Top Hss Twist Drills

Utoolmart Center Drill Countersink Lathe Bit Mill Tool Combined Drills Plain Type Imperial 3/8-inch Combined Countersinks Drills Set Tool HSS-6542 Countersinks 5 Pcs

  • 【Dimension】- The shank diameter of this center drill is 3/8-inch, the working edge length is 5mm / 0.20-inch, and the total length is 55mm / 2.17-inch..
  • 【Material and Features】- High Speed Steel, high hardness, rustproof, solid, durable and excellent for use..
  • 【Durable and Resistance】- Center drill bit is made of HSS high speed steel, with extremely sharp blade, low consumption and durable with impact resistance, wear resistance..
  • 【Convenience】- Easy to use and install, change bits fast which one-handed load and release. Available for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum and so on..
  • 【Precisely Processing】- Center and spotting drills are used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walking..
Check Stock

uxcell 1mm Diamond Twist Drill Bits High Speed Steel for Glass Sea Shells Stone Tiles 10 Pcs

  • [SIZE] - 1mm diameter, 11mm length twist drill bit with 0.7mm shank..
  • [MATERIAL] - Diamond coated high speed steel(HSS) is made by spiral technology, has both toughness and hardness, is not easy to break. The drill bit is sharp, and is easy for chip removal..
  • [APPLICABLE MACHINE] - Widely used in rotary tool such as hand drills, drill press, flex shafts, bench drill and hanging mill..
  • [APPLICATION] - Suitable for drilling small holes on glass, soft metal, sea shells, jade, pearls, drywall and son on..
  • [NOTICE] - When drilling, it is necessary to add cutting fluid in time to lubricate and cool down, which can get a better drilling hole wall, extends the service life and drilling accuracy..
Check Stock

Combined Countersinks Drills Set Tool 5 Pack Center Drill Countersink Lathe Bit Mill Tooling Set Tip Angle 60 Degree Bits for Metal Alloy Copper Iron Aluminum Titanium and Wood Working

  • ✔ Material and Features: High Speed Steel, high hardness, rustproof, solid, durable and excellent for use..
  • ✔ Application: 60° countersink angle fits all standard centers, Used for centering work ends, where the work piece is to be revolved on machine centers..
  • ✔ Durable and Resistance: Center drill bit is made of HSS high speed steel, with extremely sharp blade, low consumption and durable with impact resistance, wear resistance..
  • ✔ Convenience: Easy to use and install, change bits fast which one-handed load and release. Available for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum and so on..
  • ✔ Precisely Processing: Center and spotting drills are used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walking..
Check Stock

0.3-1.6 mm Micro Mini Drill Bit Set Tiny Drill Bits Small Shank Full-Ground HSS Twist Drill High Speed Steel Boards Tiny Drill Bits for Dill (40 Pieces)

  • Material of the product: the small drill bits are made of HSS high speed steel, reliable, solid and durable, and will not be damaged easily after long-term use.
  • Product packaging: the package contains 40 pieces fully ground high-speed steel mini twist drills in total, 2 boxes of transparent plastic drawer box and each box of 20 pieces.
  • With sufficient quantity, these beautiful and elegant drills can meet your needs and are easy to use.
  • Scope of application: small drill bits fit well for woodworking drilling, electronic product maintenance, household repair, can drill boards, plastic products, circuit boards and so on.
  • Size specifications: tiny drill bits are in various sizes: 0.3 mm, 0.35 mm, 0.4 mm, 0.45 mm, 0.5 mm, 0.55 mm, 0.6 mm, 0.65 mm, 0.7 mm, 0.75 mm, 0.8 mm, 0.85 mm, 0.9 mm, 0.95 mm, 1.0 mm, 1.2 mm, 1.3 mm, 1.4 mm, 1.5 mm, 1.6 mm.
  • Warm reminder: please do not drill for hard metal materials, and check the size information before purchasing.
Check Stock

Gyros® HSS Wire Gauge Mini Twist Drill Bit Set |Includes 20 Micro High Speed Steel Bit Sizes #61 to #80 | with Convenient Clear Dome Storage Case (45-22010)

  • ...s allow use with a wide variety of tool holding systems. Use with Gyros Mini Adaptor Chuck 45-01801 to use with most power rotary tools. Use with Gyros Swivel Head Pin Vise 97-01818 for all your hand drilling needs..
  • COMPLETE 20 PIECE SET - Gyros Mini Drill Bit Set comes complete with a range of small diameter twist drills sizes #60 (.0400”/1.016mm) through #80 (.0135”/.343mm) and therefore is preferred by Professional Craftsmen, Model Makers, Hobbyists, Jewelers, and Do-It-Yourself enthusiasts, and is a Must Have for all your drilling tasks..
  • CONVENIENT AND EASY STORAGE – These Gyros Mini Drill Bits come packaged in a convenient clear dome shaped storage case, with a protective pressure fit stand to secure drills and prevent any damaged or lost bits. The Gyros Micro Drill Bit stand also has an imprinted numeric gauge guide for quick and easy bit identification..
  • WIDE APPLICATION – All Gyros Wire Gauge Mini Drill Bits is perfect for all projects that require the drilling of precise holes. Gyros Micro Drills are ideal for gold, silver, wood, hard and soft metals, plastic, PVC, beads, and jewelry. Some people may even try to use it to clean emulsion tubes and jets in small carburetors. This Gyros Wire Gauge Mini Drill Bit set with a Clear Dome Sto....
Check Stock

1/2” Reduced Shank Drill Bit, HHS-G Black Oxide Twist Dill Bit Metric Size Steel Metal Plastic Wood(16mm)

  • Common flute and overall length for minimal adjustment during tool changes.
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Hex shank, which is suitable for most drills,fit for electric screwdrivers, hand screwdrivers, electric drills, air drills and so forth..
Check Stock

NEIKO 10218A Countersink Drill Bit Set for Wood and Metal, 1/4” Tri-Flat Shank, 5 Piece Countersink Bits, M2 High Speed Steel

  • PRECISION MACHINED TIPS: These countersink drill bits come with 1/4" tri-flat shanks with a precision-ground 82-degree tip for sinking holes into wood, machinable metals, mild steel, fiberglass plastic, and more and fit common handheld power drills..
  • M2 HSS MATERIAL: Each metal countersink bit is made of high quality M2 HSS material for extended drill bit life and efficiently drills countersinks to help create strong joints between screw and material..
  • FIVE-FLUTE DESIGN: Each of the 5 counter sink bits utilizes a five-flute design that reduces vibration for smoother drilling as found in woodworking with a 1/4-inch shank that allows easy gripping..
  • BIT HOLDER CASE INCLUDED: Each countersink drill bit set comes with an aluminum case for carrying and easy storage..
  • BIT SIZES: Each countersink tool set contains 1/4.
Check Stock

Extra Long Brad Point HSS Drill Bit, 2-5mm Diameter x 150mm Length, Straight Shank Twist Drill Bits for Wood Plastic and Aluminum

  • [Metal Drill Bits Set]: The extra long HSS drill bit set comes with the following diameter: 2mm, 3mm, 3.5mm, 4mm, 5mm.
  • [Extra Length]: Length (150mm~160mm) is great for general purpose use on hand drills and allows you to access hard to areas where jobber length drills can not go.
  • [Material]: Made of High speed steel, the drill bits have a high hardness for fast, smooth cutting of plywood, hard wood and soft wood, swift bore.
  • [Wide Applications]: Ideal for most drilling jobs and materials such as aluminum, iron, wood, plastics.
  • [100% Satisfaction]: If you have any question about this item, please feel free to contact us, we will help you within 24 hours on week days.
Check Stock

Hakkin 32 Pcs Pin Vise Hand Drill for Jewelry Making, Mini Manual Drill Kit - 0.8-3.0mm HSS Micro Twist Drill, Pin Vise, Carving Clamp and PCB Drills, Rotary Hand Press Drill for Resin, Wood, Plastic

  • 【Value Package】The pin vises hand drill bits set include 20 pcs 0.8-3.0mm twist drill bits, a pin vise hand drill for resin, a mini carving clamp and 10 pcs 0.3-1.2mm PCB Drills. Our precise hand drill set make small holes easily in Resin, Pearls, Wood, Plastic, Polymer Clay, Bead, to make necklace, pendant, earring, bracelet, keychain, model, sculpture, etc..
  • 【Ergonomic Design and Humanized Design】The hand pin vise is made of aluminum alloy. Easily adjustable 3 jaw chuck to clamp the drill and keep the drill upright. The adjustable range of the clamp is 0.3-3.4mm. The tail of the compact manual model hand drill can be unscrewed and the drill bit can be neatly stored inside, don’t worry about losing it. Pen size design, easy to carry and store..
  • 【Mini Bench Clamp Instead of Hand Held】Hakkin jewelry drill bit set has an indispensable tool, that is mini bench clamp, its body is made of aluminum alloy, compact and handy, hold the item in position and prevent fingers from being hurt. The small drill press clamp supports 0 - 2.2 inch (0-57 mm), supports round, square and irregular objects, ideal for holding small parts, Watch repairing, Sculpture, Craft, Jewelry and DIY Carving..
  • 【Many Sizes Bits】The jewelry drill is Includes 30 pieces of p....
Check Stock

Blue Boar Master Plumbers Kit-12 Sizes Mega Tungsten Carbide 2-1/4” Hole Saws. Cut 10x Faster, 3x Larger, 40x More Holes Using Cordless Drills. For Plywood, MDF, Particle Board, Hardie Board.

  • 12 Carbide Hole Saws: 3/4", 7/8", 1-1/8",1-3/8",1-1/2",1-3/4",2-1/4", 2-5/8", 3", 3-1/2", 4", 4-1/2".
  • One 5/8"-18 arbor with 7/16" shank, 1/2"-20 adapter, hex wrench.
  • NOT NAIL RESISTANT - 3 pilot bits (HSS twist, Carbide Masonry, Tungsten Carbide Tipped for woods).
  • 2-1/4" cutting depth best when USED with 18v Cordless Drill set on SCREW SETTING.
  • ****NOT for use with 1/2" stud drills such as Milwaukee Hole Hawg which will rip the teeth off ****.
Check Stock

Prolinemax 18 Pc Metric HSS Tap & Drill Set

  • Tap Sizes: M2.5 x 0.45, M3.0 x 0.50, M3.5 x 0.06, M4.0 x 0.70, M5.0 x 0.80, M6.0 x 1.0,M8.0 x 1.25,M10.0 x 1.50,M12 x 1.75.
  • Drill Metric Sizes: 2.05,2.50,2.90,3.30,4.20,5.00,6.70,8.50,10.2mm.
  • Case Overall Dimension: 8''L x 4-3/8''W x 1-1/4''H *Estimate Only*.
Check Stock

Annular Cutter Set 6 Pcs, Weldon Shank 3/4”, Cutting Depth 1”, Outside Diameter 1/2 to 1-1/16 Inch, Mag Drill Bits Kit for Magnetic Drill Press by S&F STEAD & FAST

  • Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life.
  • 6 HSS core drills with Outside Diameter in inches: 1/2, 9/16, 11/16, 13/16, 15/16, 1-1/16, all with 1 inch cutting depth.
  • CNC-machined high precision cutters with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results.
  • Compatible with various brands of magnetic drills including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is not included in this pack.
  • Sturdy plastic case holding 6 annular bits, 1 pilot pin, 1 hex wrench.
Check Stock