood, drywall and plastics.
  • 99 PIECE SAE SIZES: The most-used compatible round-shank sizes of HSS metal twist drill bits needed for a range of DIY tasks – 99pc x 14 Sizes of HSS Bits: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 7/32, 15/64, 1/4, 5/16, 3/8”.
  • HSS BIT DRILLING: High-Speed tool steel (HSS4241) cuts faster, withstands higher temperatures and retains hardness for longer than ordinary high-carbon steel. Fit to electric power drill drivers and start repairs, installation, and renovation in metal, wood, and plastics.
  • TITANIUM-COATED FOR LIFE: The gold-coloured vapour-deposited Titanium Nitride (TiN) coating improves bit longevity and sharpness. Get increased surface hardness and lubrication properties to improve wear resistance, reduce friction and sticking.
  • KEEP IT TOGETHER: A slim storage tray case keeps bits in separate compartments with a foam insert for further protection. Sizes are printed on the case lid underside and its steel catch snaps shut to makes sure it doesn’t unexpectedly pop open.
Check Stock

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • Replacement tapered counter sinker drill bit set 3 Piece #10 (3/16") bit replacement Only (Without the 4 Flute cutter countersink counter-bore), made to replace the 3/16” bits of #10 countersink drill bit set for wood , with 1 Hex Wrench (1/8 inch Allen Key) included. Replacement bit countersink with hex shank compatible with 1/4" standard Quick Change chuck including impact drills.
  • Countersink replacement bits made for countersink drill bits for wood. with wider flute for increased chip flow. Replacement drill bits have logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Counter sinker drill bit replacement set, drill bits secured with pin, professional FTG drill countersink set Maximum Torque. Packaging set combination unique design protected by US Copyright Office.
  • Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
Check Stock

Drill Bits Short Length Threaded Shank Short Series Drill Bit Set 3 Tight Fit Tools 00133

  • Drill bits are made of M7 high-speed steel (HSS), for drilling hard materials.
  • 135-degree split-point, 1/4-28 threads and a 5/16 inch hex adapter for removal of drill bit.
  • Three lengths of drill bits: Longs=2-3/8 inches.
  • Drill bits are black oxided to prevent chip-to-tool welding and corrosion.
  • Drill bits comply with National Aerospace Standard NAS965.
Check Stock

Drill Bits Short Length Threaded Shank Long Series Drill Bit Set 2 Tight Fit Tools 00132

  • Drill bits are made of M7 high-speed steel (HSS), for drilling hard materials.
  • 135-degree split-point, 1/4-28 threads and a 5/16 inch hex adapter for removal of drill bit.
  • Three lengths of drill bits: Longs=2-3/8 inches.
  • Drill bits are black oxided to prevent chip-to-tool welding and corrosion.
  • Drill bits comply with National Aerospace Standard NAS965.
Check Stock

Drill Bits Short Length Threaded Shank Stub Series Drill Bit Set 4 Tight Fit Tools 00134

  • Drill bits are made of M7 high-speed steel (HSS), for drilling hard materials.
  • 135-degree split-point, 1/4-28 threads and a 5/16 inch hex adapter for removal of drill bit.
  • Three lengths of drill bits: Longs=2-3/8 inches.
  • Drill bits are black oxided to prevent chip-to-tool welding and corrosion.
  • Drill bits comply with National Aerospace Standard NAS965.
Check Stock

WEN 230282A 282-Piece Rotary Tool Accessory Kit with Carrying Case

  • Features 282 accessories for sanding, carving, deburring, cutting, drilling, grinding, polishing, engraving, as well as many other verbs.
  • Wire-bristled brushes work great for rust removal, paint stripping, pumpkin carving, and more.
  • Grinding discs and bits perfect for sharpening knives or trimming dog toe nails.
  • Includes diamond-coated metal bits, HSS cutters, sanding discs, cutting discs, spindle sanding bands, buffing wheels, drill bits, polishing paste and more.
  • Compatible with the WEN rotary tools, as well as any other rotary tool that accepts bits with 1/8-inch shanks.
Check Stock

Viking Drill and Tool 53550 Type 952 Standard HSS Wood Auger Bit, 3/4 x 24"

  • High quality auger bits with hex shanks produced from alloy tool steel.
  • Medium - fast screw point for general drilling applications.
Check Stock

Sipery 10Pcs M35 Cobalt HSS Twist Drill Bits 3mm with Straight Shank, Drilling for Stainless Steel, Copper, Aluminum Alloy and Softer Materials

  • Specification - 10Pcs 3mm cobalt drill bits, each kit contains a total of ten drill bits in the same size, Blade length: 33mm/1.3inch, 135 degree point, straight shank..
  • Material - HSS Cobalt high speed steel for super abrasive resistance in tough metals, improve much higher heat resistance because of cobalt steel's high red hardness..
  • Durable - HSS Cobalt Drill Bit provide strong durable performance compared to typical hss drill bits..
  • Easy to Carry - The twist drill bits are housed in plastic case for easy storage, easy to carry out homework..
  • Multi-purpose Use - HSS Drill Bits are successful in cutting hard metals such as stainless steel, copper, aluminum alloy, and also can be used for softer materials..
Check Stock

Sipery 10Pcs M35 Cobalt HSS Twist Drill Bits 4mm with Straight Shank, Drilling for Stainless Steel, Copper, Aluminum Alloy and Softer Materials

  • Specification – 10Pcs 4mm cobalt drill bits, each kit contains a total of ten drill bits in the same size, Blade length: 43mm/1.7inch, 118 degree point, straight shank..
  • Material – HSS Cobalt high speed steel for super abrasive resistance in tough metals, improve much higher heat resistance because of cobalt steel’s high red hardness..
  • Durable – HSS Cobalt Drill Bit provide strong durable performance compared to typical hss drill bits..
  • Easy to Carry – The twist drill bits are housed in plastic case for easy storage, easy to carry out homework..
  • Multi-purpose Use – HSS Drill Bits are successful in cutting hard metals such as stainless steel, copper, aluminum alloy, and also can be used for softer materials..
Check Stock

WORKSITE 102PCS Drill Bits Set and Screwdriver Bits for Metal, Wood, Masonry, Drilling and Driving Accessories with Screws, Anchors and Roll Tool Pouch

  • Size list: 1 pc magnetic bit holder, 10 pcs CRV 1-inch screwdrive bits.
  • Drill bits: 4 pcs 5/32”, 4 pcs 3/16”, 4pcs 15/64”, 4pcs 5/16”.
  • Screws: 17pcs 1/8”screws, 10 pcs 1/6”screws, 10pcs 1/5”screws.
  • Plastic wall anchors: 22pcs 1/5”anchors,12 pcs 1/4”anchors, 8pcs 1/3”anchors..
  • Sturdy Drill Bits - The wood, metal, masonry drill bits are made of High Speed Steel (HSS) with titanium coating for hardwood, softwood, plywood, wood board, plastic, metal, concrete and other woodworking jobs..
  • Magnetic Bit Holder and Screwdriver Bits: The magnetic hex shank extension bit holder fits with almost familiar kinds of impact drivers. The screwdriver bits are made of S2 tool steel, hardness up to 60HRC, which has higher resistance of vibration and impact forces to chrome vanadium steel(CR-V)..
  • Anchors and Screws: Drywall anchors offer you the most effective solution for hanging or installing almost any type of item to drywall especially when there is no convenient stud located behind the wall..
  • Easy to Store and Portable - It comes with a roll tool pouch designed with different slots inside to make bits stay in place, without falling everywhere and missing..
Check Stock

Billy Goat KV600 Lawn and Litter Vacuum, 190 cc Briggs, Mesh Bag with Dust Skirt

  • 【Professional Drill Dust Extraction Tool】The unique internal design and flexible seal to ensure dust containment, and professional dust extractor tool can provide a surface powerful suction of almost 8 lbs, it means that can be adsorbed to almost any surface easily and fast , giving you or family an eco-friendly and dust-free environment when drilling during extended use..
  • 【Hands-Free Use】The dust collector is a great creative new dust extraction tool for the best possible ergonomic comfortable solution. Designed for alll drill types, our vacuum dust collector is perfect for a host of removing the dust and debris from drill hole. Fits almost any hose mounted vacuum and works with corded and cordless vacuums..
  • 【Wide Compatibility】The Hand-free dust collector works effectively with HSS bits, bullet bits, tile bits, masonry bits, hole saws and even spiral bits. The upgraded dust extraction attachment minimize dangerous airborne particles to keep up with the demands of the user..
  • 【Fast Capture Dust】It is made of ABS and flexible polymer that can expand and contract under tension, it easy to absorb larger materia....
Check Stock

NEIKO 10218A Countersink Drill Bit Set for Wood and Metal, 1/4” Tri-Flat Shank, 5 Piece Countersink Bits, M2 High Speed Steel

  • PRECISION MACHINED TIPS: These countersink drill bits come with 1/4" tri-flat shanks with a precision-ground 82-degree tip for sinking holes into wood, machinable metals, mild steel, fiberglass plastic, and more and fit common handheld power drills..
  • M2 HSS MATERIAL: Each metal countersink bit is made of high quality M2 HSS material for extended drill bit life and efficiently drills countersinks to help create strong joints between screw and material..
  • FIVE-FLUTE DESIGN: Each of the 5 counter sink bits utilizes a five-flute design that reduces vibration for smoother drilling as found in woodworking with a 1/4-inch shank that allows easy gripping..
  • BIT HOLDER CASE INCLUDED: Each countersink drill bit set comes with an aluminum case for carrying and easy storage..
  • BIT SIZES: Each countersink tool set contains 1/4.
Check Stock